OpenPCTV (enigma2 on pc)

Welcome my fiends

I like to talk about this new OS (Linux distribution) which you can installing it in you pc
With you DVB-S & DVB-S2, card support


First

What is OPENPCTV?


OpenPCTV is a XBMC-based open source Linux distribution for personal computers and embedded system to be used as DVR/PVR set-top boxes and media player appliance boxes. Just like E2BMC, OpenPCTV is also designed as a hybrid integration between XBMC and Dream box’s Enigma2 PVR software scripts, using VDR (Video Disk Recorder) as the TV
Tuner backend server and Open Bricks based Linux operating system images for embedded systems





Feature:

It is integrated with XBMC 13.1 Gotham,VDR 2.1.6,Enigma2PC,kernel 1.15.3
It supports more than 60 languages,switching once to change to the language interface of XBMC/VDR/Enigma2.
You don’t need to manually edit the configuration file,using the dialog menu style to complete the most of configurations.
You can normally use it by copying the ISO file to a USB disk(creating a virtual disk files loopdisk.img in a USB disk, USB disk capacity shall be no less than 1G)
It supports hardware decoding of AMD radeon HD5xxx (and above), Nvidia Geforce and Intel HD Graphics Cards. It can be normally used under Enigma2/VDR/XBMC. For Nvidia Geforce Graphics Cards, both nouveau and nvidia enable VDPAU driver support for hardware-accelerated video decoding. By default we use the nouveau driver, you can also use the nvidia driver to get better support.System startup automatically detects your video card and does not require any special settings. Also depending on the programme (VDPAU/VAAPI) and do some optimization setting.
It directly drives infrared receiver device using the kernel, Microsoft MCE remote and the CIR remote receiver on motherboard can directly support(MCE RC6). We recommend the motherboard with CIR (such as Biostar, ASRock etc.)
For DVB devices, the kernel can drive most of the devices. We also provide additional drive, such as TBS, DVBSky and s2-liplianin. You can install additional packages in the configuration setup.
DiSEqC setting and channels scanning are all configured with dialog menu style. According to the configuration of DiSEqC.conf , it uses scan-s2 to scan channel.
VDR VNSI pvr addon is already installed in XBMC, you can run XBMC with dr-backend by default..


Support:

Support for DVB-S2, DVB-C, DVB-T2, ATSC high-definition signal reception and playback
You can choose one of Enigma2, VDR, and XBMC front-end player
Support Intel (VAAPI), AMD (VDPAU over UVD), Nvidia (VDPAU) graphics hardware decoding
Small size, simply install the USB flash disk can be used normally (Also can be installed to your hard disk)
Easy to configure. Use the dialog menu style to complete the configuration


Let us start with video clip for OPENPCTV OS (Linux distribution) project


http://youtu.be/lPcJ-kZliaY

This video clip was preparing by Developer of the OS (Linux distribution)


Second and third, clip my experience with this OS (Linux distribution)

https://www.youtube.com/watch?v=7b6bJ_Ib_y4

The second clip will see how OPENPCTV boot on pc and watch an SAT CHANNEL Direct after open

Third clip

https://www.youtube.com/watch?v=c5c4p-FKO-o

Will see watching encryption channel with use OSCAM Plugin



Instructions to test this OS (Linux distribution) in your PC

1- You will need (DVB-S card) for me I had tested with Sky Star 2, Sky Star 2 Express HD
Automatically detecting by OS no need for choose your DVB-S card form the additional diver through setup mode

For this type, you have to enter to choose your Driver

A. SkyDVB DVB-S card’s
B. Tbs DVB-S card’s
C. Tbc DVB-C card’s
D. Tbs-atsc card’s
E. skyDVB DVB-C card’s
F. dvb3221 DVB-C card’s (Chinese)



2- For me I recommended to install this OS in old hard disk and keep your windows hard disk drive away you can use big USB Flash Disk if you don't has old H.H.D (Hard disk drive)

3- Flash disk min 1 GB for burn OpenPCTV on it (bootable)

4- Internet (I thing this already Existing)
Instruction for prepare USB Disk flash

Link for Download the last updated OpenPCTV ISO

https://sourceforge.net/projects/openpctv/files/latest/download?source=files


Download the ISO and prepared your USB disk flash to next step
Now extract the ISO to your flash disk

Then go to CMD as administrator.

Follow the pictures below to make it bootable flash

Assume your flash latter is I

C :\> I:
I :\> cd boot
I: \boot > bootinst.bat

After that your flash now Bootable


Finally, we now ready for installation the OPENPCTV in your PC


Follow the instruction gradually for installation process by the pictures

Download the pic from this link

https://userscloud.com/mqqrzipdawus


This is a clip to how to install but virtual machine


https://www.youtube.com/watch?v=rx9ZXpQvWZs

P.M: this is he command to use and navigator the project

*In Enigma2PC, Some remote control keys are remapped to local PC keyboard
RED -> F1
GREEN -> F2
YELLOW -> F3
BLUE -> F4

VOL UP -> + (numeric pad) or +
VOL DOWN -> - (numeric pad) or -

NEXT CHANN. -> ARROW DOWN
PREV CHANN. -> ARROW UP
NEXT BOUQUET -> PAGE DOWN
PREV BOUQUET -> PAGE UP

EXIT -> ESC
MENU -> SPACE
INFO -> F5 or I
OK -> ENTER

EPG -> E or F6
POWER -> F10
RECORD -> R
TV -> T
VIDEO -> V
AUDIO -> A
RADIO -> D
MUTE -> M
TIMESHIFT -> P

QUIT ENIGMA2 -> X
FULL SCREEN MODE -> F11
Standby -> F12

magictails said:

hi

what emu works on this release

i try this that week end

thank

Click to expand...

oscam plugin working fine with cccam sever

more info about this project



OpenPCTV 1.0
2014-08-28 Posted
After a 15-month development cycle, OpenPCTV finally ushered in the first official version. Thanks to the author Henry Liu contributions

OpenPCTV is based on the Linux open source project openbricks cross-compiler platform, she set TV, high-definition video, IPTV collection, taped in one, to create a full range of HTPC multimedia platforms. Also has a number of different architectures based versions, such as the PC platform i386 and x86_64, ARM-based platforms for Freescale IMX6Q TBS2910, Raspberry Pi, based on full-Chi cubietruck A20, etc. (the release of the 1.0 Release of being only based i386 version).

Its main functions and features are:

Support DVB-S2 satellite, DVB-C cable, DVB-T2 terrestrial, ATSC US cable HD signal acquisition and taped.
Provides support for multiple languages ​​worldwide, currently OpenPCTV users throughout the world.
You can choose any Enigma2, VDR, XBMC play three different platforms.
Full support for AMD, Nvidia, Intel three graphics hardware decoding HD playback.
Easy to install, configure and use. You do not need to use the Linux command line, by way of dialog to complete most of the configuration dialog. You can simply install the system can be used normally U disk (of course you can also use USB Live CD install to the hard drive or burn). If you install to use the SSD will have a better experience.
Currently tested the PC platform (including Enigma2, VDR, XBMC hardware decoding high-definition playback capabilities of the three broadcast platforms):

magictails said:

hi

C :\> I:
I :\> cd boot
I: \boot > bootinst.bat

i try
to my usb stick F: on fat32
admin session on w8 32bits

C :\> F:
F :\> cd boot
le chemin d'acces est introuvable // The access path is untraceable


test on
usb 4go fat 32 with : openpctv-1.1-RC1-i386.iso
laptop + DVB tbs 6980 usb
intel pentium T3200 dual core 2 Ghz
Nvidia GF 9300 GS
ram 3 go

@ +

Click to expand...

I mean after extracted OpenPCTV ISO to your USB disk flash
then go to CMD
and do the command as above

how to set your cccam sever in oscam plugin

ooOO_SORGOS_OOoo said:

Ahmad salam alaikom

can you try wicardd i386 ,i686 or x64 vercion?

Click to expand...

sorry man this Emu

and I talk about the OPENPCTV
which is a OS working in PC have OSCAM plugin

that's supported by OS