DM800HD : Japhar Sim Images

OpenPLI-4.0-+Gstreamer+1.7.1_Ferrari-SSl88F_DM800_20160106_RAED

OpenPLI-4.0-+Gstreamer+1.7.1_Ferrari-SSl88F_DM800_20160106_RAED



Click here to enlarge

Clean and Faster image For Internal and External Flash

Patched Under Ubunut

-This Image For (Jafhar sim) (Big Thank's MastaG)
-Modded to Ferrari DM800 Boxes
-Added last drivers 20131228
-Privet Japhar sim Feed
-IPTV(Works Very Fast)

About remote control How to adjustment ****
menu
setup
system
extra settings
input device
press ok to dreambox remote control (native) and adjustment as you like ..

Warningon't Make Update Online

DM800HD : OpenPli 4.0 IPTV by MastaG / Japhar Team with 1300 FREE IPTV Channels and with GStreamer 1.9.0.1b (May 6th 2016)

OpenPli 4.0 IPTV by MastaG / Japhar Team with 1300 FREE IPTV Channels and with GStreamer 1.9.0.1b (May 6th 2016)



Changes:

- Latest gstreamer 1.9.0.1 snapshot based on recipes from christophecvr:
* Proper fix for HLS segfault on stop
* Re-enable the rtmp seeking and potential segfault fix
* gstreamer1.0-libav is now built against system ffmpeg instead (this differs from chris recipes) *
* dvbmediasink patches for Vu Solo 4K, hd1265 and hd1500 from oe-alliance
- FFMpeg updated to 3.0.2 and is now installed by default *
- Backports to enigma2 for sh4 (mainly servicemp3.cpp related)
- Fix EPG on sh4 receivers
- exteplayer3 is now installed by default, thank you mx3L and samsamsam *
- gstplayer is now installed by default, thank you mx3L and samsamsam
- Mediatomb is now in the feeds
- MediaPlayer2 is now installed by default, thank you mx3L
- SubsSupport (for MediaPlayer2) is now installed by default, thank you mx3L
- No more russian tuxtxt
- Its now possible to set the debug level again in the UI-settings menu, thank you christophecvr
- Latest enigma2 changes, thank you OpenPLi
- latest openpli-oe-core changes, thank you OpenPLi
- ServiceApp, thank you mx3L !!!

Known issues:
- On spark7162 (and 7111 probably as well) fragmented streams such as hls (m3u8) will skip and freeze a lot.
This happened sometime after the official Gstreamer 1.8.0 release and I didnt found the cause yet.
It is not related to the dvbmediasink since it doesnt happen on mips receivers and the code in the dvbmediasink didnt change.
Configure your streams to play with exteplayer3 instead, read below.
- * On the 64MB Dreambox models (DM800HD, DM800Se and DM500HD) there is not enough space to ship ffmpeg.
This means that exteplayer3 and gstreamer1.0-libav arent installed as well because they depend on ffmpeg.
See my attached guide to copy over the root filesystem to a storage device.
- Some Dreambox remotes may behave very sensitive.
This causes button presses to register multiple times instead of just once.
As a workaround you can adjust the key interval:
Go to: Menu - System - Input devices - dreambox remote control (native).
Set "Change repeat and delay settings" to yes
Set "Interval between keys when repeating:" to 200ms or 300ms.
Press green button (OK)
Now set the same delay for: "dreambox advanced remote control (native)" as well.
- DM800 first boot will take a while, please be patient. The next boot will be faster.

Thanks for the hard work from mx3L and samsamsam you can now play your IPTV streams with exteplayer3 or gstplayer instead of the default dvbmediasink.
Especially using exteplayer3 will give much better performance on playing HLS streams compared to gstreamer + dvbmediasink.
For example, playing DJING underground 720p never worked very well on my DM800HD and now it does

DM800HD+ Japhar : https://mega.nz/#!5B81hYqB!x-XZaEfEWe8egpbHtbP63u1nJit3nO2zXuFWsGMcBbA

Sim2-Unoff.-Gstreamer 1.9-DM800-2016-06 OpenPLi 4-Jasper-20160701


Clean, no changes.

Sim2

SSL84d

#########################################################################################
Hi there,



Here's a new batch of images based on OpenPLi 4 with many contributions from various openpli.org forum members and some bits taken from oe-alliance.

So this is basically a tribute to them



jzi3r6.jpg



It took me a while since I was very short on time and I had to re-install my build-rig, move to a new feed-server etc...



SO DUE TO A NEW FEED-SERVER ONLINE UPDATE FROM PREVIOUS IMAGES IS NOT POSSIBLE!

DON'T TRY TO CHANGE THE URL IN THESE OLD IMAGES SINCE THERE'S BEEN TOO MANY CHANGES WHICH WILL BREAK THINGS!

PLEASE FLASH A CLEAN IMAGE INSTEAD!



So here's whats up:

- Brand new bootlogo thanks to .:MarcinO:.

- OpenPLi enigma2 rev: 4bf2f1e45593065f9e2b4563f30463487b727c94

- OpenPLi oe-core rev: d76cfe6a39c6613ac77578840b214f0f1e748a39

- Taapat's Fulan enigma2 rev: 2a984c500f5b2ea657f68742b7dc4e47f5586483

- New receivers supported:

* osmini

* osminiplus

* spycat

* spycatmini

* et7000mini

* xpeed lx

* xpeed lx pro

- New feed server located in Europe thanks to the Japhar team!

- New Japhar IPTV list

- No more use of UPX compression on ARM platform (should fix the Vu+ Solo 4K build)

- Latest gstreamer 1.9 revision from master branch

- FFmpeg 3.0.2 with extra options enabled (based on oe-e recipe)

- Kodi 16.1 for Vu+ Solo 2, Solo Se, Duo 2, and Solo 4K (thanks to mx3L for his bsp + recipes)

- More wifi drivers (mt7601, rt7777 etc..) taken from oe-alliance

- Slightly newer v4l modules for kernel 2.6.18 (dm800)

- New version of mx3L's serviceapp now supports EPG and embedded subtitles

- New version of exteplayer3

- Flash extender PPanel for dm800, dm800se and dm500hd (* Please read below)

- Many other changes I forgot to mention...



Known issues:

- On spark7162 (and 7111 probably as well) fragmented streams such as hls (m3u8) will skip and freeze a lot.

This happened sometime after the official Gstreamer 1.8.0 release and I didn't found the cause yet.

It is not related to the dvbmediasink since it doesn't happen on mips receivers and the code in the dvbmediasink didn't change.

Configure your streams to play with exteplayer3 instead, read below.

- Some Dreambox remotes may behave very sensitive.
This causes button presses to register multiple times instead of just once.
As a workaround you can adjust the key interval:
Go to: Menu - System - Input devices - dreambox remote control (native).
Set "Change repeat and delay settings" to yes
Set "Interval between keys when repeating:" to 200ms or 300ms.
Press green button (OK)
Now set the same delay for: "dreambox advanced remote control (native)" as well.

- DM800 first boot will take a while, please be patient. The next boot will be faster.





Flash extender for DM800, DM800Se and DM500HD:

Since these receiver only feature 64MB of internal flash space, I've been unable to ship all packages.

ffmpeg, exteplayer3, gst1.0-libav, mediaplayer2, iptv player, subssupport etc.. are missing due to insufficient space.

That's why I've created a simple PPanel script for moving the entire internal flash to an external storage device such as internal hdd or usb disk.

The PPanel will also install all the missing packages for you.

So you can have all the bells and whistles like the other receivers

ny7885.jpg

However please note that:

- It will format your storage device thus deleting everything.

- It's not compatible with other flash-extenders such as barry alen, multiboot etc...

- You'll need a working internet connection when running the PPanel or else it cannot install the missing packages.

- You need to patient! As the script runs you'll only see a black screen which an take up to 15 minutes depending on the size/speed of your storage device and your internet connection.



You can find it under Blue Panel -> PPanels





ServiceApp and exteplayer3:

Thanks for the hard work from mx3L and samsamsam you can now play your IPTV streams with exteplayer3 or gstplayer instead of the default dvbmediasink.

Especially using exteplayer3 will give much better performance on playing HLS streams compared to gstreamer + dvbmediasink.

For example, playing DJING underground 720p never worked very well on my DM800HD and now it does



You can read all about it here: http://forums.openpl...nd-exteplayer3/



In a nutshell here's how it works.

In your /etc/enigma2/ directory you have your channel bouquets with the .tv and .radio extensions.

Inside these files there's this for example:


By default this will play with the gstreamer dvbmediasink (which is currently broken for sh4).

If you like to play your stream with exteplayer3 instead you should change the 4097 to 5002, like this:


You can also change it to play with gstplayer using 5001:


So it's like this:

4097 = default player, which is the dvbmediasink if serviceapp is not enabled

5001 = gstplayer

5002 = exteplayer3



Now let's say you'd like to convert your entire bouquet to play with exteplayer3, simply login to your receiver with telnet/ssh (use PuTTY for Windows).

And issue to the following commands:

First stop enigma2:

init 4

Then change your bouquet to make all streams play with exteplayer3, lets say userbouquet.favourites.tv:

cd /etc/enigma2
sed -i 's/^#SERVICE 4097/#SERVICE 5002/g' userbouquet.favourites.tv

Then restart enigma2:

init 3

That's it !



You can also make exteplayer3 the default backend for playing back everything.

Go to Menu -> Plugins -> ServiceApp and set exteplayer3 as default.



Keep in mind that with exteplayer3 or gstplayer as default backend you will not have support for external subtitles yet (.srt for example).

That's why I've added MediaPlayer2 and SubsSupport from mx3L.



Please thank mx3L for the hard work he put into this


Have fun and make sure to report back your findings!

MastaG

#########################################################################################
Download:

2016-07-01

https://mega.nz/#!Ml5VmSIY!SVMg6hcOjF2D-PpukAxVAno7jJvzZ8jmqBOJQggeai4



Jasper

DM800HD-e_star-Unofficial- Gstreamer 1.9 images 2016-06 -based on- OpenPLi 4

Clean, no changes.

e_star SIM

SSL84

################################################## #######################################
Hi ,

Here's a new batch of images based on OpenPLi 4 with many contributions from various openpli.org forum members and some bits taken from oe-alliance.

So this is basically a tribute to them



jzi3r6.jpg



It took me a while since I was very short on time and I had to re-install my build-rig, move to a new feed-server etc...



SO DUE TO A NEW FEED-SERVER ONLINE UPDATE FROM PREVIOUS IMAGES IS NOT POSSIBLE!

DON'T TRY TO CHANGE THE URL IN THESE OLD IMAGES SINCE THERE'S BEEN TOO MANY CHANGES WHICH WILL BREAK THINGS!

PLEASE FLASH A CLEAN IMAGE INSTEAD!



So here's whats up:

- Brand new bootlogo thanks to .:MarcinO:.

- OpenPLi enigma2 rev: 4bf2f1e45593065f9e2b4563f30463487b727c94

- OpenPLi oe-core rev: d76cfe6a39c6613ac77578840b214f0f1e748a39

- Taapat's Fulan enigma2 rev: 2a984c500f5b2ea657f68742b7dc4e47f5586483

- New receivers supported:

* osmini

* osminiplus

* spycat

* spycatmini

* et7000mini

* xpeed lx

* xpeed lx pro

- New feed server located in Europe thanks to the Japhar team!

- New Japhar IPTV list

- No more use of UPX compression on ARM platform (should fix the Vu+ Solo 4K build)

- Latest gstreamer 1.9 revision from master branch

- FFmpeg 3.0.2 with extra options enabled (based on oe-e recipe)

- Kodi 16.1 for Vu+ Solo 2, Solo Se, Duo 2, and Solo 4K (thanks to mx3L for his bsp + recipes)

- More wifi drivers (mt7601, rt7777 etc..) taken from oe-alliance

- Slightly newer v4l modules for kernel 2.6.18 (dm800)

- New version of mx3L's serviceapp now supports EPG and embedded subtitles

- New version of exteplayer3

- Flash extender PPanel for dm800, dm800se and dm500hd (* Please read below)

- Many other changes I forgot to mention...



Known issues:

- On spark7162 (and 7111 probably as well) fragmented streams such as hls (m3u8) will skip and freeze a lot.

This happened sometime after the official Gstreamer 1.8.0 release and I didn't found the cause yet.

It is not related to the dvbmediasink since it doesn't happen on mips receivers and the code in the dvbmediasink didn't change.

Configure your streams to play with exteplayer3 instead, read below.

- Some Dreambox remotes may behave very sensitive.
This causes button presses to register multiple times instead of just once.
As a workaround you can adjust the key interval:
Go to: Menu - System - Input devices - dreambox remote control (native).
Set "Change repeat and delay settings" to yes
Set "Interval between keys when repeating:" to 200ms or 300ms.
Press green button (OK)
Now set the same delay for: "dreambox advanced remote control (native)" as well.

- DM800 first boot will take a while, please be patient. The next boot will be faster.


Flash extender for DM800, DM800Se and DM500HD:

Since these receiver only feature 64MB of internal flash space, I've been unable to ship all packages.

ffmpeg, exteplayer3, gst1.0-libav, mediaplayer2, iptv player, subssupport etc.. are missing due to insufficient space.

That's why I've created a simple PPanel script for moving the entire internal flash to an external storage device such as internal hdd or usb disk.

The PPanel will also install all the missing packages for you.

So you can have all the bells and whistles like the other receivers

ny7885.jpg

However please note that:

- It will format your storage device thus deleting everything.

- It's not compatible with other flash-extenders such as barry alen, multiboot etc...

- You'll need a working internet connection when running the PPanel or else it cannot install the missing packages.

- You need to patient! As the script runs you'll only see a black screen which an take up to 15 minutes depending on the size/speed of your storage device and your internet connection.

You can find it under Blue Panel -> PPanels

ServiceApp and exteplayer3:

Thanks for the hard work from mx3L and samsamsam you can now play your IPTV streams with exteplayer3 or gstplayer instead of the default dvbmediasink.

Especially using exteplayer3 will give much better performance on playing HLS streams compared to gstreamer + dvbmediasink.

For example, playing DJING underground 720p never worked very well on my DM800HD and now it does



You can read all about it here: http://forums.openpl...nd-exteplayer3/



In a nutshell here's how it works.

In your /etc/enigma2/ directory you have your channel bouquets with the .tv and .radio extensions.

Inside these files there's this for example:

Code:

#SERVICE 4097:0:0:0:0:0:0:0:0:0:http%3a//cdn.djing.com/tv/u-05.m3u8JING Underground (CDN)
#DESCRIPTION DJING Underground (CDN)

By default this will play with the gstreamer dvbmediasink (which is currently broken for sh4).

If you like to play your stream with exteplayer3 instead you should change the 4097 to 5002, like this:

Code:

#SERVICE 5002:0:0:0:0:0:0:0:0:0:http%3a//cdn.djing.com/tv/u-05.m3u8JING Underground (CDN)
#DESCRIPTION DJING Underground (CDN)

You can also change it to play with gstplayer using 5001:

Code:

#SERVICE 5001:0:0:0:0:0:0:0:0:0:http%3a//cdn.djing.com/tv/u-05.m3u8JING Underground (CDN)
#DESCRIPTION DJING Underground (CDN)

So it's like this:

4097 = default player, which is the dvbmediasink if serviceapp is not enabled

5001 = gstplayer

5002 = exteplayer3


Now let's say you'd like to convert your entire bouquet to play with exteplayer3, simply login to your receiver with telnet/ssh (use PuTTY for Windows).

And issue to the following commands:

First stop enigma2:

init 4

Then change your bouquet to make all streams play with exteplayer3, lets say userbouquet.favourites.tv:

cd /etc/enigma2
sed -i 's/^#SERVICE 4097/#SERVICE 5002/g' userbouquet.favourites.tv

Then restart enigma2:

init 3

That's it !
You can also make exteplayer3 the default backend for playing back everything.
Go to Menu -> Plugins -> ServiceApp and set exteplayer3 as default.
Keep in mind that with exteplayer3 or gstplayer as default backend you will not have support for external subtitles yet (.srt for example).
That's why I've added MediaPlayer2 and SubsSupport from mx3L.
Please thank mx3L for the hard work he put into this
Have fun and make sure to report back your findings!
MastaG

***********************

_http://www.mediafire.com/download/mzdu6czj2ostx7u/e_star-Unofficial-_Gstreamer_1.9_images_2016-06_-based_on-_OpenPLi_4.nfi.zip

in dm800 when i press the blue button it show me a option ppanels,i press ok and there is nothig in there,black page after this,,am i doing something wrong?

BlackHole IPTV v20 by MastaG with IPTV (1300+ FREE IPTV Channels) for Japhar NC3 SuperSim3

BlackHole IPTV v20 NC3 (Ferrari V3)

BlackHole IPTV v20 by MastaG with IPTV (1300+ FREE IPTV Channels) for Japhar NC3 SuperSim3



- Original cvs.
- Blazing fast.
- GStreamer 1.9.1.
- Using the mx-hq9w skin (which is their latest official skin they are using atm).
- Backported fixes from OpenPLi, including a fix for a possible GS.
- Applied Dreambox specific fixes for ac3/dts bypass support.
- Applied backports from official PLi to support the latest gstreamer and eLogging interface.
- Implemented the official Vu+ addon manager using the Green button (inside the Blue panel).
- Feeds online.

Thank you MastaG !

Enjoy !

DM800HD : https://mega.nz/#!ncg1QJRT!TRa3QmqzPzgmhNDTK5JsYXqVwU9rp20IzNZGDX3TG5o

OpenPLi 4.0 IPTV v20 by MastaG with IPTV (1300+ FREE IPTV Channels) for Japhar NC3 SuperSim3



- Support for BlackHole skins (the analog arrows), so the original mx-hq9w also works flawless on PLi now
- New gstreamer 1.9.1.1 with many fixes
- New ca-certificates
- OpenPLi now features a overscan wizard which lets you adjust the OSD to the borders of your TV (by PLi-team)
- Python-pycrypto now installed by default to satisfy many plugins
- Lots of stuff I forgot

DM800HD Japhar : https://mega.nz/#!6cZHSYIZ!-dJFteuzZk1oeVSYnoXaq4peWveC8dHFUbC_B3SmuQA

BlackHole_IPTV_Japhar_DM800HD_wIPTV_v20

Announcements / News ! :

- BlackHole IPTV v20 by MastaG with IPTV (1300+ FREE IPTV Channels) for Japhar NC3 SuperSim3



- Original cvs.
- Blazing fast.
- GStreamer 1.9.1.
- Using the mx-hq9w skin (which is their latest official skin they are using atm).
- Backported fixes from OpenPLi, including a fix for a possible GS.
- Applied Dreambox specific fixes for ac3/dts bypass support.
- Applied backports from official PLi to support the latest gstreamer and eLogging interface.
- Implemented the official Vu+ addon manager using the Green button (inside the Blue panel).
- Feeds online.

DM800HD : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=9022

DM500HD : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=9024

DM800HDse : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=9023

DM8000HD : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=9021

VU+ Solo : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=9025

VU+ Duo : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=9028

VU+ Uno : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=9027

VU+ Solo2 : http://www.ourdreambox.com/ubbthreads.php?ubb=showflat&Number=9026


- OpenPli 4.0 IPTV by MastaG / Japhar Team with 1300 FREE IPTV Channels and with GStreamer 1.9.1.1

July 20th, 2016 !

works this image with DM800 original or works only for clones ?

works this for original DM800 hd ?

only for japhar nc3 sim cards

OpenPLi 4.0 IPTV v21 con GStreamer 1.11 and ExtePlayer3 with 1300 IPTV FREE FTA Channels Here is the long waited OpenPLi 4.0

OpenPLi 4.0 IPTV v21 con GStreamer 1.11 and ExtePlayer3 with 1300 IPTV FREE FTA Channels

Here is the long waited OpenPLi 4.0 IPTV built by our Japhar Admin with GStreamer 1.11 and ExtePlayer3 (by Default)



- OpenPLi 4.0 from Japhar Team with IPTV (1300+ FREE FTA IPTV Channels)

We Thank MastaG for having handed us the sources last July of the v20 version for us to build all the newer versions. This image is a working much better than the v20, also if the v20 was the best and still the best compared with all other images around. We put a lot of work and efforts into it, wishing you all to enjoy that new release as soon as we would be happy with it.

This image is a MAJOR update, so you can reflash it or you can as well UPDATE IT ONLINE thru the Feeds that were updated today. Its few days we are working and testing it, we believe that now its time for all you to have it ! Enjoy ;o) it as well !

After few months work and improved software such as GStreamer to v1.11 and latest December 2016 ExtePlayer3, we are ready now to release our new image OpenPLi 4.0 IPTV for DM800HD, DM800HDse, DM500HD and DM8000HD boxes with Japhar Sim.

- Japhar v21, links to MEGA for Download

DM800HD+ :

Download Link from DataFileHost :
TS

Feeds updated

DM800HD :

DM800HD: OpenPli 4.0 Triple Tuner ExtePlayer3 / GStreamer 1.11 IPTV 1000+ free FTA IPTV channels

DM800HD: OpenPli 4.0 Triple Tuner ExtePlayer3 / GStreamer 1.11 IPTV 1000+ free FTA IPTV channels



Description of the image :

- For JAPHAR NC3 SIM (SSL84J)
- Image compatible with DVB-S2, DVB-C, DVB-T and IPTV / Streaming, all in one image
- Image optimized for Streaming and IPTV
- GStreamer 1.11 for Streaming / IPTV and playback (VoD)
- ExtePlayer3 for Streaming / IPTV and playback (VoD)
- Pre-installed list of more than 1000 channels FTA IPTV / Streaming Free
- Latest version of Python-pycrypto, new ca-certificates, dvbmediasink, e-alliance rtmpdump, overscan wizard, SSLv3 support, FFmpeg, mx3Ls serviceapp with EPG support, Flash extender PPanel, ffmpeg, exteplayer3, gst1.0-libav , Mediaplayer2, iptv player, subssupport, HLS segfault, Mediatomb, MediaPlayer2, SubsSupport, latest OpenSSH OpenSSH OpenSSL, and Jam 5.3.
- Enigma2 of OpenPLi 4.0 of December 2016
- Built-in Wifi support for the following chipsets in the image
********Ralink RT73, RT61, RT3070, RT3370, RT5370, RT7777
********Realtek 8712u, 8188cu / 8192cu
********ZyDAS zd1201, zd1211rw
- Integrated Addon Manager with the option of installing the following USB DVB-T Dongles/keys
Abilis AS102-SKY (AS102)
AverMedia Volar Black 850 (AF9015)
AverMedia A835 / B835 (AF9035)
AverMedia Tv Volar Green (AF9035)
AverMedia Sky DigitalKey A867 (A867)
Hauppauge Nova-T (DIB0700)
Hauppauge WinTV Siano Ministick (SIANO)
Pinnacle PCTV 74e (AS102)
TerraTec Cinergy T2 (CinergyT2)
TerraTec Cinergy T XE (AF9005)
TerraTec Cinergy T XE v2 (AF9015)
**Which of the following Chipsets
AF9005 Chipset
Chipset AF9015
Chipset AF9035
SIANO Chipset
Chipset DIB0700
Chipset AS102
Chipset A867

Name of the file: openpli-enigma2-4-dm800.nfi (OpenPLi 4.0 v21 - Triple Tuner)
Download Links for DM800HD (Based on / with SSL84J)

Turboit:

DataFileHost:

Mega:

DM800HD : OpenPLi 4.0 IPTV v21a ExtePlayer3+GStreamer 1.11, 1300 IPTV FREE FTA Channels

OpenPLi 4.0 IPTV v21a ExtePlayer3+GStreamer 1.11, 1300 IPTV FREE FTA Channels



Winter version of OpenPLi 4.0 IPTV built by Japhar with ExtePlayer3 (and GStreamer 1.11 from Feeds)

Build of January 15th 2017, Feeds have been updated, so you can do an online update if you want.

- v21a for Japhar, links to MEGA for Download

DM800HD :

OpenBlackHole IPTV v21 by Japhar ExtePlayer3/GSTreamer 1.11.1 and 1300 FTA IPTV FREE

OpenBlackHole IPTV v21 by Japhar ExtePlayer3/GSTreamer 1.11.1 and 1300 FTA IPTV FREE

OpenBlackHole IPTV v21 Final by Japhar with ExtePlayer3/GStreamer 1.11.1 including 1300 FTA FREE IPTV Channels



News :
- January 2017 Build of Enigma2/packages
- Lot of Fixes ;o)
- DTS audio on your DM800HDse, DM8000 and DM500HD, as well as DM800HD (but low CPU, could be unstable)
- Fast and reliable Skin
- etc...


DM800HD+ :

DM800HD : OpenBlackHole v22a Exteplayer3, GStreamer, Enigma2 improved

DM800HD : OpenBlackHole v22a Exteplayer3, GStreamer, Enigma2 improved, all new software updated like Web Interface, etc.



Download :

DM800HD Japhar : https://mega.nz/#!UIcWUYxJ!ol02nirlx6rXVq8w-89KFReAMXa55GoXiuuJTS2Zh90

DM800HD : DE-OpenBlackHole 1.5 IPTV Japhar ExtePlayer3/GStreamer 1.11.1/ 1300 IPTV FREE FTA Ch [IMG]http://www.openblackhole

DE-OpenBlackHole 1.5 IPTV Japhar ExtePlayer3/GStreamer 1.11.1/ 1300 IPTV FREE FTA Ch



- Compatible Wifi dongles (Built-in) :

Ralink RT73, RT61, RT3070, RT3370, RT5370, RT7777
Realtek 8712u, 8188cu / 8192cu
ZyDAS zd1201, zd1211rw


- DVB-T Installable from Feeds :

Abilis AS102-SKY (AS102)
AverMedia Volar Black 850 (AF9015)
AverMedia A835 / B835 (AF9035)
AverMedia Tv Volar Green (AF9035)
AverMedia Sky DigitalKey A867 (A867)
Hauppauge Nova-T (DIB0700)
Hauppauge WinTV Siano Ministick (SIANO)
Pinnacle PCTV 74e (AS102)
TerraTec Cinergy T2 (CinergyT2)
TerraTec Cinergy T XE (AF9005)
TerraTec Cinergy T XE v2 (AF9015)

and the following Chipsets
AF9005 Chipset
Chipset AF9015
Chipset AF9035
SIANO Chipset
Chipset DIB0700
Chipset AS102
Chipset A867

DM800HD Japhar :

DM800HD : OpenPLi 4.0 IPTV Japhar ExtePlayer3/GStreamer 1.11.1/ 1300 IPTV FREE FTA Ch

OpenPLi 4.0 IPTV Japhar ExtePlayer3/GStreamer 1.11.1/ 1300 IPTV FREE FTA Ch



- Compatible Wifi dongles (Built-in) :

Ralink RT73, RT61, RT3070, RT3370, RT5370, RT7777
Realtek 8712u, 8188cu / 8192cu
ZyDAS zd1201, zd1211rw

- DVB-T Installable from Feeds :

Abilis AS102-SKY (AS102)
AverMedia Volar Black 850 (AF9015)
AverMedia A835 / B835 (AF9035)
AverMedia Tv Volar Green (AF9035)
AverMedia Sky DigitalKey A867 (A867)
Hauppauge Nova-T (DIB0700)
Hauppauge WinTV Siano Ministick (SIANO)
Pinnacle PCTV 74e (AS102)
TerraTec Cinergy T2 (CinergyT2)
TerraTec Cinergy T XE (AF9005)
TerraTec Cinergy T XE v2 (AF9015)

and the following Chipsets
AF9005 Chipset
Chipset AF9015
Chipset AF9035
SIANO Chipset
Chipset DIB0700
Chipset AS102
Chipset A867

DM800HD Japhar :