Kopernikus instructions
Upgrade sw in kopernikus with HT (hyper terminal)".
Receiver must be turned OFF "with taster behind receiver".
Open Hyper Terminal,click in File and "Open..".
Select "Icon for kopernikus" and click in "Open".
Here you can see are you "connected HT with receiver".
If we have connections press letter "Z" in testature and hold Z,now you hold letter z and in same time turn receiver on with taster behind receiver.
If you see info like in picture you have connection with receiver, now you dont need more to hold leter "Z".
If you want to upgrade sw "1. S/W Upgrade." press number "1" in testature.
If you want to upgrade boot , channel list or keys "2. Boot Upgrade" press number "2" in testature.
When you press number "2" HT ask you for password (Password is 1234).
"Ok now press "1" in tastature for upgrade sw".
When you see "Ok! Now,send the file" click in transfer and "Send File".
Now click in "Browse" to select sw file.
Select "SW file" witch you want to upgrade in your receivers and click in "Open".
Now click in"Send" to start upgrading sw.
Now you dont need to touch nothing until upgrade is finished.
Wait for next message.
When you see "Flash Update.OK!!" ,in display of your receiver you can see "Good" and after that "red point".
Now your receiver is upgraded with new sw.
Before you start to upgrade sw you must be sure are you select right file for your receiver.
Upgrade sw in kopernikus with HT (hyper terminal)".
Receiver must be turned OFF "with taster behind receiver".
Open Hyper Terminal,click in File and "Open..".
Select "Icon for kopernikus" and click in "Open".
Here you can see are you "connected HT with receiver".
If we have connections press letter "Z" in testature and hold Z,now you hold letter z and in same time turn receiver on with taster behind receiver.
If you see info like in picture you have connection with receiver, now you dont need more to hold leter "Z".
If you want to upgrade sw "1. S/W Upgrade." press number "1" in testature.
If you want to upgrade boot , channel list or keys "2. Boot Upgrade" press number "2" in testature.
When you press number "2" HT ask you for password (Password is 1234).
"Ok now press "1" in tastature for upgrade sw".
When you see "Ok! Now,send the file" click in transfer and "Send File".
Now click in "Browse" to select sw file.
Select "SW file" witch you want to upgrade in your receivers and click in "Open".
Now click in"Send" to start upgrading sw.
Now you dont need to touch nothing until upgrade is finished.
Wait for next message.
When you see "Flash Update.OK!!" ,in display of your receiver you can see "Good" and after that "red point".
Now your receiver is upgraded with new sw.
Before you start to upgrade sw you must be sure are you select right file for your receiver.
Last edited: