vu+ solo pro with red light on

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,480
Hey guys
Thank you very good training and good guidance.
My question is how to get the files you want to JTAG?
I think the question you asked me a lot of users to be teachers.

Depends on the box type and the nand flash type.

Bootloader are available its the flash file needed for bb3 that is not always available but bb3 includes a detailed how to on how to make the flash file from a nand flash chips spec.
 

mamad_hv

Registered
Messages
58
Depends on the box type and the nand flash type.

Bootloader are available its the flash file needed for bb3 that is not always available but bb3 includes a detailed how to on how to make the flash file from a nand flash chips spec.
Hello teacher
I need files Solo and Solo 2
 

suttsy

Registered
Messages
9
Hi guys, just curious to find out has anyone actually managed to bring this box back to life again.
If so, could you please let me know how.
Thanks in advance!

Suttsy....
 

DCDi

Registered
Messages
5
Hello, I have a problem connecting with BBS.
No matter what i do not connected.
All the wires are soldered correctly.
Jumper OFF. One jumper version of the board.
After i connect the receiver. BBS movesthe port from USB2 to LPT1.
Sometimes stays on COM2 but still will not connect.
The CPU gets very hot so iknow it is bricked.
It was working fine then one day wont boot.
So probably timebomb.
Any ideas?
 

DCDi

Registered
Messages
5
Hello, I have a problem connecting with BBS.
No matter what i do not connected.
All the wires are soldered correctly.
Jumper OFF. One jumper version of the board.
After i connect the receiver. BBS movesthe port from USB2 to LPT1.
Sometimes stays on COM2 but still will not connect.
The CPU gets very hot so iknow it is bricked.
It was working fine then one day wont boot.
So probably timebomb.
Any ideas?

Now is fixed on USB1 but still won't connect.
Is the CPU dead??
 
Top