You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Stable version of Enigma2
- Thread starter BigMax
- Start date
mobilenvidia
Registered
- Messages
- 5
I'm happily using AAF WinterImage based on TDT build 0.4.6
I've not tried the 0.5.1
Each build has it's own little quirks.
But over all the features that come with these builds far out way the little bugs that come up.
My main issues are.
No Sound via HDMI at all, I suppose this is due to the Dreambox having only DVI out, nothing another set of cables don't fix.
MP4's play but with stuttering sound, 1080p MKV's play fine.
There is no absolute stable version, I get crashes when doing certain tasks.
But for day to day tasks the machine works as it should.
The TF7700 could do with a reset button, pulling out the power cord is not ideal, may try and see if I can find a jumper on the Mobo.
If you do go down the Enigma2 road, to help you get started.
Once you copy the initial bootloader to the 7700, unplug the 7700 then plug it back in again, DON'T use the power button on either the unit or remote.
This will then boot from the bootloader just flashed.
Otherwise it will just sit there and do nothing.
Another point for the unwary is when the machine first starts after doing it's stuff and you get to choosing the Output to TV.
In HDMI press the enter button on remote, then press the down button to get to 576p or higher.
My TV doesn't like 576i and took me a little while to work this out with a black screen that didn't give much of a clue to what was going on.
Other than that, not going back to Toppy Firmware again.
Enjoy
I've not tried the 0.5.1
Each build has it's own little quirks.
But over all the features that come with these builds far out way the little bugs that come up.
My main issues are.
No Sound via HDMI at all, I suppose this is due to the Dreambox having only DVI out, nothing another set of cables don't fix.
MP4's play but with stuttering sound, 1080p MKV's play fine.
There is no absolute stable version, I get crashes when doing certain tasks.
But for day to day tasks the machine works as it should.
The TF7700 could do with a reset button, pulling out the power cord is not ideal, may try and see if I can find a jumper on the Mobo.
If you do go down the Enigma2 road, to help you get started.
Once you copy the initial bootloader to the 7700, unplug the 7700 then plug it back in again, DON'T use the power button on either the unit or remote.
This will then boot from the bootloader just flashed.
Otherwise it will just sit there and do nothing.
Another point for the unwary is when the machine first starts after doing it's stuff and you get to choosing the Output to TV.
In HDMI press the enter button on remote, then press the down button to get to 576p or higher.
My TV doesn't like 576i and took me a little while to work this out with a black screen that didn't give much of a clue to what was going on.
Other than that, not going back to Toppy Firmware again.
Enjoy