Latest Fausto Editor for Diablo CAM [Other CAMs with Season Interface]

dionysos

Registered
Messages
986
Fausto
(C)MASARE Team-Saoud007
(C)FullDump TM



DIABLO KEYS EDITOR/EMULATOR/LOGGER


Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe


Version 1.17 (06/11/2007)
- Editor : DCW keys Exported on softcam file
- Emulator: Polsat problem fixed
- Emulator: Nagra1 correct key showed (worked but show the wrong active key in emu windows)


Special Thanks to:
JKF Intersat Forum for all support give to our tools.
Lucifersat home of Diablo Cam, without this new cam generation editor can't exist.

All guys for language files & translation:
MagicTrance, superseeder, sYgNaL, mcolaciuri, Seti72, Alaancee, Jogo1967, GarField57, Claudio_LDN.
 
Last edited:

dionysos

Registered
Messages
986
Fausto
(C)MASARE Team-Saoud007
(C)FullDump TM


DIABLO KEYS EDITOR/EMULATOR/LOGGER

Version 1.17b (07/11/07)
=============
Some users known problem with base connection under fausto emulator and get access violation message error
This version "normally" solve the problem
Now Connection become little more slower but prevent fatal error
(Memory dumped, somes protection added)

Thanx to Saoud007
 
Last edited:

sugarnspice

Registered
Messages
354
Latest Fausto v1.18 (07/11/2007)

Fausto
(C)MASARE Team-Saoud007
(C)FullDump TM



DIABLO KEYS EDITOR/EMULATOR/LOGGER


Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe


Version 1.18 (07/11/2007)
- Emulator: Some users known problem with base connection under fausto emulator and get access violation message error
This version "normally" solve the problem
(Memory dumped, somes protection added)

- Emulator: added datas "Base TimeOut" stored on file ..\Fausto\Datas\Base TimeOut.ini (file can be edited with NotePad)
Base TimeOut is the max wait delay for response during connection
Value in milliseconds.
1000 milliseconds = 1 second
Default value set to 2500 millisecond = 2,5 seconds in file Base TimeOut.ini
If you increase value connection become more slower
If you decrease value connection become more faster
Personnaly i m used Timeout value at 500 millisecond & work perfect
How to know if Base Timeout is correct
- If base time out very low (example 100 millisecond) you'll see only message "Waiting Ecms"
- if base timeout is near to low BASE IP & CAM IP showed with correct value under emulator window
(Minimum value tested 150 millisecond all showed correctly = extra fast connection)
To prevent all problem recommanded to set value at minimum 1000 millisecond

Example:
TimeOut Value 2500 millisecond
On your machine 4 Port
Only 1 used by the base
It mean 3 port can't reply to connection
In clear wait delay = 2500*3 = 7500 millisecond = 7,5 second before get connection to base
With my personnal setting value same connection = 500 * 3 = 1,5 second before get connection to base
Hope it's clear for all

- Emulator: Added control of ecms length, if not correct, incoming ecms deleted
(already placed a control after on previous version)

- Language file: Spanish updated (Thanks Seti72)



Version 1.17
- Editor : DCW keys Exported on softcam file
- Emulator: Polsat problem fixed
- Emulator: Nagra1 correct key showed (worked but show the wrong active key in emu windows)


Version 1.16
- Base Port Detection now up to MAX (=256)
Port can be redirect without any problem to 256, tested & worked)
- Caids List updated with new caids known. Used with option Edit/Create Caids file
- Emulator: SECA2 remapped, now use external table (Folder ..\Fausto\EMU\S2Tables)
Somes functions optimized, emulator is more faster
- NEW Theme Pack02, include 8 theme (Stored in Extra file)
+ minor changes


Version 1.15

- Editor Function:
Added file Diablo_TPSCRYPT2.TXT (UTC Time=0 -> GMT Time)
Move datas: now possible too by dragging datas
- Export Keys:
Softcam.key added key 80 for ident 007C00 (according to standard softcam file)
- Emulator Function:
BASE IP & ALL CAM IP connected showed
TPS algo modified again, better with 2 cam connected in same time (accruate algo speed)
TPS added UTC TIME under Emulator Window
System Memory managment modified to prevent exception error


Version 1.14 BIS
- Emulator:
Premiere ident 0505 worked (Alpengluhen TVX)
New keys inserted on our Keys files (next post)
Alpengluhen TVX is active from 22:00 to 05:30.
Tested under Fausto Emulator CW decrypted mean worked
Special Thanks to s62 for provider infos


Version 1.14
- Export Keys (Editor function):
Added file Diablo_AES_Keys.txt (Date/Time/PreSE/TPSCrypt2/PostSe/Flags) based on TPS.BIN or V_TPS.DB (if files present)
Added TPScrypt2 AES keys list in Softcam.key file, AES Keys List from TPS.BIN or V_TPS.DB (if files present)
For Edit file on Main Menu select -> Tools -> Edit/Modify Text File
Clic on LOAD button
Select File to Edit
- Emulator:
Added TPS fix (TPSCrypt3), work better
Added possiblity to made TPS auto with TpsBinExtract2.5c (Tick VPlug Case, Define Save Directory, Auto Download & time)
Files will be reloaded when AES Keys out of date
- Joined Latest Fausto Keys, V_TPS.DB & TPS.FNS


Version 1.13
- Fausto Emulator Update: TPS FIXED (TF1,France2,M6,C Cinema,Multivision)
ST20 instructions implemented
Copy TPS.BIN or V_TPS.DB for ABSAT in folder ..\fausto\emu\tps
Add file TPS.FNS in same folder to get TPS Package
To make it work properly you must DELETE FILE TPS_DECR.BIN on cam or ecm will not be sent to base
- Joined keys file updated & Latest V_TPS & TPS.FNS (folder ..\fausto\emu\tps)
NOTA:possible to drag file TPS.BIN,V_TPS.DB & TPS.FNS when Fausto Emulator running (real time update)
Set PC time according to correct time (hour:minutes:secondes) to prevent all cut

CAM Settings:
EMULATOR = ON
DEBUG = ON
AUTO PMT = OFF (prevent AES KEYS LIST autoupdate on Freq 10873 V 3/4 27500)
FIXED CW = OFF

How to test TPS/ABSAT:
1.DELETE FILES TPS_DECR.BIN & KEYS.BIN on cam
2.Close BASE MANAGER
3.Run Fausto
4.Select Fausto Emulator (FE) function
5.Load KEYS.BIN stored on your machine
6.Press Connect
7.Drag file TPS.BIN or V_TPS.DB & TPS.FNS on Fausto Emulator (FE) window
8.TPS/ABSAT will be decrypted
Emulator messages:
"NO VALID AES KEYS FOUND" TPS.BIN or V_TPS.DB out of date or missed
"(WARNING FNS File)" missed TPS.FNS file & only ABSAT will work


Version 1.12
- Added spliter in main windows (Diablo Cas & Datas windows)
Clic on space between us, move cursor
Result Increase/Decrease size of "DIABLO CAS" windows
- Fausto Emulator: Added MECM function (Premiere/KD/...)
- Fausto Emulator: Color changes
Blue Color : Active key in use + CW decrypted
Red Color : Key Unknown or Key in use Down + CW not decrypted (equal 0)
- Joined keys file & Latest TPS.BIN for absat (folder ..\fausto\emu\tps)


All guys for language files & translation:
MagicTrance, superseeder, sYgNaL, mcolaciuri, Seti72, Alaancee, Jogo1967, GarField57, Claudio_LDN.


Enjoy.
 

sugarnspice

Registered
Messages
354
Fausto Keys 07/11/2007 (Worked under Cam Emulator & Fausto Emulator)
TPS/ABSAT: V_TPS.db & TPS.FNS of the day
Mediatech: key 0C
Canaal Digitaal NL: key 0C
Dish Network: key 00

Added new provider:
Name: ORF
caid: 1801 (Nagra2)
provid:003101
Key: ideakey 86 (00)/RSAKey (M1)
How to test: do not export ORF irdeto & cryptowork provid, save file, load new file
Tested under Fausto Emulator worked
Tested under Diablo wireless cam emulator NOT WORK, require firmware fix

Direct Control Word require stealth 176 or 177 under cam Emu (fixed CW = ON), work under last firmware with FE (Fausto Emulator + Fixed CW Ticked)

KEYS.BIN for CAM added (folder Fausto Emu - KEYS.BIN for CAM)
Open The readme.txt in for instructions

Numericable (seca2 id 000084) exported Require table S2_FR.BIN on cam (CAM:\EMU\TABLES)
Chanel open: Berbere Television, Boomerang, PINK TV PINKX, Tele Melody, W9

NOTA: TPS FIXED since Fausto v1.13 (14/10/2007)
Copy files V_TPS.DB & TPS.FNS under folder ..\Fausto\EMU\TPS
Or
Drag same file in Fausto Emulator windows, files will be copied in correct place

@+ Bons Tests
 

sugarnspice

Registered
Messages
354
Fausto/Twinbase - Redirect Base Port - How To.zip



Fausto/Twinbase - Redirect Base Port - How To

Video Help file in EXE Fomat

Include sound, power on your speaker

Redirect base port take effect ONLY after unplug & replug usb cable

@+ Bons Tests
 

sugarnspice

Registered
Messages
354
Latest Fausto v1.19 (04/12/2007)

Fausto
(C)MASARE Team-Saoud007
(C)FullDump TM


DIABLO KEYS EDITOR/EMULATOR/LOGGER


Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe


Version 1.19 (04/12/2007)
-Editor:
*Export Keys AES: file V_TPS.DB/TPS.BIN searched first where XML file loaded if not found searched under folder ..\Fausto\EMU\TPS
*Edit/Create Caids File: by default list not sorted, added case Sort List, added drag datas in destination list
(sort caids like wanted)
*Export keys: CAIDS.XML -> caids follow order of CAS LIST, not sorted
*Updated Import/Export keys (ok when Keys & Services are actif for same ident)
*Import key: removed scrolling of softcam file loaded => more faster (quasi instant)
*Removed Drag datas by using space bar
*Language files updated (removed somes language file not updated since long time)

-Emulator:
*TPS FIXED
*New Key search function implemented, more faster than previous version
*Base connection: modified, get connection at first attempt each time
*Added Package Information (tabsheet Monitor)
*Added Keys Datas List (tabsheet Keys)
*Added TPS Datas List (tabsheet TPS Datas)
*fixed CW not ticked by default
+ somes minor global changes


Version 1.18
- Emulator: Some users known problem with base connection under fausto emulator and get access violation message error
This version "normally" solve the problem
(Memory dumped, somes protection added)

- Emulator: added datas "Base TimeOut" stored on file ..\Fausto\Datas\Base TimeOut.ini (file can be edited with NotePad)
Base TimeOut is the max wait delay for response during connection
Value in milliseconds.
1000 milliseconds = 1 second
Default value set to 2500 millisecond = 2,5 seconds in file Base TimeOut.ini
If you increase value connection become more slower
If you decrease value connection become more faster
Personnaly i m used Timeout value at 500 millisecond & work perfect
How to know if Base Timeout is correct
- If base time out very low (example 100 millisecond) you'll see only message "Waiting Ecms" & nothing come
- if base timeout is near to low BASE IP & CAM IP showed with incorrect value under emulator window
(Minimum value tested 150 millisecond all showed correctly = extra fast connection)
To prevent all problem recommanded to set value at minimum 1000 millisecond

Example:
TimeOut Value 2500 millisecond
On your machine 4 Port
Only 1 used by the base
It mean 3 port can't reply to connection
In clear wait delay = 2500*3 = 7500 millisecond = 7,5 second before get connection to base
With my personnal setting value same connection = 500 * 3 = 1,5 second before get connection to base
Hope it's clear for all

- Emulator: Added control of ecms length, if not correct, incoming ecms deleted
(already placed a control after on previous version)

- Language file: Spanish updated (Thanks Seti72)



Version 1.17
- Editor : DCW keys Exported on softcam file
- Emulator: Polsat problem fixed
- Emulator: Nagra1 correct key showed (worked but show the wrong active key in emu windows)


Version 1.16
- Base Port Detection now up to MAX (=256)
Port can be redirect without any problem to 256, tested & worked)
- Caids List updated with new caids known. Used with option Edit/Create Caids file
- Emulator: SECA2 remapped, now use external table (Folder ..\Fausto\EMU\S2Tables)
Somes functions optimized, emulator is more faster
- NEW Theme Pack02, include 8 theme (Stored in Extra file)
+ minor changes


Version 1.15
- Editor Function:
Added file Diablo_TPSCRYPT2.TXT (UTC Time=0 -> GMT Time)
Move datas: now possible too by dragging datas
- Export Keys:
Softcam.key added key 80 for ident 007C00 (according to standard softcam file)
- Emulator Function:
BASE IP & ALL CAM IP connected showed
TPS algo modified again, better with 2 cam connected in same time (accruate algo speed)
TPS added UTC TIME under Emulator Window
System Memory managment modified to prevent exception error


Version 1.14 BIS
- Emulator:
Premiere ident 0505 worked (Alpengluhen TVX)
New keys inserted on our Keys files (next post)
Alpengluhen TVX is active from 22:00 to 05:30.
Tested under Fausto Emulator CW decrypted mean worked
Special Thanks to s62 for provider infos


Version 1.14
- Export Keys (Editor function):
Added file Diablo_AES_Keys.txt (Date/Time/PreSE/TPSCrypt2/PostSe/Flags) based on TPS.BIN or V_TPS.DB (if files present)
Added TPScrypt2 AES keys list in Softcam.key file, AES Keys List from TPS.BIN or V_TPS.DB (if files present)
For Edit file on Main Menu select -> Tools -> Edit/Modify Text File
Clic on LOAD button
Select File to Edit
- Emulator:
Added TPS fix (TPSCrypt3), work better
Added possiblity to made TPS auto with TpsBinExtract2.5c (Tick VPlug Case, Define Save Directory, Auto Download & time)
Files will be reloaded when AES Keys out of date
- Joined Latest Fausto Keys, V_TPS.DB & TPS.FNS


Version 1.13
- Fausto Emulator Update: TPS FIXED (TF1,France2,M6,C Cinema,Multivision)
ST20 instructions implemented
Copy TPS.BIN or V_TPS.DB for ABSAT in folder ..\fausto\emu\tps
Add file TPS.FNS in same folder to get TPS Package
To make it work properly you must DELETE FILE TPS_DECR.BIN on cam or ecm will not be sent to base
- Joined keys file updated & Latest V_TPS & TPS.FNS (folder ..\fausto\emu\tps)
NOTA:possible to drag file TPS.BIN,V_TPS.DB & TPS.FNS when Fausto Emulator running (real time update)
Set PC time according to correct time (hour:minutes:secondes) to prevent all cut

CAM Settings:

EMULATOR = ON
DEBUG = ON
AUTO PMT = OFF (prevent AES KEYS LIST autoupdate on Freq 10873 V 3/4 27500)
FIXED CW = OFF

How to test TPS/ABSAT:
1.DELETE FILES TPS_DECR.BIN & KEYS.BIN on cam
2.Close BASE MANAGER
3.Run Fausto
4.Select Fausto Emulator (FE) function
5.Load KEYS.BIN stored on your machine
6.Press Connect
7.Drag file TPS.BIN or V_TPS.DB & TPS.FNS on Fausto Emulator (FE) window
8.TPS/ABSAT will be decrypted
Emulator messages:
"NO VALID AES KEYS FOUND" TPS.BIN or V_TPS.DB out of date or missed
"(WARNING FNS File)" missed TPS.FNS file & only ABSAT will work


Version 1.12
- Added spliter in main windows (Diablo Cas & Datas windows)
Clic on space between us, move cursor
Result Increase/Decrease size of "DIABLO CAS" windows
- Fausto Emulator: Added MECM function (Premiere/KD/...)
- Fausto Emulator: Color changes
Blue Color : Active key in use + CW decrypted
Red Color : Key Unknown or Key in use Down + CW not decrypted (equal 0)
- Joined keys file & Latest TPS.BIN for absat (folder ..\fausto\emu\tps)


Special Thanks to:
JKF Forum for all support give to our tools.
Lucifersat home of Diablo Cam, without this new cam generation editor can't exist.

All guys for language files & translation:
MagicTrance, superseeder, sYgNaL, mcolaciuri, Seti72, Alaancee, Jogo1967, GarField57, Claudio_LDN.
 

sugarnspice

Registered
Messages
354
How to speed up Fausto Emulator
cam Settings:
Caids File [CAIDS]
AUTO PMT [OFF] turn it to [ON] before going on SECA1 chanel
EMULATOR [OFF] turn it to [ON] before going on BISS chanel
AUTO N2 [OFF]
Emulator Priority: Changes has no effect on fausto emu (Priority gived first to card)
Fixed CW [OFF]
Debug [ON]
SmartCard Message [Show Never]
Multimedia Mess. [Show Never]
CAS: turn coding system needed to [ON] over to [OFF]
Under Fausto emulator set Fixed CW unticked, tick case before switch to DCW chanel


How to speed up CAM Emulator

cam Settings:
Caids File [CAIDS]
AUTO PMT [OFF]
EMULATOR [ON]
AUTO N2 [OFF] turn it [ON] on package working with auto update when key updated turn it [OFF] again
Emulator Priority: 1.emulator 2.card (inverse priority if you use original card in same time)
Fixed CW [OFF] turn it [ON] before switching on DCWChanel
Debug [OFF]
SmartCard Message [Show Never]
Multimedia Mess. [Show Never]
CAS: turn coding system needed to [ON] over to [OFF]




Example of caids.xml following the coding system order.
Joined in dailly fausto keys & progged on cam

<caid value="1801"></caid>
<caid value="0D04"></caid>
<caid value="0D00"></caid>
<caid value="0D03"></caid>
<caid value="0D01"></caid>
<caid value="0D05"></caid>
<caid value="0100"></caid>
<caid value="0500"></caid>
<caid value="1800"></caid>
<caid value="1762"></caid>
<caid value="0961"></caid>
<caid value="2600"></caid>

Masare Team
 

sugarnspice

Registered
Messages
354
Fausto
(C)MASARE Team-Saoud007
(C)FullDump TM




DIABLO KEYS EDITOR/EMULATOR/LOGGER


Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe


Version 1.20 (06/12/2007)
-Emulator:
*Fixed bug with latest functions implementation (cause tps decryption problems, now solved)
*Added auto key selection in TPS Datas Tabsheet (AES keys in use selected auto, scroll till key selected showed)
Load Keys file, run emulator, go on TPS Datas, cursor move alone when aes key change (=AES key tracer)
*Added Possibilities to changes keys value in tabsheet Keys, ideal for key test
(change apply ONLY in keys buffer memory)
-Language files updated with new datas inserted
(Arabic,Dutch,English,French,Norsk,Spanish others has been removed on previous version)



How to speed up Fausto Emulator
cam Settings:
Caids File [CAIDS]
AUTO PMT [OFF] turn it to [ON] before going on SECA1 chanel
EMULATOR [OFF] turn it to [ON] before going on BISS chanel
AUTO N2 [OFF]
Emulator Priority: Changes has no effect on fausto emu (Priority gived first to card)
Fixed CW [OFF]
Debug [ON]
SmartCard Message [Show Never]
Multimedia Mess. [Show Never]
CAS: turn coding system needed to [ON] over to [OFF]
Under Fausto emulator set Fixed CW unticked, tick case before switch to DCW chanel


How to speed up CAM Emulator
cam Settings:
Caids File [CAIDS]
AUTO PMT [OFF]
EMULATOR [ON]
AUTO N2 [OFF] turn it [ON] on package working with auto update when key updated turn it [OFF] again
Emulator Priority: 1.emulator 2.card (inverse priority if you use original card in same time)
Fixed CW [OFF] turn it [ON] before switching on DCWChanel
Debug [OFF]
SmartCard Message [Show Never]
Multimedia Mess. [Show Never]
CAS: turn coding system needed to [ON] over to [OFF]


Example of caids.xml following the coding system order.
Joined in dailly fausto keys & progged on cam

<caid value="1801"></caid>
<caid value="0D04"></caid>
<caid value="0D00"></caid>
<caid value="0D03"></caid>
<caid value="0D01"></caid>
<caid value="0D05"></caid>
<caid value="0100"></caid>
<caid value="0500"></caid>
<caid value="1800"></caid>
<caid value="1762"></caid>
<caid value="0961"></caid>
<caid value="2600"></caid>

Masare Team
 
Last edited:

aitchala

VIP
Messages
1,394
Fausto v1.21

Fausto
(C)MASARE Team-Saoud007
(C)FullDump TM



DIABLO KEYS EDITOR/EMULATOR/LOGGER


Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe


Version 1.21 (22/12/2007)
-Emulator:
*Added Tracker option: Trace provid datas in use on keys.bin
caid, sid, provid, key index, key value, ecm, control word
Activate tracker: tick case tracker on form monitor
Desactivate tracker: untick case tracker on form monitor
Right Clic on Tracker window:
*Save file: save log in file
*Clear Datas: Delete all datas
-Language files updated with new datas inserted
-New Video help file about Fausto emulator, included new functionnalities & sound
(red circle=Mouse left clic, blue circle=Mouse right clic)
 
Last edited:

vegeku90

Registered
Messages
1,586
Fausto
(C)MASARE Team-Saoud007
(C)FullDump TM



DIABLO KEYS EDITOR/EMULATOR/LOGGER


Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe


Version 1.22 (11/01/2008)
-Editor:
Modele.xml modified -> cryptoworks keyid:00 keytype:81 named "CardKey (06)" (old name: 06)
(joined Fausto_Keys.xml updated with new name)
Diablo_keys.txt datas format modified
-Emulator:
*Tab Keys: added Key type
*Tab Tracker: modified -> log ALL datas receive
*Nagra1/2 Control Word key -> fixed now worked, picture cleared with right key (only with FE, not work with cam emulator)
*Cryptoworks Control Word key -> fixed now worked, picture cleared with right key (only with FE, not work with cam emulator)
 

REDHOU

Registered User
Messages
486
Fausto 1.23

DIABLO KEYS EDITOR/EMULATOR/LOGGER

Version 1.23 (12/01/2008)
-Emulator:
*Tab BISS added: Now is possible to decode BISS chanel
Cam settings used for tests:
EMULATOR=OFF
AUTO PMT=OFF
FIXED CW=OFF
DEBUG=ON
How to proceed:
1.Select Emulator function
2.Load Keys.bin
3.Press Connect Button
4.On your receiver select BISS Chanel wanted (example Disney ME 10°E)
5.Press on tabsheet BISS & Select same chanel (example Disney ME 10°E)
6.Select Cam IP (Cam ip list extracted during emulator connection)
7.Press Button "Send key To Cam"
Now chanel decrypted
NOTA:
*Record number = record position on Keys.bin
*Key can't be send if emulator not connected (button "Send key To Cam" disabled)
*Worked with duplicate ident
*Now KEYS.BIN with only biss progged on cam is not required
-Language File: added new datas (ready for translation)

thanks to :MASARE Team-Saoud007


Fausto
(C)MASARE Team-Saoud007
(C)FullDump TM
 
Last edited:

vegeku90

Registered
Messages
1,586
Fausto v1.23b (13/01/2008)

Fausto
(C)MASARE Team-Saoud007
(C)FullDump TM


DIABLO KEYS EDITOR/EMULATOR/LOGGER


Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe


Version 1.23b (13/01/2008)

-Emulator:
* Tab BISS: Fixed bug when BISS coding system not at top list, now key selected is correct


Special Thanks to:

All guys for language files & translation:
MagicTrance, superseeder, sYgNaL, mcolaciuri, Seti72, Alaancee, Jogo1967, GarField57, Claudio_LDN.


Code:
[COLOR="Blue"]Many Thanks to (C)MASARE Team-Saoud007 (C)FullDump TM[/COLOR]
 
Last edited:

REDHOU

Registered User
Messages
486
Fausto 1.23C

DIABLO KEYS EDITOR/EMULATOR/LOGGER

Version 1.23c (13/01/2008)
-Emulator:
*Tab BISS: Fixed bug on CAM IP List extraction
*Tab BISS: Possible to enter CAM IP in manual mode

Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe

thanks to :MASARE Team-Saoud007


Fausto
(C)MASARE Team-Saoud007
(C)FullDump TM
 

Midosat

Registered
Messages
1,659
Fausto v1.23c setup

Fausto v1.23c setup @

Fausto

DIABLO KEYS EDITOR/EMULATOR/LOGGER


Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe


Version 1.23c (13/01/2008)
-Emulator:
*Tab BISS: Fixed bug on CAM IP List extraction
*Tab BISS: Possible to enter CAM IP in manual mode
 

wij

Registered
Messages
2,976
Fausto
(C)MASARE Team-Saoud007
(C)FullDump TM



DIABLO KEYS EDITOR/EMULATOR/LOGGER


Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe


Version 1.24 (15/01/2008)
-Editor:
Export keys: Daiblo_Keys.txt modified again (SID Value placed after KeyId & KeyType)
Import keys: added possibilty to import keys from diablo_keys.txt
1.Select Import keys Function
2.Define Coding system wanted for import: button "Coding System"
3.Press Load file button
4.On Filter file Select "Diablo_Keys.txt" (1-Softcam.Key, 2-Diablo_Keys.txt) -> cf Screenshot joined
5.Open Diablo_keys.txt
After file loading import start auto
PS: possible to drag file "Diablo_Keys.txt" directly on import window (more faster, more simple)
-Emulator:
*Tab Monitor: popup menu added (mouse right clic)
Option -> "NO BISS Keys"
If Ticked Disable BISS keys loading on TAB KEYS (Reduce memory usage, increase key search speed, no infos send by the cam)
If UnTicked Enable BISS keys loading on TAB KEYS
Ticked by default
-Language Files: added new datas (ready for translation
 

wij

Registered
Messages
2,976
Fausto Language file update: Italian
Author: s62
Updated: 16/01/2008

1. Unzip file
2. Copy .SIL file under Folder ..\Fausto\Languages

Now new version can be used or reloaded
 

dionysos

Registered
Messages
986
Fausto
(C)MASARE Team-Saoud007
(C)FullDump TM


DIABLO KEYS EDITOR/EMULATOR/LOGGER


Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe


Version 1.25 (29/01/2008)


-Logger:
*Card Traffic log modified (more clear)
-Emulator:
*Added support of irdeto2 provider on TAB KEYS (keys showed correctly)
*When BISS Keys value modified in Tab KEYS changed too on Tab BISS
*Tuneled somes betacrypt caid to Nagra2: provid concerned
-Premiere (caid:1702/1722 added under coding system Irdeto)
-Premiere Star (caid:1702 added under coding system Irdeto)
-Premiere Alpengluehen TVX (caid:1702 added under coding system Irdeto)
-KD (caid:1722 added under coding system Irdeto)
-ORF (caid:1702 added under coding system Irdeto)
cf keys file joined for keys definition
On cam setting set AUTO PMT=ON if caids.xml not updated with caid 1702/1722
Test example:
1.Run emulator
2.Load Keys.bin
3.Go on tabsheet Keys
4.Select provid KD (caid:1801) and replace key86 & Key96 by Zero
5.On receiver select chanel MTV at 23.5°E
6.Press Connect button
Now KD decoded with caid irdeto
How Provid added on XML:
1.Create New provid under Nagra2 Coding system
2.Drag New Provider under Irdeto Coding System
3.Update datas (Caid/provid/86/96/RSA)
4.Save file
+ minor Global changes

Special Thanks to:

All guys for language files & translation:
MagicTrance, superseeder, sYgNaL, mcolaciuri, Seti72, Alaancee, Jogo1967, GarField57, Claudio_LDN, S62.
 
Last edited:

wij

Registered
Messages
2,976
New Fausto v1.26 is out

New Fausto v1.26 is out
What's new:
-Emulator:
TPS FIX -> WORKING
 

baloota

Registered
Messages
2,055
Fausto
(C)MASARE Team-Saoud007
(C)FullDump TM



DIABLO KEYS EDITOR/EMULATOR/LOGGER


Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe


Version 1.27 (10/04/2008 )
-Editor:
*Load Keys.bin modified -> now recreate perfect XML image file from BIN file
all betacrypt/irdeto1 provider set in correct coding system
all irdeto2 provider set in correct coding system
*Export keys: Softcam.key file show the correct provid for betacrypt provid tuneled Nagra2
*Language files:
German language file added
New datas added, ready for translation (Captions, Hints,Strings)
-Logger:
*Irdeto2 Ecms parsed correctly (for same caid several ecms come on same datas pack)
-Emulator:
*Irdeto2 Ecms parsed correctly (for same caid several ecms come on same datas pack)
*Added official Cards support: Tab "Cards"
For all details & informations read file "Fausto & Cards support.txt" on folder ..\Fausto


Special Thanks to:
JKF Intersat Forum for all support give to our tools.
All guys for language files & translation:
MagicTrance, superseeder, sYgNaL, mcolaciuri, Seti72, Alaancee, Jogo1967, GarField57, Claudio_LDN, S62, Professor Moriarty, Twister, s62, Stauffie.


Enjoy.
 

vegeku90

Registered
Messages
1,586
Fausto
(C)MASARE Team-Saoud007
(C)FullDump TM



DIABLO KEYS EDITOR/EMULATOR/LOGGER


Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe



Version 1.28 (13/06/2008)
-Editor:
Due to new evolution of Fausto (multicam support => editor is not specific to diablo cam now)
Those file as been renamed
Fausto Keys.XML -> Fausto MultiCam Keys.XML
Diablo_CAIDS.TXT -> Fausto_CAIDS.TXT
Diablo_Idents_List.txt -> Fausto_Idents_List.txt
Diablo_Keys.txt -> Fausto_Keys.txt
Diablo_Softcam.key -> Fausto_Softcam.key
Diablo_TPSCRYPT2.txt -> Fausto_TPSCRYPT2.txt
Diablo_AES_Keys.txt -> Fausto_AES_Keys.txt
If old keys file exist delete it & export keys file again

-Logger:
*Events manager modified -> Less cpu usage

-Emulator:
*Events manager modified -> Less cpu usage
*Tab Control word added: now it easy to view all Control word exported on BIN File (can help for cleaning BIN File)
*Tab CARDS: Added 2 new coding system (cf file Fausto & cards support.txt)
*Tab Season: Season emulation added now Fausto Emulator work also with ALL CAMS & Receiver Cards Reader
(Predator, Predasaur, Joker/Neotion, Matrix Reloaded (MR1051), Irdeto Module, Magic Module..., Cristor,Clarke tech,...embedded card reader)
Must Work too with others cams but we haven't for tests
Keys.bin file shared with all cams/receiver cards reader
For more details report to files
*Fausto & Season Interface How To.txt
*Fausto & Season Bauds Settings.txt
*Fausto & Season Bauds Rate Table.txt
More infos come soon on chat section
 
Top