need help on ses6 40.5w

maleka

Registered
Messages
69
i there any body kno what is going on with ses6 at 40.5w i have lost signal in a lot off channels some not show any % signal at all any help thanks.
 

Ratzvan

Feed Hunter
Messages
22,693
i there any body kno what is going on with ses6 at 40.5w i have lost signal in a lot off channels some not show any % signal at all any help thanks.

Sometimes it could happen, channels have problem, because they come from areas where bad wheater situation may affect broadcasting.
Could you be more clear?
What channels have you lost?
 

maleka

Registered
Messages
69
thank you for your help the channels i lost was ferquencys 3772r30000
3728L21300 3763r30000 3843L30000 4095r30000 amc fox film arts disney fox and gol tv any idea thanks.thank you
 

Ratzvan

Feed Hunter
Messages
22,693
thank you for your help the channels i lost was ferquencys 3772r30000
3728L21300 3763r30000 3843L30000 4095r30000 amc fox film arts disney fox and gol tv any idea thanks.thank you

Except 3772r30000, that's not even reported on lyngsat and where there is anyway no signal, all other frequences are ok.
But they are complex mux and you could need more signal to get them compared to other scpc channels present on that satellite.

I don't know your equipment. But if you have a single dish you could try a change with dielectric plate in a different position (both inside/less outside lnb than disposal (90°) and see if inverting polarity too you could get something of different.

K
 

amdade

Registered
Messages
76
Ive lost 4095R, used to be fine but now no sniff for me for some weeks.

I used to have issues with 3980L, but has improved for me (on the plus side)

I have my solid 2.4m parked on 40.5W for 3980L during the footy season
 

maleka

Registered
Messages
69
there is like less then a 100 off channels its getting week this sat but i heard its cause tower comunications like cell phone towers need a lnb from 2.7to4.2 ghz to avoid noise intreference from the towers
 

CBAND CATCHER

Registered
Messages
69
4090 R 300000 frequency on 40 west stopped working yesterday.PowerVu 3 is now difficult to be hacked unfortunately. We hope it will not stop for long.
 
Top