Sat-Universe Feeds Plugin(BissFeedAutoKey )

vip next · Oct 18, 2019

thanks

SM-G950F cihazımdan Tapatalk kullanılarak gönderildi

momi133 · Oct 18, 2019

Image OpenATV 6.3

SatEze said:
Information pasted on the site you indicated above. Image OpenATV 6.3

After paste the log and submit, Please send link like this:
_https://paste.fedoraproject.org/paste/EE9OZUu~c5tf2iIyD3kHig

SatEze · Oct 18, 2019

momi133 said:
After paste the log and submit, Please send link like this:
_https://paste.fedoraproject.org/paste/EE9OZUu~c5tf2iIyD3kHig

Sorry for the confusion. See the link below. I hope i did it right.

_https://paste.fedoraproject.org/paste/new?fork=rzbSMZyqwTqZNls0RxmSbQ_

AVFC_Dan · Oct 18, 2019

For me the plugin crashed when trying to open on a non-feed but soon as I scanned the feed it run fine. Not a problem as should never be running anyway on non feed.

Keep up the great work!!

momi133 · Oct 18, 2019

BissFeedAutoKey setting

SatEze said:
Sorry for the confusion. See the link below. I hope i did it right.

_https://paste.fedoraproject.org/paste/new?fork=rzbSMZyqwTqZNls0RxmSbQ_

Please send screenshot from BissFeedAutoKey setting(press blue key)

SatEze · Oct 18, 2019

momi133 said:
Please send screenshot from BissFeedAutoKey setting(press blue key)

1) I launch BissFeedAutoKey:

2) Choose Path and press the save button:

3) I get a Blues Screen error and this below:

momi133 · Oct 18, 2019

SatEze said:
1)
2) Choose Path and press the save button:

ohhh! my god! Do you read the Red sentence? Please set ip:127.0.0.1 or local ip add as webif setting in config file.

"Please set IPORT to webif setting in emulator config file(like oscam.conf)"

oscam.conf:
_https://paste.fedoraproject.org/paste/mU39m829J2dSyA71Utitkg

Code:

[webif] httpport = 8888 httpshowmeminfo = 1 httpshowuserinfo = 1 httpshowcacheexinfo = 1 httpshowecminfo = 1 httpshowloadinfo = 1 httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255

Adriatic22 · Oct 18, 2019

Due to the lack of space in flash,is it enough to copy
BissFeed Autokey folder to usb or is required to install again
.ipk file.

Thank you.

momi133 · Oct 18, 2019

Adriatic22 said:
Due to the lack of space in flash,is it enough to copy
BissFeed Autokey folder to usb or is required to install again
.ipk file.

Thank you.

ok, it's enough copy new version folder to extension folder.

marrakr · Oct 18, 2019

@momi133 I can't get any cw after update to 2.0 :/ but no crashes

NO COMMENT INFO

CW: Internet Conection
host port set to 127.0.0.1 8888
I have webif user/pass set but earlier worked that so I doubt it's issue.
Any tips?

SatEze · Oct 18, 2019

momi133 said:
ohhh! my god! Do you read the Red sentence? Please set ip:127.0.0.1 or local ip add as webif setting in config file.

"Please set IPORT to webif setting in emulator config file(like oscam.conf)"

oscam.conf:
_https://paste.fedoraproject.org/paste/mU39m829J2dSyA71Utitkg

Code:

[webif] httpport = 8888 httpshowmeminfo = 1 httpshowuserinfo = 1 httpshowcacheexinfo = 1 httpshowecminfo = 1 httpshowloadinfo = 1 httpallowed = [B][COLOR="Blue"]127.0.0.1,[/COLOR][/B]10.1.0.0-10.1.255.255

Thanks for your reply, but I already have 127.0.0.1 listed on my oscam.conf. Could it be that the port is somehow blocked?

marrakr · Oct 18, 2019

You have empty ip in plugin settings I guess looking on screenshots.
Correct it and write if it helps.

SatEze · Oct 19, 2019

SatEze said:
Thanks for your reply, but I already have 127.0.0.1 listed on my oscam.conf. Could it be that the port is somehow blocked?

Some good news: Using the same oscam.conf privileges as on OpenATV 6.3, I'm not getting any crash errors using OpenVIX 5.3 006(release, but so far it hasn't found any keys yet. Does this populate instantly or does it have to sit there for a few minutes as I have sat on a feed for about 10 minutes without it finding any keys?

SatEze · Oct 19, 2019

SatEze said:
Some good news: Using the same oscam.conf privileges as on OpenATV 6.3, I'm not getting any crash errors using OpenVIX 5.3 006(release, but so far it hasn't found any keys yet. Does this populate instantly or does it have to sit there for a few minutes as I have sat on a feed for about 10 minutes without it finding any keys?

momi133 · Oct 19, 2019

AVFC_Dan said:
For me the plugin crashed when trying to open on a non-feed but soon as I scanned the feed it run fine. Not a problem as should never be running anyway on non feed.
Keep up the great work!!

Please send crash log on non-feed freq! which freq?

marrakr said:
@momi133 I can't get any cw after update to 2.0 :/ but no crashes
NO COMMENT INFO
CW: Internet Conection
host port set to 127.0.0.1 8888
I have webif user/pass set but earlier worked that so I doubt it's issue.
Any tips?

Your problem is Internet Conection error! please check Internet Conection of box.

SatEze said:
Some good news: Using the same oscam.conf privileges as on OpenATV 6.3, I'm not getting any crash errors using OpenVIX 5.3 006(release, but so far it hasn't found any keys yet. Does this populate instantly or does it have to sit there for a few minutes as I have sat on a feed for about 10 minutes without it finding any keys?

momi133 said:
All feeds that is reported in Sat Universe ! and a few number of tv channels like ESPN Caribbean(30w )and BBC(27W)

when plugin doesn't get #cw, please report feed freq or sat-uni post in this topic!

thanks a lot

marrakr · Oct 19, 2019

momi133 said:
Your problem is Internet Conection error! please check Internet Conection of box.

Thanks but internet connection is good, if I reinstall V1.5 it's working.
I checked also:

Code:

root@dm520:~# ping linuxsat-support.com
PING linuxsat-support.com (104.31.71.118): 56 data bytes
64 bytes from 104.31.71.118: seq=0 ttl=55 time=54.033 ms
64 bytes from 104.31.71.118: seq=1 ttl=55 time=53.834 ms
64 bytes from 104.31.71.118: seq=2 ttl=55 time=53.489 ms

I can check port via telnet but don't know which one.

ilmago_ · Oct 19, 2019

marrakr said:
Thanks but internet connection is good, if I reinstall V1.5 it's working.
I checked also:

Code:

root@dm520:~# ping linuxsat-support.com PING linuxsat-support.com (104.31.71.118): 56 data bytes 64 bytes from 104.31.71.118: seq=0 ttl=55 time=54.033 ms 64 bytes from 104.31.71.118: seq=1 ttl=55 time=53.834 ms 64 bytes from 104.31.71.118: seq=2 ttl=55 time=53.489 ms

I can check port via telnet but don't know which one.

Same as me with Dm900. No problem at all with old 1.5 version

momi133 · Oct 19, 2019

marrakr said:
Thanks but internet connection is good, if I reinstall V1.5 it's working.
I checked also:

Code:

root@dm520:~# ping linuxsat-support.com PING linuxsat-support.com (104.31.71.118): 56 data bytes 64 bytes from 104.31.71.118: seq=0 ttl=55 time=54.033 ms 64 bytes from 104.31.71.118: seq=1 ttl=55 time=53.834 ms 64 bytes from 104.31.71.118: seq=2 ttl=55 time=53.489 ms

I can check port via telnet but don't know which one.

ilmago_ said:
Same as me with Dm900. No problem at all with old 1.5 version

Please check again with VPN and without VPN!

Adriatic22 · Oct 19, 2019

momi133 said:
ok, it's enough copy new version folder to extension folder.

I installed the plugin on this way,and I also tried manually insert key to Addkey plugin,and all works without problems.

Thanks for great plugin.

SatEze · Oct 19, 2019

momi133 said:
when plugin doesn't get #cw, please report feed freq or sat-uni post in this topic!

thanks a lot

55.5W
fly_1
3713 H 6000
(No Channel Name)
4068 V 7500

Sat-Universe Feeds Plugin(BissFeedAutoKey )

vip next

Registered

momi133

Senior Member

SatEze

AVFC_Dan

momi133

Senior Member

SatEze

momi133

Senior Member

Adriatic22

Registered

momi133

Senior Member

marrakr

Registered

SatEze

marrakr

Registered

SatEze

SatEze

momi133

Senior Member

marrakr

Registered

ilmago_

Registered

momi133

Senior Member

Adriatic22

Registered

SatEze