How to USB flash the Octagon SF8008

World-of-Satellite

Board Sponsor
Messages
229
1) Download latest Enigma2 Image of your choice.
2) USB 2.0or 3.0 minimum 2 GB USB stick formatted with FAT32.
3) Unpack the image and copy BOTH the 'octagon' folder and the 'usb_update.bin' to root of the USB stick.
4) Turn off the box.
5) Plug the USB stick into the USB 3.0 port on the right side.
6) Press and hold the standby button and power on the box until "Updt" is displayed.
6) Select "Recovery From USB" from TV screen menu.
7) Box restarts when update is completed.
 

T50

Donating Member
Messages
230
does this receiver support webinterface flash like dmm? it's enigma2 so i suppose so, but i am not sure.
 

T50

Donating Member
Messages
230
i understand. with which default image this receiver comes from factory? openATV?.
Just another question, is the webinterface manageable through the browser,like any other e2 receiver?
 

paul68

Senior Member
Messages
107
i understand. with which default image this receiver comes from factory? openATV?.
Just another question, is the webinterface manageable through the browser,like any other e2 receiver?

Hi T50
Yes OpenA Tv is the base, after you can upload with other image and skin.

Yes ,certainly, Webinterface is manageable with web browser.

Bye Paul
 

abunaser

Registered
Messages
2
sf8008 stopped on boot

good morning my sirs

i faced an big problem with my set

i flashed as normal ( octagon and usb-update.bin )

but machine not started still as died ..

please guide me to flash it through an repaire image

thanks alot.
 
Top