Offtensive
Registered
- Messages
- 61
Hi,
Is there an advanced configuration menu for the LNB set up? I'm looking to install a motorised dish, and possibly add in a single dish for one satellite (as the motorised may have its view blocked).
A user from another forum gave me this info on how to set it up.
Receiver connects to Motor
Motor connects to Diseqc Switch
Diseqc Switch connects to motorised and fixed dish
and the below would be set up for each Satellite
Satellite
LNB------------------------------LNB 1
Priority-------------------------Auto
LOF------------------------------Universal LNB
Voltage mode---------------------Polarization
Increased voltage----------------no
Tone mode------------------------Band
DiSEqC mode----------------------1.2
Toneburst------------------------None
Committed DiSEqC command---------AA
Fast DiSEqC----------------------no
Sequence repeat------------------no
Command order--------------------committed,toneburst
Uncommitted Diseqc Command-----None
Diseqc Repeats-------------------None
Longitude------------------------
---------------------------------West
Latitude-------------------------
---------------------------------North
Use Usals for this sat-------------Yes
Fixed
Configuration Mode Advanced
Satellite--------7 west
LNB------------------------------LNB 2
Priority-------------------------Auto
LOF------------------------------Universal LNB
Voltage mode---------------------Polarization
Increased voltage----------------no
Tone mode------------------------Band
DiSEqC mode----------------------1.0
Toneburst------------------------None
Committed DiSEqC command---------AB
Fast DiSEqC----------------------no
Sequence repeat------------------no
Command order--------------------committed,toneburst
So this is from an enigma2 box, I was wondering if there is any way to do this on the Viark
Many thanks
Is there an advanced configuration menu for the LNB set up? I'm looking to install a motorised dish, and possibly add in a single dish for one satellite (as the motorised may have its view blocked).
A user from another forum gave me this info on how to set it up.
Receiver connects to Motor
Motor connects to Diseqc Switch
Diseqc Switch connects to motorised and fixed dish
and the below would be set up for each Satellite
Satellite
LNB------------------------------LNB 1
Priority-------------------------Auto
LOF------------------------------Universal LNB
Voltage mode---------------------Polarization
Increased voltage----------------no
Tone mode------------------------Band
DiSEqC mode----------------------1.2
Toneburst------------------------None
Committed DiSEqC command---------AA
Fast DiSEqC----------------------no
Sequence repeat------------------no
Command order--------------------committed,toneburst
Uncommitted Diseqc Command-----None
Diseqc Repeats-------------------None
Longitude------------------------
---------------------------------West
Latitude-------------------------
---------------------------------North
Use Usals for this sat-------------Yes
Fixed
Configuration Mode Advanced
Satellite--------7 west
LNB------------------------------LNB 2
Priority-------------------------Auto
LOF------------------------------Universal LNB
Voltage mode---------------------Polarization
Increased voltage----------------no
Tone mode------------------------Band
DiSEqC mode----------------------1.0
Toneburst------------------------None
Committed DiSEqC command---------AB
Fast DiSEqC----------------------no
Sequence repeat------------------no
Command order--------------------committed,toneburst
So this is from an enigma2 box, I was wondering if there is any way to do this on the Viark
Many thanks