help
- Thread starter padimi70
- Start date
- Messages
- 17,543
Some are having limited success with the new Oscam Emu release, unfortunately ive no way of testing these.
See here
http://www.sat-universe.com/showpost.php?p=493605&postcount=22
Ferret
See here
http://www.sat-universe.com/showpost.php?p=493605&postcount=22
Ferret
Have you tested that version of oscam? I know from various italian forum, that oscam can read the sky italy card only for some seconds and then freeze. At this moment, the only decoder that read correctly this card (without possibility of share) is the QboxHD
First of all ... this I only testet 0919. I have no idea if 093b works or not.
Second of all ... ONLY the ppc (Enigma 1 Dreamboxes!) version works at the moment. mipsel and x86 doesnt work. I don't know why ... They read the card but picture stays black.
So you need a DM 500, DM 600, DM 7000 or DM 7020 as a server. However, you always can connect your DM 7025, DM 800 or DM 8000 to the server...
Here you get oscam 0.99.4 trunk 516 patched:
MEGAUPLOAD - The leading online storage and file delivery service
Download it and copy it to /usr/bin. Set rights to 755.
Then you need the following three config files. Put then in:
/var/tuxbox/config
oscam.config:
#
# main configuration
#
[global]
#nice = -1
WaitForCards = 1
# logging
pidfile = /var/run/oscam.pid
logfile = /var/log/oscam.log
usrfile = /var/log/oscamuser.log
cwlogdir = /var/log/oscam/cw
# monitor
[monitor]
port = 988
aulow = 120
monlevel = 1
# protocols
[newcamd]
key = 0102030405060708091011121314
port = 34000@0919:000000
oscam.user:
[account]
user = user
pwd = pass
monlevel = 0
uniq = 1
group = 1
au = SkyItalia
CAID = 919
oscam.server:
[reader]
Label = SkyItalia
Protocol = intern
Detect = CD
Device = /dev/sci0
Customspeed = 0
mhz = 600
EMMCache = 1,1,2
BoxID = XXXXXXXX <-- here you add your BoxID!
Group = 1
Fallback = 0
CAID = 0919
Your N Line in CCcam or CWS line in mgcamd will then look like this:
CWS = 127.0.0.1 34000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 bzw.
N: 127.0.0.1 34000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14
(127.0.0.1 only if the client is the same with the server, otherwise change the IP to the IP of the Server-Box).
i cannot send link but i see in this
forum that post but am not confirm.
Second of all ... ONLY the ppc (Enigma 1 Dreamboxes!) version works at the moment. mipsel and x86 doesnt work. I don't know why ... They read the card but picture stays black.
So you need a DM 500, DM 600, DM 7000 or DM 7020 as a server. However, you always can connect your DM 7025, DM 800 or DM 8000 to the server...
Here you get oscam 0.99.4 trunk 516 patched:
MEGAUPLOAD - The leading online storage and file delivery service
Download it and copy it to /usr/bin. Set rights to 755.
Then you need the following three config files. Put then in:
/var/tuxbox/config
oscam.config:
#
# main configuration
#
[global]
#nice = -1
WaitForCards = 1
# logging
pidfile = /var/run/oscam.pid
logfile = /var/log/oscam.log
usrfile = /var/log/oscamuser.log
cwlogdir = /var/log/oscam/cw
# monitor
[monitor]
port = 988
aulow = 120
monlevel = 1
# protocols
[newcamd]
key = 0102030405060708091011121314
port = 34000@0919:000000
oscam.user:
[account]
user = user
pwd = pass
monlevel = 0
uniq = 1
group = 1
au = SkyItalia
CAID = 919
oscam.server:
[reader]
Label = SkyItalia
Protocol = intern
Detect = CD
Device = /dev/sci0
Customspeed = 0
mhz = 600
EMMCache = 1,1,2
BoxID = XXXXXXXX <-- here you add your BoxID!
Group = 1
Fallback = 0
CAID = 0919
Your N Line in CCcam or CWS line in mgcamd will then look like this:
CWS = 127.0.0.1 34000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 bzw.
N: 127.0.0.1 34000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14
(127.0.0.1 only if the client is the same with the server, otherwise change the IP to the IP of the Server-Box).
i cannot send link but i see in this
forum that post but am not confirm.