HD smargo

bigapple

Registered
Messages
147
Any1 know how to open HD+ 03 using smargo?

this card is working only as internal.

adding herre log


(reader) HD+_hd03 [smargo] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz= AUTO, cardmhz=369)

(reader) HD+_hd03 [smargo] card detected
(reader) HD+_hd03 [smargo] Error activating card.
(reader) HD+_hd03 [smargo] Error activating card.
(reader) HD+_hd03 [smargo] Error activating card.
(reader) HD+_hd03 [smargo] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1
(reader) HD+_hd03 [smargo] card initializing error
(reader HD+_hd03 disabled by WebIf
(reader) HD+_hd03 [smargo] Restarting reader
(reader) HD+_hd03 [smargo] creating thread for device /dev/ttyUSB0
(webif) reader HD+_hd03 enabled by WebIf
(reader) HD+_hd03 [smargo] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz= AUTO, cardmhz=369)
(reader) HD+_hd03 [smargo] card detected
(reader) HD+_hd03 [smargo] Error activating card.
(reader) HD+_hd03 [smargo] Error activating card.
(reader) HD+_hd03 [smargo] Error activating card.
(reader) HD+_hd03 [smargo] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1
(reader) HD+_hd03 [smargo] card initializing error
 

bigapple

Registered
Messages
147
This log is from smartreader connected to NAS device
other one is from smargo+ connected to VU aslo didnt work.


Smartreader protol doesnt work also with NAS server Synology but same server have smargo protocol working
Anyway no1 confimerd working HD03 under smargo+ protocol?
 
Top