Strong 8000_8100 Revolution 3.0 Beta

furb3t

Registered
Messages
6
The TiS, after so much time from the exit of the Revolution 2.0, have decided to publish a release Beta of the revolution 3.

Because a Beta:
For the simple motive that the definitive version is not still ready for problems that we are meeting on the Motor, however at the same time we want to give the opportunity to the consumers to be able to make a will the new firm and therefore to help us to resolve the problems and the bugs before the definitive release.

What does it have in + this version Beta in comparison to the Revolution 2.0?
Different novelties have been introduced that have involved different functions and aspects, particularly:

Graphic section:
- restyling bandeau and volume
- restyling panel € mU
- restyling panel Tunings
- restyling panel Spar
- new initial img of start
- new panel for management Card NDZ (to finish)

You section Updatings:
- increased the channels by 2000 to 4091;
- increased the transponders by 255 to 510;
- management of the spar from 3 to 32;
- moved the FAT Mhw in other position that has allowed the increase of the usable forms for the Mhw from 39 60;

Section Novelty:
- riscritto totally the function Virtual Card what time it allows a best and + complete management of the updatings;
- adds the possibility of management of new systems;
- inserted the possibility to listen to the channels Radio from the new panel;
- inserted area you Play with the possibiltà to play to Fillet;
- riscritta totally the function Tuning, with possibility to make conditioned tunings;

Now Firm x strong is AU for this Provider: S0030, V009400, V008000, and V007C00. For AU you must insert operational K_E_y and chek in option of bandeau (+,b,3) AU: SI.

....other things that have forgotten you will discover her.

For firm, Bug or suggestion you can find at our forum :)
Regards
 
X

xtrue

Tps on firm strong 8100 revolution 3.0 Beta
============================================

Hey guy, i have understand how it works revolution with tps. Now also strong have tps AU!!!!

Ok let's go to the procedure:
- update the time on deco; you must press C (on display of deco compare INT) e go on a channel of SkY like Sky Cinema 1 or 2, wait a few seconds and press Guide to see if the time is correct, repeat until the time is update. Otherwise you can set the time in pannel "impostazioni".

- now press C and on display will appear EmU;

- in pannel Virtual Card, insert the operative's key for provider 007C00; you can found it in every satupload or in softcam.

- now go to channel France 2 or 3 or 4 or 5 (i prefer 5, my favourite number!!), and waiting update. On display of decoder appear the write tPS0. You must wait beetween 10sec and 5min. Don't change channel during this update. When update is complete, you listen a beep and on display appear the channel.

This procedure must be repeat every day!!! Remember to update time of clock, it's important to have no freeze or black screen!!

Regards and Enjoy!!!!
 
Top