Octagon SX88 series "secret menu's"

william-1

Feed Hunter
Messages
4,371
Octagon SX88,SX88+ & SX88+ Optima.

6363 = CAS
0000 = Biss & PowerVu
2020 = Web TV
1010 = Free TV
4761 = Back Up & Recovery
 

wind47

Registered
Messages
12
for the Octagon on to the Secret Menu

Menu - Settings: PIN 6363 --> CAS Setting (Bottom)

FTP login: root , PW: sky1122

Webif (Web Interface) browser: IPappareil:8888

Fast key Editor: TV Mode - Press 0000 Pin. (Biss, Power Vu)

Telnet (Puty): Login: root, Password: sky1122
 

william-1

Feed Hunter
Messages
4,371
DiSEqC USALS motor functions now corrected

DiSEqC motor now working after power Off/On :thum:

SX88-4K
1/Update software online via the receiver Ethernet connection {1.05.35} to the SX88-4K,
2/Save your channel list on a USB stick,
3/Factory Reset,
4/Re-load your channel list,
5/Reset your motor settings,

Previously after mains power supply was disconnected on power up the DiSEqC motor would not move,

Good upgrade for the SX88-4K just follow my instructions above :D
 
Last edited:

william-1

Feed Hunter
Messages
4,371
Sad to say this fix was short-lived when I powered the receiver back up this afternoon the motor did not move when selecting another satellite :eek:
So I selected DiSEqC 1.2 to drive the motor East & West then selected USALS & all motor functions work correctly now so if you leave it on standby you will not have a problem but if like me, you are changing receivers on a regular basis you will have this problem.
 

EnoSat

Senior Member
Messages
1,952
if not MOVE try in selected satellite option Motor settings and Goto - select Center/OK and after Position/OK , if move in option Save push OK
 

valparra

Registered
Messages
31
Hi l am trying to set up the BISS codes for BBC One HD on the satback 27.5w and can see the code in Key 00 and saved but its not clearing the channel. Not sure what key 01 is but it all zero and can't enter

Where am l going wrong
 

vmware

Registered
Messages
1
Trying to access CAM settings on SX87.
6363 doesn't seem to work.
Is SX87 firmware different method?
 
Top