E2 HYPERION v5.3 Oscam help

valparra

Registered
Messages
31
Hi
I have installed a dgs image 1.5.1 and installed oscam and working ok
I have upgraded my STB to Enigma E2 with PKT HYPERION v5.3 Image which is install as a multiboot. I have then proceeded to install oscam useing the "sh4CAM Conditional+Access+Module+software build 1.12" which has installed and l can see the webif page however l am unable to clear the channel
As it was sh4 cam l copied the files across but the my test channel is not clearing


The files are as
# oscam.server

[reader]
label = smart
protocol = cccam
device = 85.17.207.124 , 40106
key = 0102030405060708091011121314
user = 6796835
password = 9845158
fallback = 1
caid = 0963
ident = 0000:000000
group = 1

# oscam.user
[account]
user = anonymous
pwd = anonymous
caid = 0963
au = 1
betatunnel = 1833.FFFF:1702
group = 1,2

#config
[oscam.conf]
[global]
disablelog = 1
logfile = /dev/tty
fallbacktimeout = 2000
nice = -1
maxlogsize = 0
lb_mode = 1
lb_save = 100
lb_nbest_readers = 3

[cache]

[dvbapi]
enabled = 1
pmt_mode = 4
request_mode = 1
user = local
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2
boxtype = duckbox (l have also used ipbox-pmt)
[webif]
httpport = 8888
httprefresh = 5
httpallowed = 192.168.11.1-192.168.11.255
aulow = 0
hideclient_to = 15


the status file is shown
2016/06/02 18:22:47 0 s services reloaded: 0 services freed, 39 services loaded, rejected 0
2016/06/02 18:22:47 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2016/06/02 18:22:47 0 s signal handling initialized (type=sysv)
2016/06/02 18:22:47 0 s 15 service-id's loaded in 2ms
2016/06/02 18:22:47 0 s can't open file "/var/keys/sh4cam.tiers" (err=2 No such file or directory), no tier-id's loaded
2016/06/02 18:22:47 0 s 2 provid's loaded
2016/06/02 18:22:47 0 s 5 lengths for caid guessing loaded
2016/06/02 18:22:47 0 s can't open whitelist file /var/keys/sh4cam.whitelist
2016/06/02 18:22:47 0 s can't open cacheex-matcher file /var/keys/sh4cam.cacheex
2016/06/02 18:22:47 0 s Starting listener 0
2016/06/02 18:22:47 0 s newcamd: disabled
2016/06/02 18:22:47 0 s Starting listener 0
2016/06/02 18:22:47 0 s csp: disabled
2016/06/02 18:22:47 0 s Starting listener 0
2016/06/02 18:22:47 0 s radegast: disabled
2016/06/02 18:22:47 0 s starting thread http
2016/06/02 18:22:47 0 s http thread started
2016/06/02 18:22:47 0 s starting thread reader check
2016/06/02 18:22:47 0 s reader check thread started
2016/06/02 18:22:47 0 s starting thread check
2016/06/02 18:22:47 0 s check thread started
2016/06/02 18:22:47 0 s creating thread for device 85.17.207.124
2016/06/02 18:22:47 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2016/06/02 18:22:47 0 s waiting for local card init
2016/06/02 18:22:47 522710 h HTTP Server listening on port 8888
2016/06/02 18:22:47 51C050 p 85.17.207.124: resolved ip=85.17.207.124
2016/06/02 18:22:47 51C050 p connecting to smart on 85.17.207.124:40106
2016/06/02 18:22:47 51C050 p socket open for cccam fd=6
2016/06/02 18:22:47 51C050 p connect succesfull cccam fd=6
2016/06/02 18:22:47 51C050 p proxy smart initialized (server=85.17.207.124:40106)
2016/06/02 18:22:47 0 s init for all local cards done
2016/06/02 18:22:47 0 s anti cascading disabled
2016/06/02 18:22:48 52BC68 c plain dvbapi-client granted (anonymous, au=off)
2016/06/02 18:22:48 52BC68 c dvbapi: 4 entries read from sh4cam.dvbapi
2016/06/02 18:22:52 52BC68 c dvbapi: [ADD PID 0] CAID: 0960 ECM_PID: 0506 PROVID: 000000
2016/06/02 18:22:52 52BC68 c dvbapi: [ADD PID 1] CAID: 0961 ECM_PID: 0506 PROVID: 000000
2016/06/02 18:22:52 52BC68 c dvbapi: [ADD PID 2] CAID: 0963 ECM_PID: 0506 PROVID: 000000
2016/06/02 18:22:52 52BC68 c dvbapi: new program number: 183F (Disc.History) [pmt_list_management 3]
2016/06/02 18:22:52 52BC68 c starting thread housekee


and l have seen

2016/06/02 18:37:javascript:void(0)44 299004F8 c anonymous (0963&000000/0000/183F/63:B7AA): found (213 ms) by smart
2016/06/02 18:37:52 299004F8 c anonymous (0963&000000/0000/183F/63:C501): found (215 ms) by smart
2016/06/02 18:38:00 299004F8 c anonymous (0963&000000/0000/183F/63:23F9): found (206 ms) by smart
2016/06/02 18:38:08 299004F8 c anonymous (0963&000000/0000/183F/63:25BE): found (206 ms) by smart
2016/06/02 18:38:16 299004F8 c anonymous (0963&000000/0000/183F/63:549A): found (203 ms) by smart
2016/06/02 18:38:24 299004F8 c anonymous (0963&000000/0000/183F/63:356C): found (206 ms) by smart
2016/06/02 18:38:32 299004F8 c anonymous (0963&000000/0000/183F/63:EC00): found (205 ms) by smart
2016/06/02 18:38:40 299004F8 c anonymous (0963&000000/0000/183F/63:BC01): found (212 ms) by smart
2016/06/02 18:38:48 29900

anyone help as to the problem for not clearing would be appreciated
 

badeyeah

Registered
Messages
92
I'm not an expert, but I see you don't have any loadbalancing in your oscam.server file.

Also I can see au=0, try au=1

If you change boxtype don't forget a full reboot. Try another boxtype
like ufs9XXX.

What I recall from my own box is, I always installed the original latest clean firmware. After installing E2 on usb, I moslty use the HDMU-image. (with different oscam then yours ofc)
 

valparra

Registered
Messages
31
Hi
Many thanks for your input which i will try when l get home
I have no prefference l am just trying to get my old box up and running with E2 image. l was directed to the image as it was stable not experienced on E2 but trying to learn.
 

triplex1

Registered
Messages
288
If you working with PKT HYPERION v5.3 Image go to download plugins emu and download oscam-ymodv18-t53-sh4
 
Top