Problems with satconfiguration Vantage HD8000S

videofreaknl

Registered
Messages
1
Hello Satfriends.
I have problems with Tuner1 setting (Antenna) of Vantage HD8000S with sat 23,5 (A-port1) 28,2 (B-port2) 19,2 (C-port3) 13 (D-port4). No problems with Xtrend 9000. LNB Power = on, LNBtype 1 (=Quattro LNB), DiSEqC Port (1 till 4), Tone 22kHz = auto, DiSEqC 1.1 = Off. System message = Searching for Signal. The Xtrend 9000 works perfect, but I can not configurate the Vantage HD8000S.
What am I do'ing wrong?
Please could help me somebody?
Thanks, a satfriend.:mecry:
 

nek999

Registered
Messages
7
tone 22khz off, diseqc on, then assign head to diseqc port, unless your lnb s & switch is very old
 
Top