DVB Dream versions checking chat

mx3000

Registered
Messages
46
Tested: Running well.
Please, check! :)


2ikf89c.jpg
 

jetset

Registered
Messages
1
i have sky star 2 pci card and install last ver of driver
i work ed by dvb dream ver 2.6 good but i change windows to 10 and now have problems for scan chanell with all new ver of dvb dream.
my problem is have not signal for tune and get this message" couldn't get lock" for scan all transponders but technisat have signal in these transponders
any one have this problems?
 

maxi_c_v8

Registered
Messages
21
hi everyone! i tested V3.4 in windows 10 x64 (1709) & TBS 6903 , and have the same issue
it gives such an error

dvbdream.jpg

when try to scan any TP dvbdream freezes :(

----------------------------0--------------------------

other topic. i have problem with 4k screen. dont get the way to scaling correctly 1080->2016P. madVR dont works like in the MPC-HC. scaling first -> 1915x1075 , second 1917x1077->2194x1232 (?) . never go to 2016p. other render like EVR image have the same problem , looks blurred. On SetTopBox not have that problem and 1080->2016p scaling looks great !!
 

Jkl Alp

Registered
Messages
10
heu... so the app in the other tread is fake and I upgraded from 3.3 to 3.2 !!?? Someone should correct the dl tread!
 

trendnet

Registered
Messages
78
hi everyone! i tested V3.4 in windows 10 x64 (1709) & TBS 6903 , and have the same issue


when try to scan any TP dvbdream freezes :(

----------------------------0--------------------------

other topic. i have problem with 4k screen. dont get the way to scaling correctly 1080->2016P. madVR dont works like in the MPC-HC. scaling first -> 1915x1075 , second 1917x1077->2194x1232 (?) . never go to 2016p. other render like EVR image have the same problem , looks blurred. On SetTopBox not have that problem and 1080->2016p scaling looks great !!

I got that same error on one of my 2 computer's with a TBS 6902 dvb card useing DVB Dream 3.2.1 this only happen a few weeks ago , but I never seen that problem as yet on my other computer useing the same software version and the same DVB card ....
 
Last edited:

maxi_c_v8

Registered
Messages
21
i using v3.3 , 4k HEVC channels 47.5W NSS806 have isues:
• on GTX980 dont work Hybrid decoder or GPU render, DVBDream&LAVs only use CPU (i7 4790k) for decoding&render and freezes&Laging all time , cyberlink codecs works better and only use CPU but around 70-85% of i7 and dont lag
• on GT1030 (includes NVENC HEVC 10bit hardware decoder) channels work fine only with LAVs filters and DXVA2 'native' , rest dont use HEVC-hardware-decoder. other hand 4kuniverse BISS HEVC freezes after working well for a feew minutes
• audio AAC-ADTS (4kuniverse) only wokrs after scanning&add chanel, if you clouse DVBDream and reasume, it shows DTS audio on Info bar and dont reproduce any sound
 
Last edited:
Top