How to scan multistreams on 9.0E

testuser1234 · Jan 12, 2020

I just founf out that some Italian multistreams are available on 9.0 East.

Here are the parameters:
12149 V DVB-S2/8PSK MPEG-2 Multistream PLS: Gold 262140 31400 2/3

I've a dvb-s2 card of TBS 8922 and run it with dvbdream.

Can someone help me to scan these multistreams as I could not find any. A snapshot would be very useful.

Many thanks!

barney115 · Jan 12, 2020

Your Questions were alerady answered Have a read => https://www.sat-universe.com/showpost.php?p=2037062769&postcount=33

the italian multistream service if you are outside italy they are using the italian spot beam on 9*

william-1 · Jan 12, 2020

This beam is extremely tight as the map below illustrates,
Outside of this beam even with a very large dish you will not get this beam,

This is the future of designer satellite footprints.

EnoSat · Jan 12, 2020

testuser1234 said:
I just founf out that some Italian multistreams are available on 9.0 East.
Can someone help me to scan these multistreams as I could not find any. A snapshot would be very useful.

run CS and check signal
https://sourceforge.net/p/crazyscan/wiki/Info/

testuser1234 · Jan 17, 2020

EnoSat said:
run CS and check signal
https://sourceforge.net/p/crazyscan/wiki/Info/

I'll try it tonight. Many thanks!

dydyer · Jan 18, 2020

Hi, tested with parabol 70 cm in france and 60% signal, work very well but into the receptor do not forget multistream infos and that's ok.....

How to scan multistreams on 9.0E

testuser1234

barney115

Donating Member

william-1

EnoSat

Senior Member

testuser1234

dydyer

Banned