TNT Sat - Oscam + CCCam

bigapple · Apr 23, 2019

percivjr said:
Do you really have spaces in the aeskeys or is it just an artefact of the way the site displays them?

My working oscam.server is here:
http://www.sat-universe.com/showpost.php?p=2036939988&postcount=331

with the addition of

,D0

at the end of emcwhitelist.

Note that there are no spaces in the aeskeys.

And of course [email protected] is really:

0500 @ 030B00

(without spaces).

No. Most boards have same thing with spaces so you see this aes Keys broken.
Oscam 11501 Well i was not able to put only for 0500... setting so i moved to 503.Still same answer key not curre.Anywa i found other things.I reached 2 other cards owners same problem.One card. 3/4 channels are not working.

bigapple · May 14, 2019

1night with Gbox tf1 hd antoher night with scam n still

. (ecm) dvbapi (0500@030B00/131A/2015/168:05F906A439C5B5D0F9079BCDE01FC6BE): not found (178 ms) by TNTv5v2 - TMC HD (key to use is not the curr)
2019/05/14 07:13:04 01681106 c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 8 disabled ecmpids!
2019/05/14 07:13:04 01681106 c (dvbapi) Demuxer 0 trying to descramble PID 8 CAID 0500 PROVID 030B00 ECMPID 0569 ANY CHID PMTPID 0514 VPID 051E
2019/05/14 07:13:05 01681106 c (ecm) dvbapi (0500@030B00/131A/2015/168:05F906A439C5B5D0F9079BCDE01FC6BE): not found (1 ms) by TNTv5v2 - TMC HD

master-magic · May 14, 2019

try it with this settings:

caid = 0500
boxkey = 014D902F
deskey = 22D60F37567BAB12F505D8C8C71A22E3
fix07 = 0
ecmwhitelist = 0500@030B00:E0,E4,EC,F4,148,14E,15C,166,168,1C4,D0
detect = cd
detect_seca_nagra_tunneled_card= 0
mhz = 450
cardmhz = 2700
ident = 0500:030B00
aeskeys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
group = 4
disablecrccws = 1
auprovid = 030B00
read_old_classes = 0

percivjr · May 14, 2019

master-magic said:
try it with this settings

but take out the spaces in the AES keys!!!!

Lav · May 14, 2019

i have this config ,working perfect + cacheex mode 2

Code:

[reader]
label = tntsat
protocol = internal
device = /dev/sci0
cacheex_block_fakecws = 1
caid = 0500
boxkey = 014D902F
deskey = 22D60F37567BAB12F505D8C8C71A22E3
ecmnotfoundlimit = 350
detect = cd
mhz = 500
cardmhz = 369
ident = 0500:030B00
aeskeys = 0500@030B00:439726EBB6A939A456C05FF6AA606C43,0,48C19B86A4E2EB7288DFDCE7C2BB7577,0,0,0,0,0,0,0,0,0,9A3EAB0203EBFFCA85B4F18280749F56,2504B382B16D8C6758DB960E311E9351,349883E54D58336DCA750A878ACC5CD5,4A26AD251795A58A11BBC07B53C44348,2844258792F6D9529A328B3E8CD2FD0E,0,0,0,6B1B024D36F60974973CB81FA5E8F01C,127003F8E95100367A556121C779FB6E,9D73BE61D6498E2F20E157E1C6416A23,1DE5B042AD670BB16A3A76BDAD2F7AC0,6747F2E500CF123428337591435C6585,5DB5806B8EE14C2B512DB6FB7C5167C1,E4C24415A9234EDCC8082F84854242AE
group = 1
emmcache = 1,3,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
lb_weight = 300
dropbadcws = 1
disablecrccws = 1

toysoft · May 14, 2019

Latest CCcam 2.3.8 works with TNTSat (v5) cards, be careful to NOT use v6 that will die if used on a Softcam (OScam/CCcam).

TS

bigapple · May 14, 2019

toysoft said:
Latest CCcam 2.3.8 works with TNTSat (v5) cards, be careful to NOT use v6 that will die if used on a Softcam (OScam/CCcam).

TS

But only for MIPS?

And this cccam as client ? NOT internal slot?

bigapple · May 14, 2019

master-magic said:
try it with this settings:

caid = 0500
boxkey = 014D902F
deskey = 22D60F37567BAB12F505D8C8C71A22E3
fix07 = 0
ecmwhitelist = 0500@030B00:E0,E4,EC,F4,148,14E,15C,166,168,1C4,D0
detect = cd
detect_seca_nagra_tunneled_card= 0
mhz = 450
cardmhz = 2700
ident = 0500:030B00
aeskeys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
group = 4
disablecrccws = 1
auprovid = 030B00
read_old_classes = 0

yep same settings

[reader]
label = TNTv5
protocol = internal
device = /dev/sci0
autospeed = 0
caid = 0500
boxkey = 014D902F
deskey = 22D60F37567BAB12F505D8C8C71A22E3
ecmnotfoundlimit = 10
detect = cd
mhz = 450
cardmhz = 2700
ident = 0500:030B00
aeskeys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

group = 2
emmcache = 1,3,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
lb_weight = 500
dropbadcws = 1
disablecrccws = 1
audisabled = 1
read_old_classes = 0

and i have answer "this key is not curr" . Question is is this wrong AES or 08 key from card.

Lav · May 16, 2019

use my aes or remove space on aes keys

toysoft · May 16, 2019

Yes, the bin 2.3.8 is MIPS, and you can use your TNTSat card on your second box that is managed by another 2.3.8 or by an OSCam, or put it directly in the box where is the 2.3.8.

TS

bigapple said:
But only for MIPS?

And this cccam as client ? NOT internal slot?

bigapple · May 17, 2019

Does it mean box key aes and 3des key for tntsat is inside this cccam?

Looks like TNT V5 some cards are done/blocked

mongar · May 17, 2019

oscam for TNT

hi, how to install oscam file on open Atv? please I need help. thank you

kalehrl · May 18, 2019

bigapple said:
Does it mean box key aes and 3des key for tntsat is inside this cccam?

Looks like TNT V5 some cards are done/blocked

Or just expired.
Mine expires in June so there won't be many valid V5's.

Lav · May 18, 2019

my V5 - 6 months to end

bigapple · May 20, 2019

kalehrl said:
Or just expired.
Mine expires in June so there won't be many valid V5's.

Still i will be testing cccam 2.3.8 and lastest ncam.
Each cam for about 2-3hrs.

Lav · May 22, 2019

Does the V5 have a new AES or?
my oscam log message:
(ecm) dvbapiau (0500 @ 030B00 / 131A / 245A / 168: ED3EF781B8D6305E5974A66F2CF9B9DD): not found (159 ms) by tntsat - FRANCE 2 (key to use is not the current)

my oscam.server and aes is on post #345 > http://www.sat-universe.com/showpost.php?p=2037005208&postcount=345
but since yesterday i have this message even though i did update the card

bigapple · May 25, 2019

You just got same as me.

Some ppl are tellin that now this card is blocked.

Lav · May 27, 2019

bigapple said:
You just got same as me.

Some ppl are tellin that now this card is blocked.

(key to use is not the current) My card is tagged and deactivated.

You can use OSCam but you need a private boxkey and deskey aes to fill in your oscam.server file at the level of the reader tntsat.

Be careful, if you use the public aes, the latter being blacklisted, your card will be tagged and deactivated (removal of operational keys, management keys, subscription dates, etc.). It will be good to scratch the windshield but winter has passed

ss24ever · May 29, 2019

bigapple said:
But only for MIPS?

And this cccam as client ? NOT internal slot?

CCcam 2.3.2 have a fix fort TNTsat and Sky De like CCcam 2.38 and it's working ont ARM (VU+ UHD/4K)

reiras · Jul 1, 2019

Compatible CCcam for Dreambox DM800se with A8P sim.

Compatible CCcam for Dreambox DM800se with A8P sim.
I been trying to make it work with a release dm800se-3.2.4.nfi downloaded from https://dreambox.de.

I prefer this image mainly because my wife is used to it.
I have worked with various other images, mainly from openpli (which I moustly made work).
Any suggestions for a working cam as I run out of options and spent hours and days testing.

Hope some may be able to help me.

TNT Sat - Oscam + CCCam

bigapple

Registered

bigapple

Registered

master-magic

percivjr

Registered

Lav

Registered

toysoft

Member

bigapple

Registered

bigapple

Registered

Lav

Registered

toysoft

Member

bigapple

Registered

mongar

Registered

kalehrl

Registered

Lav

Registered

bigapple

Registered

Lav

Registered

bigapple

Registered

Lav

Registered

ss24ever

Registered

reiras