Re: TNT Sat and channel "NT1" on Diablo at the moment

empb

empb

SU Team: It's All Good (Fausto v1.45/Newcamd/vplug
Staff member
Administrator
Messages
10,287
Re: TNT Sat and channel "NT1" on Diablo at the moment

TNT Sat: NT1

Use Ipnosys026 :thum: or Underworld209 (?) at the moment.

See here for more infos:

http://www.sat-universe.com/showthread.php?p=795256#post795256

I can not thank xXTomXx enough for bringing this to our attention and k98 for the infos he provided. (so make sure you thank there posts in the above linked thread :thum:)

But if you want to watch NT1 (at the moment) use earlier version of firmware Ipnosys026 confirmed. I think the equivelant Underworld version is Underworld209 anyone with WiFi confirm?
 
empb

empb

SU Team: It's All Good (Fausto v1.45/Newcamd/vplug
Staff member
Administrator
Messages
10,287
@Anyone / k98. Can you re-confirm NT1 is ok with UW214 and if not test UW209 just for NT1. (For Diablo v1 WiFi Users Only).

passete said:
Tested 216 and 214 NT1 Black Screen here !

And it stand a mystery if it open with ipno or uw, because all others emus are OUT, even reading an original card with others softcam's (except patched oscam version)
As we say in French "Chapeau" for ipno 026 and uw 214.
Click to expand...

EMPB said:
I'll try and find out k98's CAS and Config settings for UW214 see if it makes a difference.

I know with Ipnosys026 "NT1" opens fine here on my Diablo Light v2 Rev3.9 with all CAS Settings OFF except for Viaccess and Seca [ON] and the usual Config:

Language [ENGLISH]
Caids File [MAIN]
Auto PMT [OFF]
Emulators [ON]
N2 AU [OFF]
Emulators Priority [1:Cards = 2:EMU]
Fixed CW [ON]
SmartCard Mess. [Show Normal]

MAIN Caids:

2600: Biss
0D05: Cryptoworks (ORF Digital/Austria Sat 19.2°E)
0D00: Cryptoworks (Ariqva 4.8°E)
0D03: Cryptoworks (Ariqva 9°E)
1722: Betacrypt (KD "Digital Free" 23.5°E)
0604: Irdeto2 (Bulsatcom 39°E)
0622: Irdeto2 (Canal Digitaal NL 19.2°E)
1801: Nagravision2 (KD "Digital Free" 23.5°E,TV Globo 13°E)
0100: Mediaguard (RAI Fun/Gold Card 13°E etc)
0500: Viaccess (Mezzo/SSR-SRG Swiss 13°E,Sic Int 16°E,TNT 19.2°E)
090F: Videoguard (Viasat Fausto 4.8°E)
Click to expand...
 
M

monza42

Registered
Messages
694
Hi
NT1 12285 V 3/4 27500 Work´s here with my Wifi First Generation
and UW 208 in an Vantage 7100 without an Emu Firm
Settings are:
Caids : CAIDS
Auto Pmt : OFF
Emu : ON
Cas : ALL OFF
 
K

k98

VIP
Messages
241
Now its "upside down"
NT1 on UW 2.14 is down, but working on UW 2.09 now.
Can confirm, that is working too with 2.08 on Vantage 7100 with Jepssen Firmware.

But share still crashes on NT1, only on NT1:

read header from server failed: len 0
/ # [mg0] -> ECM to cccamd 192.168.1.2:12000 (0001DF14)
error sending ecm (315 - -1)
[mg0] cant send ecm to cccamd 192.168.1.2:12000 : -1
Click to expand...


But when I see in ECM-Log:

[mg0] pid 0x1688 failed to decode.
[mg0] No viaccess key(s) found for id 30B00 keynr 03

[mg0] pid 0x1888 failed to decode.
[mg0] No viaccess key(s) found for id 30B00 keynr 03
Click to expand...

[mg0] namespace 0 t-id 0 on-id 0
[mg0] descramble on 1, source 0
[mg0] service 4290 index 0 pmt pid 284 (5), pids: video 0x00A8, audio 0x0070 0x002B
[mg0] ECM: CaID: 0x1811 -> CaPID: 0x1828 ProvID: 000000
[mg0] ECM: CaID: 0x1811 -> CaPID: 0x1868 ProvID: 000000
[mg0] ECM: CaID: 0x1863 -> CaPID: 0x18C8 ProvID: 000000
[mg0] ECM: CaID: 0x0500 -> CaPID: 0x1728 ProvID: 032920
[mg0] ECM: CaID: 0x0500 -> CaPID: 0x1748 ProvID: 022610
[mg0] ECM: CaID: 0x0500 -> CaPID: 0x1688 ProvID: 032940
[mg0] ECM: CaID: 0x0500 -> CaPID: 0x1788 ProvID: 030B00
[mg0] ECM: CaID: 0x0500 -> CaPID: 0x17A7 ProvID: 032830
[mg0] ECM: CaID: 0x0500 -> CaPID: 0x17C7 ProvID: 042800
[mg0] ECM: CaID: 0x0500 -> CaPID: 0x18A8 ProvID: 043330
[mg0] ECM: CaID: 0x0500 -> CaPID: 0x1888 ProvID: 043300
[mg0] ECM: CaID: 0x0500 -> CaPID: 0x1789 ProvID: 030B00
[mg0] ECM: CaID: 0x0100 -> CaPID: 0x1828 ProvID: 003311
[mg0] ECM: CaID: 0x0100 -> CaPID: 0x1848 ProvID: 003317
[mg0] ECM: CaID: 0x0100 -> CaPID: 0x1868 ProvID: 003315
[mg0] ECM: CaID: 0x0100 -> CaPID: 0x1808 ProvID: 00A821
Click to expand...

then is pid 1688 reserved for id 032940, and pid 1888 is reserved for id 043300 :confused:

Or it looks like keychange ? Who knows.

Mystical NT1.
 
You must log in or register to reply here.
Top