MBox Emu
- Thread starter dragjusto
- Start date
- Status
B
boxgot
Hello.I made a tar.gz file,to install through blue panel and if it works good,if not sorry
Let me know,i will remove it.
Let me know,i will remove it.
Last edited:
B
boxgot
Thanks Tahir.Ihave a 500+ and i i couldn't test with this,but i have made another tar for 500+ and it worked.Any way i will remove it
- Messages
- 6,174
mbox.cfg has to be in the same folder as mbox executable.
So if you use it on dreambox it should be in var/bin
HI thanks for replay i found FAQ how to install it:thum:
Hi i tried bu it,s not works for me!!
this is a photo of telnet :
http://i34.tinypic.com/2h2i9uc.jpg
this is a photo of telnet :
http://i34.tinypic.com/2h2i9uc.jpg
- Messages
- 6,174
Maybe you didn't stop other emus before running it.
when i try my g*box works,how can i stop eum before run mbox?
- Messages
- 6,174
You switch to Common interface from the menu. Or telnet to the box and use killall command to stop whichever emu is running.
e.g. killall gbox
Hi.
I can get it working by using telnet, just tested on a 7020 with Gemini. But after running the ./mbox command the output from mbox shows in the telnet console, and the telnet session does not return to the command prompt. And when I quit telnet the mbox process is terminated.
How can I launch mbox and keep the process running after closing telnet?
Or is there a script that works for launching mbox from the cam menu?
regards
I can get it working by using telnet, just tested on a 7020 with Gemini. But after running the ./mbox command the output from mbox shows in the telnet console, and the telnet session does not return to the command prompt. And when I quit telnet the mbox process is terminated.
How can I launch mbox and keep the process running after closing telnet?
Or is there a script that works for launching mbox from the cam menu?
regards
- Status