Azbox HD Manuals

"CCcamInfoPHP from linux"


Most people use Windows on the PC and for that reason, perhaps, find it easier to monitor our programillas deco (at least in my case has been so).
Many of you wear the CCcamInfoPHP x.xx to view information of our peers, clients, servers, hops and much more, right now they are not. I am still very Novatillo.
Well as I was saying, the CCcamInfoPHP, is but a set of "web pages" and a small web server, which starts on your computer to start the programilla.
After putting the IP of Deco, the user, the pass and the port, out all this information.

For linux, I have found the program as is, but we can use it equally.
Here:
1 installed on your PC with linux phpMyAdmin is a small web server, sql and php, which exists for both Windows and Linux.
From a terminal type:
: / # Sudo apt-get install phpmyadmin
Once descargadi / installed, they will ask the configuration.

When you have installed, copy in / var / www folder "htdocs" (if we use the version of windows). This folder is in windows CCcamInfoPHP 1.5.

If we use the Linux version, which is on 4.0, got off this site and copy it into / var / www

Then from the browser type:
http://localhost/htdocs (windows)
http://localhost/cccamlinux (for example, if you have that name to the folder)

Remember that you must change the privileges of the folders copieis to read / write, so you can edit the config.php

PS: When you can put links to each SO CCcamInfoPHP

Gracias a Segarra

Manual Básico Maz V2.2

Gracias a Fundidun y a moser

:thum:

Guida Hardware AZBox Premium HD

version italia

Gracias a Arci

OSCam for Azbox HD How To

Take this Download, rename the file to oscam, make a folder in Multicas named oscam and put the File in it, give Rights 755

Then you need the config Files, put them all to the Folder oscam, its now ready to start, but you need Port and a Newcamd Line to your Client.
Conf is for 093b, if you need 0919 you must change all 093b to 0919 in configs.
Port in Config is used 24000, so you must make a NewCamd Line for your prefered Client with this Port(Mbox,CCcam or Mgcamd).
In Oscam.server you need an entry with your Boxkey like 01234567889
Think about unixeditor for changes
Maybe for your USB reader you must play with protocol, smargo works with intern.

Oscam must be placed at very first entry in receivermenue in Plugins, after that your prefered Client.
Openxcas.conf is in also and should work.
Logfiles are in tmp, but you can change this easy to console in config if you need this

And please, some Feedback would be great!

Ill hope you enjoy it and you will tell if working in this Thread, thanks a lot

At last : ITS NOT FOR INTERNAL READER IN AZBOX!!! NOT WORKING! YOU NEED EXTERNAL READER LIKE SMARGO+
IF SOMEONE HAS A PN WITH SOURCE FOR INTERNAL READER IT COULD BE INTEGRATED

Gracias a colla

Manual configurar multicas+cccam+newcs

Gracias a oscar_fl

Manual setup for sharing Lsdcs + cccam Irdeto cards

pdf in Spanish

Gracias a oscar_fl

Definitive Guide to share files with Windows 7

spanish pdf

Gracias a txemax

Manual streaming AZBOX HD (see image on the PC)​

Well time is something I've been researching and currently it works but not all channels ........... hopefully improvements

MATERIAL REQUIRED:

1 .- Computer Program for the VLC Media Player (free and for any operating system)

download here: http://www.videolan.org/vlc/

2 .- File Streaming AZbox.m3u "

Download attachment


I will tell you that there are many channels that does not work if this is not why they are under the influence of any EMU or rather I tend to be problems of codecs

I've tried and I've worked with:

BBC word
All Channels JSC SPORT
GOL TV channel

The thing as I would try and work with some and not others, but hopefully it will settle and work with all channels

Keep in mind several things also:

only works with Firmware 0.9.4283 and later as with the previous no streaming option on the menu decoder

Enabling streaming decoder makes a temporary file on your hard drive or usb ............ that's why premium users with internal hard drive should have no problems but for users of elite is essential to have gotten by usb hard disk drive or a pend, but not work


MANUAL STREAMING AZBOX HD

1 .- To enable the transfer is necessary if you are tuned to the channel with which we want to do streaming, activate the function menu on the remote

2 .- We will be out on the screen and down select "Streaming"

3 .- At the "streaming" does not touch anything, leave it as is this one and we modify the term "not defined" and press start (see how the deco brand logo as if we were recording with red LED on)

4 .- ....... go now to the PC after having installed the VLC Media Player on your PC with the mouse right button pulsais on file AZbox.m3u Streaming "and You select" open with .... . VLC "and give you the image on the PC .....

While you are viewing the image on the PC podreis change channels on the decoder long as you are in the same transponder

Otherwise if you change to a channel with another transponder on streaming interruptin

You can also interrupting the streaming coming back into the menu and deselect

Remember that time does not work with all channels and hopefully in future work with all

Saludos desde Sevilla


Mil gracias a magnoman

How to debian on AZbox

Connect to you azbox with telnet.

go to your usb/hdd onto the azbox.

DO:

create a debian folder


then go in this directory


then you have to get the debian file.

you can download it


now unpack the package


now we have to install the package.

Installing the package is very slow (40 minutes approx)

you can exit the debian interface with the exit command


you can enter it with


fist you have to setup your network access
we gonna use the program vi to edit the file


press 'i' for editing

insert your routers ip

to save press escape then type

test internet connection with

then update your distribution

if you get an error with


note down the pubkey


then use this commands
you have to replace the pubkey with your own key!


keep on repeating this command until you get no more errors then use


for testing purpose you can test CCcam.
download CCcam to your hard drive

unpack it and then put CCcam.mipsel to your /tmp folder

in my case

then chmod the file

chmod 755 CCcam.mipsel

for the CCcam.cfg you have to create the directory /var/etc

go to debian /var/ directory.

then create the directory.


then you can ftp the CCcam.cfg to this dir.


now for a test


to start CCcam


you can check if its running on


to access debian thru a webinterface.

install webmin 1.48

first install necessary software


then download the webmin package

go to /tmp folder


download the package


installeer a new packet.


then you can access it thru the browser

[/B]


Edit:
To have idea of files can be install take a look to reepo:
h**p://ipkg.medialounge.ru/azbox/unstable/

Add some pictures.


have fun!!

Thanks to the RussianMafia


Some Notes:

If you use Elite
change:
/DATA/hdb1 to /DATA/usb1/sdb1
or
/DATA/hdb1 to /DATA/usb2/sdb1

To start Debian:

Premium:

On console type:
cd /DATA/hdb1/debian/
chroot debian/ /bin/bash

or

chroot /DATA/hdb1/debian/debian/ /bin/bash

Elite with HDD on USB2

On console type:
chroot /DATA/usb1/sdb1/debian/debian/ /bin/bash
or
chroot /DATA/usb2/sdb1/debian/debian/ /bin/bash

DEV Notes: The must important on this is: Compiling Plugins, Gui's, Emu's You name it inside the box, will give this to a new stage.
I already ask on Azbox Forum for compiled version of GNU GCC.

Mil gracias a single

by magnoman original in spanish lenguaje

MANUAL
Mbox 04 + newcs + CCcam 2.1.1 + multicast
AZBOX HD ​

Well guys here I bring this combination of EMUS linked with its corresponding manual for AZBOX up and running in HD.


Let's see how this combination:


Newcs - Read the LOCAL (if you have it) and is shared by both Mbox 04 and CCcam 2.1.1.

Mbox 04 - This is the MBox version 0.4 (build 0023r3) Multi ECMs and linked with CCcam 2.1.1, which passed the cards to Mbox cccam, but that if adding a distance.

CCcam 2.1.1. - This is version 2.1.1 cccam. Makes Server / Client and linked with multicast (multicast client mode CCcam) (adding a distance) and get the Mbox cards (adding a distance).

multicast - This is the version 1.61C-A15a, the EMU is that used for viewing in the AZBOX HD CCcam client does (adding a distance), but client can do other external servers (Max 16).


INSTALLATION:


For the installation we will use any FTP program like DCC or MAZ.


In the download are two folders and a file, we will see the installation paths and attributes:


Folder "lib" - This is the folder that contains the Ccama and all its configuration files (CCcam.cfg, CCcam.prio, etc ... ... ..) less "dvbapiCAS.

You need only configure the CCcam.cfg with your data and lines, other data are already configured.

PATH - This folder must get her into the path "/ plugins".

attribute - must be given attributes 755 to the folder and all files inside this folder.


Folder"OpenXCAS" - This is the folder that contains almost all the EMUS (Newcs, MBox 0.4, multicast) minus CCcam even if it takes the "dvbapiCAS" of cccam.


You have to configure the Newcs, MBox 0.4, multicast with your data and lines.

PATH - This folder must get her into the path "/ plugins".

attribute - must be given attributes 755 to the folder "OpenXCAS" and the files inside this folder:

module.seq --------- 755
----- openxcas.conf-755


Inside the folder "OpenXCAS" are folders and now we will also detail the attributes of these folders and files that are inside these folders:



Folder "dvbapiCAS" - must be given attributes 755 to the folder "dvbapiCAS" yya these files inside this folder:

dvbapi.sh--------- 755
_ # # 755 ------ dvbapi_module


Folder "MboxCAS" - must be given attributes 755 to the folder "MboxCAS" and these files that are inside this folder:

mbox.sh--------- 755
mbox_module1 ------ 755
----- openxcas.conf-755



Folder "Multicar" - must be given attributes 755 to the folder "Multicar" and 755 to all files inside this folder.



Folder "NewCS" - must be given attributes 755 to the folder "NewCS" and these files that are inside this folder:

newcs --------- 755



File "S10UserDefinedShell" - This is the file containing the startup script of EMUS, makes some of them started in the background and so only make Reshare, with this script you're all set on the way to start the emus and do not touch anything in the file "module.seq" that must be left as this only brings Newcs activated and conf.

PATH - This file needs to be thrown in the path "/ DISK2/etc/stard.d", overwriting the one that comes in the receiver.

attribute - In file "S10UserDefinedShell" attributes must be given 755.


NOTE - obviously you must configure the EMUS with your configuration files (CCcam.cfg, CCcam.prio, mbox.cfg, cwshare.cfg, etc ... .... .) with your configuration (host, port, user, pass, lines, etc ... ....) and Newcs with the settings in your local (Box *** N3 R180 and RSA and RSA or Freeview Box K*Y Futbolera or which is ... ... ..)

Note2 - In the discharge and within files (CCcam.cfg of cccam and multicast, cwshare.cfg Mbox), you have practical examples to make all the lines that link the EMUS, which will guide you to make links with your data.


MANUAL MADE BY MAGNOMAN , with the invaluable and indispensable help of RUSOALICIA (ERES UN CRACK) AND IDEAS FORUM azboxhd.es DRAWN IN THE TIME THAT LEADS INSTALLED IN MY PREMIUM, Behaves VERY STABLE, I HOPE YOU KINDLY HELP TO MANY


GREETINGS FROM SEVILLA

Mil gracias a magnoman