OSCAM HELP

fisht99

Registered
Messages
110
Hi All

After days of frustration I am calling upon my fellow sat lovers for some advice. I am not sure if this is even possible but here goes.

I have installed OSCAM with emu patch on a linux PC. I have loaded SoftCam.Key as an emulator and would like to share it with several sat boxes on my local network.

I have connected my sat boxes via CCCam to the OSCAM server and can seethe connection succesfully but still cannot decode BISS chaneels with the keys in SoftCam.Key

Am I on the right track? is this even possible?

dbBS6bS
 
Last edited:

fisht99

Registered
Messages
110
Hi

Thankyou for your response. I have "want emu" enabled but still no good.

oscam.conf

[global]
logfile = /usr/local/etc/oscam.log
nice = -1

[cccam]
port = 12000
nodeid = 2A5692BE10EA14FE
version = 2.1.3

[streamrelay]

[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255

oscam.user

[account]
user = user
pwd = pass
group = 1

oscam.server

[reader]
label = emulator
protocol = emu
device = emulator
disablecrccws_only_for = 0E00:000000
caid = 0500,0604,0E00,1010,1801,2600,2602,2610
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000
group = 1
emmcache = 2,1,2,1
ccchop = 2
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000

[reader]
label = local
protocol = cccam
device = 127.0.0.1,12000
user = user
password = pass
inactivitytimeout = 30
cccversion = 2.1.3
cccwantemu = 1
ccckeepalive = 1
 

Rickk

Registered
Messages
2,375
[reader]
label = local
protocol = cccam
device = 127.0.0.1,12000
user = user
password = pass
inactivitytimeout = 30
cccversion = 2.1.3
cccwantemu = 1
ccckeepalive = 1

here must the ip of your box in
192.168.xxx.xx
 

fisht99

Registered
Messages
110
Thanks again

Just to clarify I am running OSCAM-EMU on linux PC with SofCam.key emulator. Then connecting my boxes with CCCam protocol to the linux PC.
 

Rickk

Registered
Messages
2,375
why do not you use oscam on your boxes?

a simple config for clients

oscam.conf
[global]
logfile = /var/log/oscam.log

[dvbapi]
enabled = 1
au = 1
user = dvbapi
boxtype = dreambox

[webif]
httpport = 8888
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
http_status_log = 1

oscam.user
[account]
user = dvbapi
au = 1
group = 1

oscam.server
[reader]
label = remote cccam
protocol = cccam
device = 192.168.xxx.xx,12000
user = user
password = pass
group = 1
cccversion = 2.1.3
cccwantemu = 1
ccckeepalive = 1

ip from linux pc

install oscam on your boxes and load with copy insert config
 

fisht99

Registered
Messages
110
Thanks

I am not sure if i can out oscam on my box. I have a gtmedia v8pro2

I can now connect to my oscam via cccam and i can see in the log when i change channels all caid except for 2600

I have caid 2600 added to the emu but cccam just wont see it.
 

m35istan

Registered
Messages
692
Thanks

I am not sure if i can out oscam on my box. I have a gtmedia v8pro2

I can now connect to my oscam via cccam and i can see in the log when i change channels all caid except for 2600

I have caid 2600 added to the emu but cccam just wont see it.
Hi,
Use cs378x protocols

On network ecm requests (between 2 boxes connected via network protocols like cs357x or cs378x) the ecm pid will always be '0', even if dvbapi is used. For example:

OSCam (box1) <-> (network connection through cs378x) <-> OSCam (box2) <-> Emu


https://github.com/oscam-emu/oscam-patched/wiki/BISS1-and-BISS2-mode-1-config
 

Rickk

Registered
Messages
2,375
in your c line with yes the emu is allowed
C: server ip 12000 username password yes
 

fisht99

Registered
Messages
110
OK so this is how my config has ended up on the linux PC oscam:

oscam.conf


[global]
logfile = /usr/local/etc/oscam.log
initial_debuglevel = 10
nice = -1
cwlogdir = /usr/local/etc/oscam_CW.log
emmlogdir = /usr/local/etc/oscam_EMM.log

[cs357x]
port = 11000
serverip = 192.168.0.10

[cs378x]
port = 15000@0642:000000;15500@2600:000000
serverip = 192.168.0.10

[newcamd]
port = 10001@2600:000000
allowed = 127.0.0.1,192.168.0.0-192.168.255.255
key = 0102030405060708091011121314
keepalive = 1

[cccam]
port = 12000
nodeid = 2DF6ED3310BF1546
version = 2.3.2
reshare = 5
ignorereshare = 1
stealth = 1

[streamrelay]
stream_relay_enabled = 0
stream_emm_enabled = 0

[dvbapi]
enabled = 1
pmt_mode = 0
delayer = 60
ecminfo_type = 4
user = local
boxtype = dreambox

[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httppollrefresh = 10
httphideidleclients = 0
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowreaderinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255


OSCAM.server

[reader]
label = emulator
protocol = emu
device = emulator
detect = cd
group = 1
emmcache = 1,2,6,1
cccreshare = 5
ccchop = 2

[reader]
label = Reader-1
enable = 0
protocol = newcamd
device = 192.168.0.10,10001
key = 0102030405060708091011121314
user = local
password = pass
disableserverfilter = 1
keepalive = 1
group = 1
cccreshare = 5

[reader]
label = biss-reader
enable = 0
protocol = constcw
device = /usr/local/etc/constant.cw
caid = 2600
group = 1
cccreshare = 5

[reader]
label = OSEmu378
protocol = cs378x
device = 192.168.0.10,15000
user = local
password = pass
caid = 0642
ident = 0642:000000
group = 1
emmcache = 1,1,2,1
cccreshare = 5

[reader]
label = OSEmu378_Biss
protocol = cs378x
device = 192.168.0.10,15500
user = local
password = pass
caid = 2600,FFFF,FF
group = 1
emmcache = 1,1,2,1
cccreshare = 5


I can see my clients connect and when selecting a channel with CAID 0642 it searches the emu (fine) but when i select a channel with CAID 2600 1FFF it doesnt acknockledge at all. My hadu CS client says "No usable peer"
 
Top