Thanx to Dalen, my translation...
How to change a key via Remote...
1. Choose a channel to check if the key is OK
2. Get into the receiver's Gold Emu Menu (press 0 + Menu on your Remote)
3. Choose the Key Editor Menu
4. Choose a system of encryption (like Nagra for D+)
5. Choose the right IDENT (for D+ it's 4101)
6. When you choose the right one press on the OK button
7. In the window for putting the key in first
7a. we write the IDENT, then
7b. the INDEX and then
7c. the first 16 signs
8. Repeat all that and put in the next 16 signs
9. If it's all cool the picture should appear... colours!!!
10. Press on Exit button
An example of changing a key 00 for D+ (Nagra)
410100CE5823E424584566
410101F6152652E52BE556
Then the 01 key for D+ (Nagra)
410102CE5823E424584566
410103F6152652E52BE556
These keys are just an example and do not open anything!
My addition: D+ overall uses keys 00 and 01.
The 00 key in Samsung uses key places 00 and 01.
The 01 key in Samsung uses key places 02 and 03.
With the new EMU 4.3 we have the same procedure but with a minor change: we need to press EXIT for each key, once we're finished:
For instance:
410100xxxxxxxxxxxxxxxx -> EXIT
Here the EMU returns automatically to the beginning and puts the key in. Then we repeat the procedure...
410101xxxxxxxxxxxxxxxx -> press the EXIT button on your Remote again and voila!! The key is in!!!
Niiiiiiiiiiiiiiiiiceeee!!!
