Multiboot

N

nilssonn

Registered
Messages
40
Hi!
I have problem getting multiboot to work
I have a DGC image flashed on the box
Flashing in multiboot, after that the box want start, just says booting.

What images is the best for the box, and what im i doing wrong with multiboot and USB stick?

I want to run CCCAM with the image, running Beta 4 now on the DGC image and works, but some freezing on some channels

Please help...
 
J

jamie-warez

VIP
Messages
700
CCCAM Is fake its not really CCCAM Its mgmcamd renamed.....

Use oscam as cccam client. its stable no crashing and no breakups...

As for your usb booting from usb most Dgs flash images already have it on them so you don't need to install any other multiboot...

Now for multboot to work you must have your partitions setup like sda1 as your main boot partition.
you can edit your multi-boot to boot from sda2 this is the best way as dgs images always make sda1 as a swap partition...

you can use this Nice software Here http://www.sat-universe.com/showthread.php?t=158984&page=3

this neet software can be used to install enigma2 to your box and also to edit the multiboot

If you need any help let me know...
 
Last edited:
N

nilssonn

Registered
Messages
40
Ok!
If Cccam is fake i need help to get oscam to work
I have installed it, edited oscam.server and oscam.user and i think the last one named oscam.config.

Is there any guide on how to get the usb stick to work.
how to partion it and so on

Thanks

cheers
 
J

jamie-warez

VIP
Messages
700
For help with Oscam Please let me know what provider you are using.. Sky/etc

for help with multiboot are you using USB or sata hdd?
 
Last edited:
zboard

zboard

Registered
Messages
153
what is your question please are you asking me to configure your oscam or are you asking me to configure your multiboot files?

thanks?
 
N

nilssonn

Registered
Messages
40
What i was understanding, so is multiboot included in min image???
Im running cccam today and gets alot of freezing
And i read that oscam works the best.

Do i need multiboot?
Do i need sifteam on USB?

Thanks
 
I

ishfaq_mr

Registered
Messages
1
Thanks

dear forum members,

thanks to all for the useful forum for the receivers informations.

Regards,

Ishfaq
 
D

dorosk

Registered
Messages
100
nilssonn said:
Can anyone help me?
Link to guides that works?
PM?

Needs to get tthis box to work now :)
Click to expand...

Firs of all you have to do some reading to stop confusing things.
Multiboot and CAM are two totally different things.
With Multiboot you have the ability to have different images (operating systems) on your receiver and use them when you want (one at a time).
With CAMs,like oscam, cccam, mgcamd,incubus, you can connect to servers or locally to use yours or others cards.

For people to help you set up your receiver tell us what image you are using, to what Cccam version you want to connect to, what are the main TV packages you are viewing.


Or you can do the below.

1. Back up your settings with PC editor.
2. Flush PGI 7.2a image (it includes very good instructions).
3. Restore your settings.
4. Use this to install cccam and incubus
4.1 In the text file delete the 2 lines with "changezoom"
4.2 In the text file put your receiver IP address
4.3 Put your settings in cccam.cfg and incubusCamd.conf
5. After installing the above, your are set up to use cccam. You can easily change cam in PGI.cfg file to any one of the others already installed.

CCCam4 works OK and stable with CCCam servers up to 2.1.1, for higher you can use OSCAM or Incubus. There is a lot of instructions in the forum to set them up.
 
N

nilssonn

Registered
Messages
40
I know what multiboot is, i know what cams is
Im runnin other boxes with cccam and sifteam

But what i have understood with ipbox 9000 is that you need to run multiboot for sifteam to work.
Then i read that i dont need to install multiboot when running DGS image, multiboot allready included. Is that right?

Im running cccam on the ipbox today with a DGS image, but it doesnt work any good, it freezes the picture often.
So i want to install Oscam, but i cant get it to work.
Have followed several guides with no luck.

Cheers
 
J

jamie-warez

VIP
Messages
700
nilssonn

is your astra sly uk ?
if so i can help with this if you are using other provider then you will need to know your Providers CAID and BetaTunel settings...
 
Last edited:
N

nilssonn

Registered
Messages
40
I have configure oscam like this
What have i done wrong?
Doesnt get any picture.
When i run cccam.214.cam it works ok, but freezez often.

Im running
Image = SifTeam 0.3.1 r12413 With Skin BlackOsool For IpBox 9000HD
Oscam = Oscam-dvbapi-2319.tar

[OSCAM.SERVER]
#
## reader 0 SETTED GOOD FOR SKYITA CARD
[reader]
Label = SkyItalia
detect = CD
Protocol = internal
Device = /dev/sci0
Fallback = 0
Group = 1
emmcache = 1,3,2
BoxID = TR010NA
ident = 000000
#
# **************** COMMENT (OR REMOVE) IF HAVE ONLY ONE INTERNAL READER ******************
## reader 1 SETTED GOOD FOR TIVUSAT CARD
[reader]
Label = tivusat
detect = CD
Protocol = internal
Device = /dev/sci1
Fallback = 0
Group = 1
caid = 183d
cardmhz = 368
tiger_rsakey = A92DA72FEEACF2947B003ED652153B189E4043B0138C368BDF6B9ED77DDAD6C0761A2198AEB3FC97A19C9D01CA769B3FFFE4F6E70FA4E0696A8980E18D8C58E11D817121346E3E66457FDD84CFA72589B25B538EFC304361B54845F39E9EFA52D805E5FD86B595B366C35716ABC91FA3DC159C9F4D8164B5
#
# **************** /COMMENT (OR REMOVE) IF HAVE ONLY ONE INTERNAL READER ******************
#
############################################ REMOTE SAMPLE ############################################
#
## remote1
[reader]
label = remote1 # LABEL
protocol = cccam # PROTOCOL
device = server,12000 # URL,PORT
account = user,pass # USER,PASSWORD
group = 1 # GROUP
cccversion = 2.0.11 # CCCAM VERSION
cccbuild = 2892 # CCCAM BUILD
disableserverfilter = 1
#
## remote2
#[reader]
#label = remote2 # LABEL
#protocol = newcamd # PROTOCOL
#key = 0102030405060708091011121314 # NEWCAMD PROTOCOL KEYS
#device = 192.168.1.4,11500 # URL,PORT
#account = 9000hd,9000hd # USER,PASSWORD
#group = 1 # GROUP
#fallback = 1
#
## remote3
#[reader]
#label = remote3 # LABEL
#protocol = newcamd # PROTOCOL
#key = 0102030405060708091011121314 # NEWCAMD PROTOCOL KEYS
#device = 192.168.1.4,11501 # URL,PORT
#account = 9000hd,9000hd # USER,PASSWORD
#group = 1 # GROUP
#fallback = 1
#
############################################ /REMOTE SAMPLE ############################################


[OSCAM.CONF]
[global]
Nice = -1
WaitForCards = 1
LogFile = stdout
saveinithistory = 1
#ClientTimeout = 5
#CacheDelay = 120
#Logfile = /var/log/oscam.log

[newcamd]
Key = 0102030405060708091011121314
Port = 11500@093b:000000;11501@183D:005411;11502@0919:000000

#[cccam]
#port = 12000
#version = 2.0.11
#build = 2892

[dvbapi]
enabled = 1
boxtype = ipbox-pmt

[monitor]
Port = 0

[webif]
httpport = 8189
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

[OSCAM.USER]
[account]
User = dummy
Pwd = dummy
Group = 1
Caid = 093b,183D,0919
Ident = 093b:000000;0919:000000;183D:005411
Au = 1
monlevel = 4
 
L

lucsch

Registered
Messages
75
If you start logging, you will see an error in the dvbapi module.
This comes, as far as i understand, from the new kernel. The dvbapi will not
work on the new releases. (not yet)
 
You must log in or register to reply here.
Top