Deltacam / Emu Firmware Cobra / Loader / and Other Files

Rickk

Registered
Messages
2,375
DeltaCam Emu Firmware Cobra 1.03

================================
Change Log for Cobra firmware
================================

----------------
Special stuff:
----------------
- CSat smartcard SECA 3 pairing on HD channels (nano 01)
- Mediaset nagra tiger new smartcard reading support
- Skylink Irdeto 0624
- UPC emulator

v01.03:
------------
- fixed the problem on radio channels not being descrambled
- find and fixed a bug on EMM handling

v01.02:
------------
- improved channel switching speed
- fixed support for Skylink, CSlink, UPC Ice smartcards (no need to set anything)
- added support for Skylink Irdeto2 smartcards (no need to set anything)
- improvements for seca Dutch smartcards
- fixed a bug in nagra entitlements menu
- fixed a bug on saving force irdeto/nagra settings (it caused some errors for beta/nagra smartcards, like the sky-De S02 smartcard)
- now the changing of the force irdeto (or force nagra) setting will lead to a smartcard reset (so it will start in the choosen way without the needs to remove and insert it again)
- fixed a little mistake for betacrypt smartcards' filter on EMM-UA
- added dynamic management of smartcard/emu selection (if one stops to work and the other can work in replacement of that, it will be selected)
- fixed a bug on cryptoworks emulator (ORF and UPC channels)
- fixed a bug on Viaccess smartcards activation

v01.01:
------------
- first public release
 
Last edited:

Rickk

Registered
Messages
2,375
DeltaCam Loader 1.30 for the OS Windows

This Loader is only for the new DeltaCam.

DeltaCam Loader 1.30 für das Betriebssystem Windows.
Dieser Loader ist nur für den Gebrauch mit dem neuen DeltaCam.

==================================
Change Log for DeltaFlashLoader
==================================

v01.30
------------
- fixed a bug on flashing softcam.key files with MAC OSX and Linux versions
- improved the softcam.key compatibility

v01.26
------------
- first public version
 

Rickk

Registered
Messages
2,375
DeltaCam Loader 1.30 for Linux in two versions, one as GUI and one as CLI version.

This Loader is only for the new DeltaCam.


DeltaCam Loader 1.30 für Linux in zwei Versionen, eine als GUI und eine als CLI Version.

Dieser Loader ist nur für den Gebrauch mit dem neuen DeltaCam.

==================================
Change Log for DeltaFlashLoader
==================================

v01.30
------------
- fixed a bug on flashing softcam.key files with MAC OSX and Linux versions
- improved the softcam.key compatibility

v01.26
------------
- first public version
 

Rickk

Registered
Messages
2,375
DeltaCam Loader 1.30 for Mac OSX.

This Loader is only for the new DeltaCam.

DeltaCam Loader 1.30 für das Betriebssystem Mac OSX.

Dieser Loader ist nur für den Gebrauch mit dem neuen DeltaCam.

==================================
Change Log for DeltaFlashLoader
==================================

v01.30
------------
- fixed a bug on flashing softcam.key files with MAC OSX and Linux versions
- improved the softcam.key compatibility

v01.26
------------
- first public version
 

Rickk

Registered
Messages
2,375
Here is the DeltaCam Key Editor 1.05. This software is only for use under Windows.

With this key editor you can make your own key.bin file, which is only for use on the DeltaCam.

For using keys on the DeltaCam, you will need to be flash cobra firmware on it. The Python firmware will not support any kind of keys.


Hier ist der DeltaCam Key Editor. Diese Software ist für den Gebrauch unter Windows.

Mit diesem Key-Edtitor ist es möglich seine eigene key.bin Datei anzufertigen, welche nur für den Gebrauch auf dem DeltaCam gedacht ist.

Damit Keys auf dem DeltaCam genutzt werden können, ist es notwendig die Firmware cobra auf dem DeltaCam zu flashen. Die Firmware Python unterstützt keine Keys.
 

Rickk

Registered
Messages
2,375
Here is the DeltaCam factory firmware Deltacrypt 1.00

This Firmware is only for use in the new DeltaCam.

Hier ist die DeltaCam Auslieferungsfirmware Deltacrypt 1.00

Diese Firmware ist nur zum Gebrauch im neuen DeltaCam.
 

Rickk

Registered
Messages
2,375
Latest DeltaCamKeys Upd@te 30.06.2013
for Test
- Cablecom Swiss Cable [Nagra2]
- Bulsatcom (39°E)
- ORF (19.2°E)[Crypto]
- AustriaSat (19.2°E)[Crypto]
- TV Globo (13°E)[Nagra2]
- Skylink / Towercom (23.5°E)[Crypto]

only for Cobra
 
Last edited:

eniz9

Registered
Messages
3,376
**Only For Test**
*Bulsat/Polaris (39.0°E) New Keys Fix
*RAI (0030- 13.0°E) Next Keys Fix
*TV Globo International (13.0°E)
*ORF & Austria Sat(19.2°E)
*Sky Link (23.5°E)
*Hustler (19.2°E)
*Biss FULL *All Full Keys Updated
 
Last edited:

Rickk

Registered
Messages
2,375
Latest DeltaCamKeys Upd@te 02.07.2013

- Bulsatcom (39°E)
- Rai (13°E)

- Cablecom Swiss Cable [Nagra2]
- ORF (19.2°E)[Crypto]
- AustriaSat (19.2°E)[Crypto]
- TV Globo (13°E)[Nagra2]
- Skylink / Towercom (23.5°E)[Crypto]
 

Serjoga

Latvian satfat
Staff member
Moderator
Messages
6,069
Change Log for Cobra firmware
================================

----------------
Special stuff:
----------------
- CSat smartcards SECA 3 pairing on HD channels (nano 01)
- Mediaset nagra tiger new smartcards reading support
- Skylink Irdeto 0624
- TNT sat smartcards reading support
- Fransat smartcards reading support
- UPC emulator Cryptoworks
- TNT sat emulator Viaccess 3

v01.10:
------------
- improved smartcards communication for comptaibility issues
- improved compatibility with few STBs and TVs (fixed also Humax iCord HD compatibility reported by users)

NOTE: from Humax iCord's firmware 1.00.38 (CORTEX 1.00.38 and 1.00.39 too) you need to use a caid list without CAID 1830 (HD+ HD01 smartcards) or you can use firmware 1.00.19 that hasn't the CAID problem! Humax's last firmware has a bug that will not allow you to run multicas CAM's with CAID 1830.

- better audio language descriptors (in debug info)
- improved channel switching (especially for STBs with scrambling messages)
- improved MTD for up to 4 channels with *** (the only system that had problems on this because of the smartcards speed, German Sky v13 smartcard seems still being too slow for a good MTD)
- fixed a bug on monthly updates for some viaccess smartcards
- fixed TNTsat smartcards reading
- added Fransat smartcards reading

- from now on the emulator will be active by default (you can disable it in the settings menu)
- fixed a bug on BISS emulator (just remember to not use more than one provider with same SID+Ecm values in the softcam.key file)
- fixed a bug on decrypting Nagravision2 ECMs with emulator
- fixed a bug on all emulator's codifies when no keys or wrong keys were found
- fixed TNTsat emulator viaccess 3
 

Serjoga

Latvian satfat
Staff member
Moderator
Messages
6,069
DeltaCam Delta Flash Loader 1.31

==================================
Change Log for DeltaFlashLoader
==================================

v01.31
------------
- fixed a memory leak bug
- when you flash "emu keys" the file wasn't reset if you didn't restart the software, now it's fixed
 

eniz9

Registered
Messages
3,376
*Changelog:
*[HOT] FastMode (Ins7e11) for N*S SmartCards
*Descrambling Control’ option added
*N*S EMM bug fixed which could lead to a SmartCard crash (e.g. Sky V14)
*Fixed Funcard with certain files

Deltacam cobra v0112
 

bozomustafa_68

Registered
Messages
16,935
DeltaCam Firmware Cobra 1.20

Changes since version 1.12:
now fixed the whole Panasonic 2013 line of TV sets (also those with 2 CI slots like the Panasonic TX-P50VTW60)
fixed GigaBlue Quad
fixed Philips TVs (PFL series)
some general compatibility enhancements
improved compatibility with several DVB-C headends (Kopfstationen)
Sky V14 EMM fixed (CAIDs with recurring ECM/EMM PID have not been taken into account)
some other fixes, code improvements and enhancements (also resulting in a faster channel switching speed)
 

bozomustafa_68

Registered
Messages
16,935
DeltaCam Firmware Cobra 1.21

Changes since version 1.20:

[HOT!] Digiturk CryptoWorks Emulator (0D00) (EUTELSAT 7A 7.0°E)
moved public UPC Direct key to deltacam.key
improved compatibility with certain softcam.key formats (for bulsatcom and CryptoWorks providers)
fixed Xtra TV EMM processing (Conax)
 

powercisco

Super VIP
Messages
9,100
Deltacam Cobra 1.30

Changelogs:

- Optimized ECM pipeline
- Faster channel switching, especially in MTD
- Some further profound *** VideoGuard algo optimizations, results in better *** MTD performance, reducing the probability of latency glitches when descrambling multiple channels in parallel
- Some more code optimizations for better stability, compatibility and speed
e.g. reduces probability of a conflict state with the KNC ONE TV-Station/CineView which does not respect the CI communication rules
- CAID is now print in ECM Data/EMM Data menus
 

kargo.25

Super VIP
Messages
9,725
TNTSAT returns with Python/Cobra 1.31!

SURPRISE! TNTSAT returns with Python/Cobra 1.31!
Python 1.31

Changes since version 1.30:


Support for TNTSAT ViACCESS SmartCards with new Nano D215 (only SD channels for now)


Cobra 1.31

Changes since version 1.30:


Includes all changes from Python 1.31
TNTSAT ViACCESS Emu for SD channels with new Nano D215 (new OP key required, see below)
[EXCLUSIVE] Telenet (Belgium) Emu
 
Last edited:

kargo.25

Super VIP
Messages
9,725
Cobra 1.50

- [NEW] Support for Sky S01 SmartCard added (BetaCrypt 1702)
- [NEW] Support for TeleColumbus *** VideoGuard (09AF) SmartCard added (SD channels only)
- Applied Box ID for *** VideoGuard SmartCards is now displayed in CAM menu (SmartCard/SIM Card Info > *** CAS Menu)
- Stricter CAM menu rules
- Dynamic CAID Management
 

MAnitu

Registered
Messages
12
Python/Cobra 1.52! SRG SSR Emu finally coming to DeltaCam! (for Cobra only) - SRG SSR (13.0°E) key added
deltacam.key 2014-03-24 (for Cobra only)

Most important included keys:

ORF Digital (19.2°E)
AustriaSat / MTV (19.2°E)
TNTSAT (19.2°E)
SRG SSR (13.0°E)
Digitürk (7.0°E)
Skylink (23.5°E)
Cablecom Swiss (thanks toshi)

Download
 
Top