- Messages
- 10,198
You can flash an image over the network (using FTP and Telnet).
04.05.2010
Coolstream Image Flash Assistant - Beta
Now that more people are interested in a tool with which you can easily flash an image of Pc from the Coolstream, I sometimes put on it and programmed the first Flash Wizard Coolstream.
With this you can flash any image desired by the network.
It is, however, for the time being a beta version and also completely upgradeable, but he first met his needs.
Therefore, their use at your own risk and errors in the first Version can not be excluded.
Coolstream Flash Image Wizard 1.0 Beta
________________________________________
The Flash Wizard is a tool for Coolstream HD-1.
He ermögtlicht flashing an image over the network (using FTP and Telnet).
Just the IP Coolstream, FTP username, FTP password and specify the image location.
Start by clicking on "flash" will start the flash process.
Warning: On an image change all the settings, such as Settings lost! Therefore, back up data before!
Windows based upon this, NET.Framework is needed.
Here is the code of the commands:
04.05.2010
Coolstream Image Flash Assistant - Beta
Now that more people are interested in a tool with which you can easily flash an image of Pc from the Coolstream, I sometimes put on it and programmed the first Flash Wizard Coolstream.
With this you can flash any image desired by the network.
It is, however, for the time being a beta version and also completely upgradeable, but he first met his needs.
Therefore, their use at your own risk and errors in the first Version can not be excluded.
Coolstream Flash Image Wizard 1.0 Beta
________________________________________
The Flash Wizard is a tool for Coolstream HD-1.
He ermögtlicht flashing an image over the network (using FTP and Telnet).
Just the IP Coolstream, FTP username, FTP password and specify the image location.
Start by clicking on "flash" will start the flash process.
Warning: On an image change all the settings, such as Settings lost! Therefore, back up data before!
Windows based upon this, NET.Framework is needed.
Here is the code of the commands:
- ftp 192.168.178.23
- root
- coolstream
- cd /tmp
- send C:\Daten\XY.img
- quit
- telnet 192.168.178.23
- cd /tmp
- eraseall /dev/mtd2
- cat XY.img > /dev/mtd2
- reboot