Spanish Abertis DTT Sat @ Hispasat 30W - Chat & How to guides

rubeneo said:

So the problem is with the VU+ drivers, in all the VU + it happens...

Click to expand...

No, with the VU+ Zero4k it works. It have another tuner. Only on the VU+ Duo4k have driver issues. It don't find all channels it should.

The VU+ have no updates since Dec19'... And don't give a shit about the customers issues. Told already more times by mail the wish of the issue resolution. Without success.

To ne go est, my recommendation is NOT TO BUY THE VU+ DUO4k... Look for another device.


Gesendet von meinem MAR-LX1A mit Tapatalk

Vu+uno4k ok too.

Vegas21 said:

Hopefully one of you can advise what my problem is as to why I cannot view Abertis.

Click to expand...

I can't see where in the log you switched to the Abertis channel.

The Step by Step Howto does not work with my SF4008 and Open ATV 6.4 iImage.
Oscam shows decryption, but no picture.

2020/06/16 19:08:58 765AB446 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 1646 VPID 0000
2020/06/16 19:08:58 7C2B4463 r (emu) Key not found: F 8598770D
2020/06/16 19:08:58 7C2B4463 r (emu) Key found: F C9F7F714 00000000
2020/06/16 19:08:58 765AB446 c (ecm) dreamosat (P: 2600:000000:06A6:1FFF:0000: #ECM_L:11 #CW=7578FAE7D3B728B27578FAE7D3B728B2 HOP:00): found (1 ms) by emulator
2020/06/16 19:09:06 765AB446 c (dvbapi) Demuxer 0 stopped descrambling for program 06A6 (2600@000000:06A6 unknown)
2020/06/16 19:09:12 765AB446 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 2600 ECM_PID: 1FFF PROVID: 000000
2020/06/16 19:09:12 765AB446 c (dvbapi) Demuxer 0 found 1 ECM pids and 1 STREAM pids in CA PMT
2020/06/16 19:09:12 765AB446 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 1646 VPID 0000
2020/06/16 19:09:12 7C2B4463 r (emu) Key not found: F 8598770D
2020/06/16 19:09:12 7C2B4463 r (emu) Key found: F C9F7F714 00000000
2020/06/16 19:09:12 765AB446 c (ecm) dreamosat (P: 2600:000000:06A6:1FFF:0000: #ECM_L:11 #CW=7578FAE7D3B728B27578FAE7D3B728B2 HOP:00): found (1 ms) by emulator
2020/06/16 19:09:21 765AB446 c (dvbapi) Demuxer 0 stopped descrambling for program 06A6 (2600@000000:06A6 unknown)
2020/06/16 19:09:28 765AB446 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 2600 ECM_PID: 1FFF PROVID: 000000
2020/06/16 19:09:28 765AB446 c (dvbapi) Demuxer 0 found 1 ECM pids and 1 STREAM pids in CA PMT
2020/06/16 19:09:28 765AB446 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 1646 VPID 0000
2020/06/16 19:09:28 7C2B4463 r (emu) Key not found: F 8598770D
2020/06/16 19:09:28 7C2B4463 r (emu) Key found: F C9F7F714 00000000
2020/06/16 19:09:28 765AB446 c (ecm) dreamosat (P: 2600:000000:06A6:1FFF:0000: #ECM_L:11 #CW=7578FAE7D3B728B27578FAE7D3B728B2 HOP:00): found (0 ms) by emulator

0D04 said:

The Step by Step Howto does not work with my SF4008 and Open ATV 6.4 iImage.
Oscam shows decryption, but no picture.
(..cut..)
[/URL]

Click to expand...

Hi,
i struggled a lot to see the Abertis Channels in the last few days, the steps for openAtv are correct.
I found an important role is played by the settings: try to download satvenus settings and try....

go to favorites and then select the "30W Abertis DTT" folder.

Bye,

Hello
I have a Vu+ Uno 4K SE decoder, with VTi 14.0.6 image (ARM architecture).
I cannot install astra-sm package.

After command "opkg install astra-sm" I receive info:

Unknown package 'astra-sm'.
Collected errors:
* opkg_install_cmd: Cannot install package astra-sm.

Click to expand...

After manualy installing astra-sm_0.2-r0_all.ipk by telnet:

Installing astra-sm (0.2-r0) on root.
Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies for astra-sm:
* libc6 (>= 2.26) *
* opkg_install_cmd: Cannot install package astra-sm.

Click to expand...

I know posts:
- https://www.sat-universe.com/showpost.php?p=2037011085&postcount=703
- https://www.sat-universe.com/showpost.php?p=2037075536&postcount=255

Could you help me?

I received answer on PM:

vti use old system
better change image , as testeted uncompatability libary

Click to expand...

EDIT:
My VTI 14.0.6 has a 2.21-r0 version of libc6. Packet astra-sm needs >= 2.26.

root@vuuno4kse:~# opkg info libc6
Package: libc6
Version: 2.21-r0
Provides: rtld(GNU_HASH), eglibc, glibc
Status: install ok installed
Section: libs
Architecture: armv7ahf-vfp-neon
Maintainer: OE-Core Developers <[email protected]>
MD5Sum: 05017250b2e8e256134d1857292e2c29
Size: 1044602
Filename: libc6_2.21-r0_armv7ahf-vfp-neon.ipk
Source:
Description: GLIBC (GNU C Library)
The GNU C Library is used as the system C library in most systems with
the Linux kernel.
Installed-Time: 1570019048

root@vuuno4kse:~# opkg install /tmp/a.ipk
Installing astra-sm (0.2-r0) on root.
Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies for astra-sm:
* libc6 (>= 2.26) *
* opkg_install_cmd: Cannot install package astra-sm.

Click to expand...

Put openatv 6.4 and all will be ok.

Hi everyone,

as requested by some friends of mine, I have updated my setting lamedb, fixing some PIds related to Abertis streams...

In the past, when we made the first tentatives with those packages, some boxes and certain images didn't allow to lock and show services with fixed PIds...

Now, Enigma 2 has been evolved but, on the other side, there are more STBs on the market and not all responding in the same way to changes...

For that reason, I need your help/support, in order to check/verify if all the images and boxes work well with the enclosed settings (30°W Only-Motor with forced PIds) and the latest astra.conf.
Please, in your answers, include box model and image release...


You can find all the Abertis services under the following FavLists:
[30.0 W] ===== HISPASAT 30W ===M= (TV)
[30.0 W] HISPASAT 30W (Radio)

Many thanks again for your precious support/feedback,

Morph

morpheus883 said:

Hi everyone,

as requested by some friends of mine, I have updated my setting lamedb, fixing some PIds related to Abertis streams...

In the past, when we made the first tentatives with those packages, some boxes and certain images didn't allow to lock and show services with fixed PIds...

Now, Enigma 2 has been evolved but, on the other side, there are more STBs on the market and not all responding in the same way to changes...

For that reason, I need your help/support, in order to check/verify if all the images and boxes work well with the enclosed settings (30°W Only-Motor with forced PIds) and the latest astra.conf.
Please, in your answers, include box model and image release...


You can find all the Abertis services under the following FavLists:
[30.0 W] ===== HISPASAT 30W ===M= (TV)
[30.0 W] HISPASAT 30W (Radio)

Many thanks again for your precious support/feedback,

Morph

Click to expand...

Hello, the settings don't work for me. (Formuler F3, OpenATV 6.3)
The only settings working fine is Ciefp Settings (lamedb is the problem)

escoces1968 said:

Hello, the settings don't work for me. (Formuler F3, OpenATV 6.3)
The only settings working fine is Ciefp Settings (lamedb is the problem)

Click to expand...

Hi Escoces, it's strange since I've applied all the changes you have suggested....

Unfortunately, at the moment, I can't check them directly....

escoces1968 said:

Hello, the settings don't work for me. (Formuler F3, OpenATV 6.3)
The only settings working fine is Ciefp Settings (lamedb is the problem)

Click to expand...

1, your astra.conf cooperate with morpheus lamedb ?
2, in morpheus lamedb missing datapid for astra-sm

actual status on ABERTIS

morpheus883 said:

Hi everyone,

as requested by some friends of mine, I have updated my setting lamedb, fixing some PIds related to Abertis streams...

In the past, when we made the first tentatives with those packages, some boxes and certain images didn't allow to lock and show services with fixed PIds...

Now, Enigma 2 has been evolved but, on the other side, there are more STBs on the market and not all responding in the same way to changes...

For that reason, I need your help/support, in order to check/verify if all the images and boxes work well with the enclosed settings (30°W Only-Motor with forced PIds) and the latest astra.conf.
Please, in your answers, include box model and image release...


You can find all the Abertis services under the following FavLists:
[30.0 W] ===== HISPASAT 30W ===M= (TV)
[30.0 W] HISPASAT 30W (Radio)

Many thanks again for your precious support/feedback,

Morph

Click to expand...

This is a new tentative with the following updates:

• Fixed PIds
• Service Names Update (as per sysctl.conf)

Many thanks again for your support,

Morph

Hi
Has the channel La 7 CYL [2306] changed any parameters after the last few days, there is only voice.

Thanks

not change , only video-pid missing in stream

Cali said:

For finding the channel BOM search manually and use Piloto=off. For Aragón no way... Bad drivers. I told that issue to the VU+ but they dont give a date for resolution of the issue...

Click to expand...

I have a Vu+ Uno4K SE (OpenATV 6.4).

I can watch 11.499V channels: TV Castilla - La Mancha (2 pcs.)

Unfortunately, do NOT open for me 11.496H channels: A7, A8, A9 HD, Tele Deporte.
Is there any solution?

Hello. I had to reinstall my octagon sf4008 on another hard drive, with Open ATV 6.4 and I can no longer get the Abertis channels to work, could you give me an updated procedure to reset everything correctly? Thank you.

not read board ?
https://www.sat-universe.com/showpost.php?p=2036759635&postcount=23