Can't update - vu duo2

adapter6

Registered
Messages
8
Hi.
Last couple days i try to update via USB. I tried 4 different pendrives (2 of them i was using for earlier updates). No matter what USB port i plug in update not starting. I tried NTFS,Fat,Fat32. I tried blackhole, openvix openspa, pure2 no matter what update, it wont start.

I unpluged internal HDD, lan everything what i could disconect. What else i can do ? RS232 ?

Firmware 3.0.8.C

Build: 2019-04-17-master

Kernel 3.13.5

Thank You
 

isteric2005

Registered
Messages
12
There are no bugs in the BH image that does not allow updating.
So it's easy to think you have something .....
The USB stick must be formatted in fat32 ..... and then unzipped the image inside ..... write me after these steps which folders you see in the USB stick before inserting it in your receiver
 

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,480
So i take it you have no other USB drive plugged in ?

Does the image on your box now still Boot ?

Does the front display show that it is reading the USB ?
 

adapter6

Registered
Messages
8
unpluged everything. yes 3.0.8C working. When i put usb on screen - no files to be displayed appear
 

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,480
You can not flash from withing the image.

Turn the power off at the plug.

Put the usb stick in the front of your duo2.

Now power back on at the plug.

Front display on the duo2 should show its reading the usb format and then proceed to flashing the image.
 

adapter6

Registered
Messages
8
omg 10year old pendrive 1GB update started. Thats terrible. buy box to pretend any ESP damage :)
 

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,480
Ive a similar issue with my duo 2 mate, it only likes smaller none usb3 drives.

Anyway pleased your sorted.
 
Top