HowTo: Configure oscam-svn11279-webif-ssl-oscam-emu-patched

HowTo: Configure oscam-svn11279-webif-ssl-oscam-emu-patched

No clue how to configure this oscam version.

all oscam "config" files in /etc/tuxbox/config/

#####################
#### oscam.conf #####
#####################

[global]
disablelog = 1
logfile = /tmp/oscam.log
logduplicatelines = 1
clienttimeout = 9000
unlockparental = 1
nice = -1
maxlogsize = 1024
dropdups = 1
block_same_ip = 0
emmlogdir = /etc/tuxbox/config
lb_mode = 1
lb_save = 500
lb_min_ecmcount = 3
lb_savepath = /tmp/.oscam/oscam.stat
ecmfmt = c:s #l
failbantime = 15
failbancount = 3
suppresscmd08 = 1

[cache]

[cccam]
port = 15000
nodeid = XXXXXXXXXXXXXXXX
version = 2.3.0
reshare = 1
reshare_mode = 0
ignorereshare = 1
forward_origin_card = 1
stealth = 1
updateinterval = 60

[dvbapi]
enabled = 1
au = 1
delayer = 60
user = testuser
read_sdt = 2
write_sdt_prov = 1
boxtype = dreambox

[webif]
httpport = 12000
httpuser = test
httppwd = test
httphelplang = en
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255,10.0.0.1-10.255.255.255
httposcamlabel = OSCAM
## everything works fine

######################
#### oscam.server ####
######################

[reader]
label = HD02
protocol = internal
device = /dev/sci0
autospeed = 0
caid = 1843
boxkey = xxxxxxx #known but veiled
rsakey = xxxxxxx #known but veiled
fix07 = 0
ecmwhitelist = 89
detect = cd
nagra_read = 2
mhz = 369
cardmhz = 369
ident = 1843:000000
group = 1
emmcache = 1,3,15,0
auprovid = 003411
## Card works without any problems


[reader]
label = OSCamEMU
protocol = emu
device = emulator
caid = 0500,0D00,0D03,0D05,090F,0E00,
detect = cd
ident = 0500:023800
group = 2
emmcache = 1,1,2,0
audisabled = 1
#1a Does this mean that the oscam-emulator doesn't need a configuration? #1b Does it find SoftCam.Key by itself? #1c In which folder should it be?
#2 If there is "device = emulator" where does the SoftCam.Key has to be?
#3 Can I change this or is this default?
#4 How to add Tandberg into "caid =" or isn't it needed ?
#5 What happens when i let caid free?


[reader]
label = Biss and CCW
protocol = constcw
device = /usr/keys/constant.cw
caid = 2600
ecmwhitelist =
group = 3
#6 Biss and CCW should read keys from constant.cw. #6a Is this config correct? #6b How to put CCW in "caid" like "2600"?


######################
#### oscam.dvbapi ####
######################

A: ::0007:008C 2600:0000:1FFF #RTRS
#7 Is this correct?


####################
#### oscam.user ####
####################

[account]
user = testuser
uniq = 3
keepalive = 1
au = 1
group = 1,2,3
cccmaxhops = 2
cccreshare = 2
cccignorereshare = 1
#8 Can I put all three readers from above in one group or is it better for the performance for each one to be in his own group?




SoftCam.Key in /usr/keys:
P 0001 00 xxxx .. xx ;AFN Sports,9.0E, 11804
P 0001 01 xxxx .. xx ;AFN Sports,9.0E, 11804
#8 Not sure if key is up-to-date (11-04-2016 from SU forum) but doesn't clear picture
P 0090 00 xxxx .. xx ;BCC TV 1, 9.0E, 11823
P 0090 01 xxxx .. xx ;BCC TV 1, 9.0E, 11823
P 00A0 00 xxxx .. xx ;BCC TV 2, 9.0E, 11823
P 00A0 01 xxxx .. xx ;BCC TV 2, 9.0E, 11823
P 00B0 00 xxxx .. xx ;BCC TV 1 and 2, 9.0E, 11823
P 00B0 01 xxxx .. xx ;BCC TV 1 and 2, 9.0E, 11823
#9 Keys is correct but no clearing picture


constant.cw in /usr/keys:
2600:000000:0007:008C:1FFF:008D:xx xx .. xx;RTRS - TeamSat (16°E)
#10 Keys is correct. I tested it during sports transmission when it was encoded, but no clearing picture.

2600:000000:002D:0415:1FFF:07FD:xx xx .. xx;Monitor Games (9.0°E)
2600:000000:0272:125a:1FFF:11f9:xx xx .. xx;EFB1 (9.0°E)
#11 Keys are correct but no clearing picture.

06AD:000000:3EE6:01C4:1966::xx xx .. xx ;Fightbox HD (42.0°E)
06AD:000000:3EEA:01C8:196A::xx xx .. xx ;DaVinci Learning (42.0°E)
#12a Both CCW not yet tested, but is this format correct? #12b Must there be two ":" before keys?


Feel free to find the mistakes. Any help is appreciated

Ok, I have found the right configuration:


[reader]
label = OSCam_EMU
protocol = emu
device = emulator
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000;0604:000000;2600:000000;FFFF:000000;0E00:000000;1010:000000
group = 1
blockemm-g = 1

[reader]
label = SoftCam.Key
protocol = constcw
device = /etc/tuxbox/config/SoftCam.Key
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000;1010:000000
group = 2

[reader]
label = constant.cw
protocol = constcw
device = /etc/tuxbox/config/constant.cw
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000;1010:000000
group = 3


All Channels open when key is correct.

I don't know if this could be called a bug but some PowerVu Channels doesn't open if another PowerVu Channels has same ID.
e.g.
P 0010 -> Unire TV 1 16E and AFN Sports 9.0E
P 0020 -> Unire TV 2 16E and AFN Prime Atlantic 9.0E
P 00A0 -> Unire Blu 16E and AFN Movie 9.0E

Any chance to solve this issue?