SRG/SSR Swiss Viaccess 4.0 (CaID 0500:40810)

piterfree

Registered
Messages
312
Guys i'll try to help you and ihope it'll work as it worked for me. I have a vu+zero with the image satdreamgr on it DO NOT Discuss Payservers Here! I had the same problem . So what you have to do is to go to the OSCAM.DVBAPI in your image. You will have a picture like this somewhere in it
# SRG SRR EMU (13.0E)
#
I: 0500:040810 ;
I: 0500:050800 ; both disabled - until EMU will work.
#
P: 0500:023800:0385:02CD ; SRF 1
P: 0500:023800:038B:02CD ; SRF Zwei
P: 0500:023800:038F ; SRF Info
P: 0500:023800:36B9:02CE ; RSI LA 2
P: 0500:023800:36B2:02CE ; RTS Un
P: 0500:023800:36B3:02CE ; RSI LA 1
P: 0500:023800:36B8:02CE ; RTS Deux
P: 0500:023800:03B7:02CD ; RSI LA 2 HD
P: 0500:023800:36E3:02CE ; RSI La 1 HD
P: 0500:023800:4331:02CF ; SRF 1 HD
P: 0500:023800:4332:02CF ; SRF Zwei HD
P: 0500:023800:4333:02CF ; RTS Un HD

You have to change I to P in the first two lines,make SAVE and RESTART YOUR IMAGE and i believe it will work as it worked to me.
DO NOT Discuss Payservers Here!.
I hope i helped you a lot



0500:040810 ..?

P: 0500:023800:0385:02CD ; SRF 1
P: 0500:023800:038B:02CD ; SRF Zwei
P: 0500:023800:038F ; SRF Info
P: 0500:023800:36B9:02CE ; RSI LA 2
P: 0500:023800:36B2:02CE ; RTS Un
P: 0500:023800:36B3:02CE ; RSI LA 1
P: 0500:023800:36B8:02CE ; RTS Deux
P: 0500:023800:03B7:02CD ; RSI LA 2 HD
P: 0500:023800:36E3:02CE ; RSI La 1 HD
P: 0500:023800:4331:02CF ; SRF 1 HD
P: 0500:023800:4332:02CF ; SRF Zwei HD
P: 0500:023800:4333:02CF ; RTS Un HD [/B]

P: 0500:023800 non exist:mad:

error...?:mad:
 

dahaka

Registered
Messages
700
Tested on my Starsat 2000 HD hyper v2.34 but not working , i have watched the you tube video but i only get Scramble Channel message :mecry:
using most recent patch 2.34 Swiss channels did not open :(
i think youtube video is Fake connecting to Server via WI-FI :mecry:

After reading some pages , you have to connect the server (non end server) for only one time until its open (the server store the keys at your receiver) then close your receiver and disconnect the internet open again its work without internet .
 

barney115

Donating Member
Staff member
Administrator
Messages
24,681
That is what i thought @ dahaka
pity the you tube video was so miss-leading
So in reality In order to be provided with the Working Keys it only comes with a Fee and subscription to commercial servers .
 

vip0755

Donating Member
Messages
295
Tested on my Starsat 2000 HD hyper v2.34 but not working , i have watched the you tube video but i only get Scramble Channel message :mecry:
using most recent patch 2.34 Swiss channels did not open :(
i think youtube video is Fake connecting to Server via WI-FI :mecry:


That's the same receiver as I've got with the exact same S/W v2.34 and those Swiss channels on Hotbird are deffo working on EMU for me(I disconected the LAN lead)if I were you I'd try deleting those channes from your channel list and rescan freq.10972(H) SR29700
 

ss24ever

Registered
Messages
35
SGR is working in emu (without internet of course ) in the STB Atlas 200 HD.

For linux stb Enigma 2 , you must use card like mahboula card , revenge 2 card ,gocard ,it's working witch thoise card and oscam


it's a viac*ess 4 encryptions , no more viac*acess 3.0 on those channels
 

Ben196

Registered
Messages
6
Interesting. Combing through a lot of related forums, you seem to be the only source for that info. Where do you get the keys? What kind of EMU?
I'd really appreciate more detailed background information.
 

piterfree

Registered
Messages
312
sto tentando con wicard
su Mutant 4k ed il log e'
questo, purtroppo senza video, mi pere che vada fatta una emu specifica.


01: 23: 01.326 DVB0 [DVBAPI3]: CA_descr CAID 0500, provider 050800, PID 025C, privdata: 1301201403050800
01: 23: 01.326 DVB0 [DVBAPI3]: 1 tipo descr: 09 lunghezza: 12
01: 23: 01.326 DVB0 [DVBAPI3]: CA_descr CAID 0500, provider 040810, PID 025B, dati privati: 1301201403040810
01:23 : 01.326 DVB0 [DVBAPI3]: 1 tipo descr: 09 lunghezza: 12
01: 23: 01.326 DVB0 [DVBAPI3]: CA_descr CAID 0500, provider 060200, PID 025D, dati privati: 1301201403060208
01: 23: 01.327 DVB0 [DVBAPI3]: trovato 0 emm pids in CAT
01: 23: 01.423 DVB0 [DVBAPI3]: ECM pid 2d8, demux_id 0, filter_no 0, exm_pid_no 0, tabella 8161, sid 36e3, chid 0000
01: 23: 01.423 DVB0 [DVBAPI3]: 81 70 27 00 90 03 04 08 18 E2 03 4D 36 01 EA 10
01: 23: 01.423 DVB0 [DVBAPI3]: 43 AB 43 CC 92 B4 B3 4C 93 1C 5A D7 4B 25 FA BB
01: 23: 01.423 DVB0 [DVBAPI3]: F0 08 F1 E1 24 D7 20 C7 96 61
01: 23: 01.423 DVB0 [DVBAPI3]: freq = 0, grado = 0
01: 23: 01.423 R1 [emu]: media tempo di decodifica 1 ms
01: 23: 01.423 R1 [emu]: ECM81 (0500: 040810 / 36E3.0) da DVB0 [DVBAPI3] inserito nella coda
01: 23: 01.424 R1 [emu]: ECM 0500: 040810 42 byte
01: 23: 01.424 R1 [emu]: 81 70 27 00 90 03 04 08 18 E2 03 4D 36 01 EA 10
01: 23: 01.424 R1 [emu]: 43 AB 43 CC 92 B4 B3 4C 93 1C 5A D7 4B 25 FA BB
01: 23: 01.424 R1 [emu]: F0 08 F1 E1 24 D7 20 C7 96 61
01: 23: 01.424 R1 [emu]: ident = 040818
01: 23: 01.424 R1 [emu]: ECM_ID 0000, swap_cws = 0
01: 23: 01.424 R1 [emu]: processDw-> inputdcw: 43 AB 43 CC 92 B4 B3 4C
01: 23: 01.424 R1 [emu]: Via3x_Core -> init indata: 92 B4 B3 4C 00 00 00 00
01: 23: 01.424 R1 [emu]: Via3x_Core-> finale indata: E8 BF 3E 45 0D 5E 14 95
01: 23: 01.424 R1 [emu]: Via3x_Fct1: E8 BF 3E 45 95 5E 14 0D
01: 23: 01.424 R1 [emu]: Via3x_Core-> init indata: D6 F5 57 C1 95 5E 14 0D
01: 23: 01.424 R1 [emu]: Via3x_Core-> finale indata: 1A D2 85 A3 8C F9 55 40
01: 23: 01.425 R1 [emu]: Via3x_Fct2: 1A D2 85 A3 40 55 8C F9
01: 23: 01.425 R1 [emu]: dcw-> Dopo miscelazione dati: D2 E1 3F B5 D6 F5 57 C1
01: 23: 01.425 R1 [emu]: dcw-> Dopo 3Des: CA C9 6F AF 52 9F 8E 4C
01: 23: 01.425 R1 [emu]: Via3x_Core-> init indata: 52 9F 8E 4C 40 55 8C F9
01: 23: 01.425 R1 [emu]: Via3x_Core-> finale indata: 9E B8 5C 2E 07 80 4E BD
01: 23: 01.425 R1 [emu]: Via3x_Fct2: 9E B8 5C 2E BD 4E 07 80
01: 23: 01.425 R1 [emu]: Via3x_Core-> init indata: 77 87 68 2F BD 4E 07 80
01: 23: 01.425 R1 [emu ]: Via3x_Core-> finale indata: 0D 8C E5 26 29 74 9A 1B
01: 23: 01.425 R1 [emu]: Via3x_Fct1: 0D 8C E5 26 1B 74 9A 29
01: 23: 01.425 R1 [emu]: processDw-> outputDW dopo la miscelazione dei dati: 49 EB 14 65 77 87 68 2F
01: 23: 01.425 R1 [emu]: processDw-> inputdcw: 93 1C 5A D7 4B 25 FA BB
01: 23: 01.425 R1 [emu]: Via3x_Core-> init indata : 4B 25 FA BB 00 00 00 00
01: 23: 01.425 R1 [emu]: Via3x_Core-> finale indata: 31 2E 77 B2 57 B4 12 3E
01: 23: 01.425 R1 [emu]: Via3x_Fct1: 31 2E 77 B2 3E B4 12 57
01: 23: 01.425 R1 [emu]: Via3x_Core-> init indata: AD A8 48 80 3E B4 12 57
01: 23: 01.425 R1 [emu]: Via3x_Core-> finale indata: 61 8F 9A E2 01 4E C4 78
01: 23: 01.425 R1 [emu]: Via3x_Fct2: 61 8F 9A E2 78 C4 01 4E
01: 23: 01.425 R1 [emu]: dcw- > Dopo il mixaggio dei dati: 33 E1 FB F5 AD A8 48 80
01: 23: 01.426 R1 [emu]: dcw-> Dopo 3Des: 15 FA 23 E9 79 70 AD 10
01: 23: 01.426 R1 [emu]: Via3x_Core-> init indata: 79 70 AD 10 78 C4 01 4E
01: 23: 01.426 R1 [emu]: Via3x_Core-> finale indata: B5 57 7F 72 8F C5 06 BA
01: 23: 01.426 R1 [emu]: Via3x_Fct2: B5 57 7F 72 BA 06 8F C5
01: 23: 01.426 R1 [emu]: Via3x_Core-> init indata: AF FC AC 2C BA 06 8F C5
01: 23: 01.426 R1 [emu]: Via3x_Core-> finale indata: D5 F7 21 25 64 47 3A 82
01: 23: 01.426 R1 [emu]: Via3x_Fct1: D5 F7 21 25 82 47 3A 64
01: 23: 01.426 R1 [emu]: processDw-> outputDW dopo il mixaggio dei dati: FB 37 97 74 AF FC AC 2C
01: 23: 01.426 R1 [emu]: Final DW dopo xor: CB A5 79 43 EB 7C 1A B0 B8 9C D4 B8 3D 48 1F 60
01: 23: 01.426 R1 [emu]: DCW CB A5 79 43 EB 7C 1A B0 B8 9C D4 B8 3D 48 1F 60
01: 23: 01.426 R1 [emu]: memorizzato nella cache non decodificato ECM81 (0500: 040810 / 36E3.0 ) per DVB0 [DVBAPI3] memorizzato
01: 23: 01.426 R1 [emu]: 5 ECM81 (0500: 040810 / 36E3.0) per DVB0 [DVBAPI3] non decodificato (2/3/3 ms)
01: 23: 01.426 DVB0 [ DVBAPI3]: ECM81 (0500: 040810 / 36E3.0) 'N / A' non decodificato da R1 [emu]
 

atari

Registered
Messages
24
is v4 dead? cant update in module v1.484 too
040810 0000000000000001 00000001 2018-11-08 2018-12-23
 
O

ooOO_SORGOS_OOoo

is v4 dead? cant update in module v1.484 too
040810 0000000000000001 00000001 2018-11-08 2018-12-23

Viaccess perfect update
Linux emulator/ cams
Scam
Wicardd

Modul
Viaccess ci+ and ci last modul
Secure modules



 

SatFan14

Registered
Messages
21
Unteste Oscam-Emu for armhf-cpu
Extrakted from "Qviart Lunix3 4K Openpli Emu SRG Hotbird 13 (8.8.18)" Image

hxxps://anonfile.com/EcMa95q2be/Qviart_Lunix3_4K_oscam-emu_rar
 
Top