#21
|
|||
|
|||
![]() unfortunaltely no way to receive t2-mi with DE 6.0 !
files and config are the same used with OpenAtv ! what else wrong or missing ? thx |
#22
|
||||
|
||||
![]() missing astra-sm in OE2.5, check in console running proccess
__________________
![]() |
#23
|
|||
|
|||
![]() As matt33 told me I only use files that are on dxtv.de
HOWTO_T2MI_OE2.5_Dreambox_by_HK2k2_070318 checking status from console astra-sm is running but on 12648 V appears on screen message "Timeout reading PAT". Channels can't be tuned! What else missing or wrong ? ![]() thanks |
#24
|
||||
|
||||
![]() check debug from astra-sm
__________________
![]() |
#25
|
|||
|
|||
![]() astra-sm status ok
but bitrate very low aproximately 0 how to solve it ? ![]() thx |
#26
|
|||
|
|||
![]() my signal on 12648V is 10,5-11,75 db
telnet log is: [email protected]:~# systemctl status astra-sm WARNING: terminal is not fully functional ● astra-sm.service Loaded: loaded (/etc/init.d/astra-sm; generated; vendor preset: enabled) Active: active (running) since Thu 1970-01-01 01:00:06 CET; 50 years 11 mont Docs: man:systemd-sysv-generator(8) Process: 269 ExecStart=/etc/init.d/astra-sm start (code=exited, status=0/SUCC CGroup: /system.slice/astra-sm.service └─272 /usr/bin/astra --pid /var/run/astra.pid /etc/astra/astra.c nf Dec 28 17:33:03 dm920 astra[272]: [12648PLP1 #1] Bitrate:0Kbit/s PES:0 CC:0 Dec 28 17:33:04 dm920 astra[272]: [12648PLP1 #1] Bitrate:0Kbit/s PES:0 CC:0 Dec 28 17:33:05 dm920 astra[272]: [12648PLP1 #1] Bitrate:0Kbit/s PES:0 CC:0 Dec 28 17:33:06 dm920 astra[272]: [12648PLP1 #1] Bitrate:0Kbit/s PES:0 CC:0 Dec 28 17:33:06 dm920 astra[272]: [12648PLP1] Failed to switch to reserve Dec 28 17:33:33 dm920 astra[272]: [12648PLP1 #1] Bitrate:0Kbit/s PES:0 CC:0 Dec 28 17:33:34 dm920 astra[272]: [12648PLP1 #1] Bitrate:0Kbit/s PES:0 CC:0 Dec 28 17:33:35 dm920 astra[272]: [12648PLP1 #1] Bitrate:0Kbit/s PES:0 CC:0 Dec 28 17:33:36 dm920 astra[272]: [12648PLP1 #1] Bitrate:0Kbit/s PES:0 CC:0 Dec 28 17:33:36 dm920 astra[272]: [12648PLP1] Failed to switch to reserve what else missing or wrong ? ![]() thanks |
![]() |
Thread Tools | |
Display Modes | |
|
|