sunray4 hd 800se v2 sim 2.2

plavac_63

Registered
Messages
5
I searched image OpenPli for sunray4 hd 800se v2 sim 2.2 (trialtuner)!
Please help me find the best image for this decoder!
THANKS!
 

toysoft

Member
Messages
1,828
Install from feeds, any driver from internet for other box or image will fail the image and corrupt it

TS
 

drnabilnagy1

Registered
Messages
7
DEAR I HVE SUNNRAY HD SE RECIVER WHICH NOT BOOTING AND NOT ACCEPTING ANY IMAGE BEFOR IT WAS ACCEPTING BUT NOW NOT WHAT TO DO IN THIS PROBLEM?
 

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,481
DEAR I HVE SUNNRAY HD SE RECIVER WHICH NOT BOOTING AND NOT ACCEPTING ANY IMAGE BEFOR IT WAS ACCEPTING BUT NOW NOT WHAT TO DO IN THIS PROBLEM?

Any error on the front screen ?

If not are you able to get the box into Flashing mode or not ?
 

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,481
no screen error but i can notflash image

So powering off at plug and holding the standby button in then powering back on and holding it in gives you no IP on front screen ?

Remember you can not flash a image via Wifi you must have Ethernet cable connected.
 

drnabilnagy1

Registered
Messages
7
am able to get into flash mode but not flashing and telling calculating and takes long time and not progressing and not flashing
 

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,481
If that is the case have you tried using various browsers.

Also check your firewall is not blocking flashing.
 

toysoft

Member
Messages
1,828
To flash you need the TWO cables, serial/usb from box to PC et RJ45 from box to Router/Modem.

TS
 

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,481
2 cables with DreamUP or similar yes but flashing via browser should be fine since he get reach the firmware upgrade page.
 
Top