You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
SSLoaders (SIM2 TEAM for Dm800se & SIM2.10 card)
- Thread starter Benkurd
- Start date
- Status
- Not open for further replies.
New secondstage bootloader ssl84 for dm800se from sim2
New secondstage bootloader ssl84 for dm800se from sim2
sim2 announced release of sim2-ssl-84-dm800se today according to the plan of continuous support for sim2 dreambox users.
This great development is one of steps to achieve ability of users to enjoy latest images with latest original drivers.
sim2 also announced that work in progress to release ssl-84 for other sim2 dreambox models.
new ssl-84 is used as following
To use new ssl with original images:
-Flash new ssl-84 nfi to dreambox by internet explorer or dreamup(this used once if the current dreambox bootloader is ssl82 or older)
-Flash original image as usual
-Flash ssl-84 nfi to dreambox again and before rebooting the dreambox
This method may not apply to few images like latest releases of edg nemesis and oozoon and better to use already patched images with new ssl built in
To use sim2 patched images with new ssl 84
if the dreambox has old ssl 82 bootloader,flash new ssl-84 nfi first by internet explorer or dreamup then flash sim2 image
if new ssl84 already flashed to dreambox just flash the sim2 image by usual method
with the new ssl ,original drivers and most recent releases of plugins are working without modifications with exception of few plugins like webinterface and software manager may need to apply available specific patches.
To take backup for the flash image with integrated new ssl we advice to use TSFlashBackup v 2.0
To install and to make backup of barry allen multiboot image we advice to use sim2-barryallen v 2.0
New secondstage bootloader ssl84 for dm800se from sim2
sim2 announced release of sim2-ssl-84-dm800se today according to the plan of continuous support for sim2 dreambox users.
This great development is one of steps to achieve ability of users to enjoy latest images with latest original drivers.
sim2 also announced that work in progress to release ssl-84 for other sim2 dreambox models.
new ssl-84 is used as following
To use new ssl with original images:
-Flash new ssl-84 nfi to dreambox by internet explorer or dreamup(this used once if the current dreambox bootloader is ssl82 or older)
-Flash original image as usual
-Flash ssl-84 nfi to dreambox again and before rebooting the dreambox
This method may not apply to few images like latest releases of edg nemesis and oozoon and better to use already patched images with new ssl built in
To use sim2 patched images with new ssl 84
if the dreambox has old ssl 82 bootloader,flash new ssl-84 nfi first by internet explorer or dreamup then flash sim2 image
if new ssl84 already flashed to dreambox just flash the sim2 image by usual method
with the new ssl ,original drivers and most recent releases of plugins are working without modifications with exception of few plugins like webinterface and software manager may need to apply available specific patches.
To take backup for the flash image with integrated new ssl we advice to use TSFlashBackup v 2.0
To install and to make backup of barry allen multiboot image we advice to use sim2-barryallen v 2.0
Last edited:
DM800se sim2 84d bootloader
Sim2 released new boot loader for dm800se!
ssl84d contains a fix for OpenPli 3.0/4.0 images so no kernel modification is needed in order to make the drivers working in OpenPli.
The rest stays the same for dmm based images, TPM removal still needed!
The new boot-loader used only with original dreammultimedia drivers 01102013.
Attached nfi and bin format for the loader.
Thanks fly out to the Sim2-Team for their continuous support for all sim products !
Thx Bassie for uploading
Sim2 released new boot loader for dm800se!
ssl84d contains a fix for OpenPli 3.0/4.0 images so no kernel modification is needed in order to make the drivers working in OpenPli.
The rest stays the same for dmm based images, TPM removal still needed!
The new boot-loader used only with original dreammultimedia drivers 01102013.
Attached nfi and bin format for the loader.
Thanks fly out to the Sim2-Team for their continuous support for all sim products !
Thx Bassie for uploading
- Status
- Not open for further replies.