TM5402 mk3 / Intelsat 907 @ 27.5

Tel2413

Registered
Messages
18
Hi can someone help, I'm trying to get uk channels on Intelsat 907, I'm using the latest TM 5402 sat box , a 1.4 mtre dish and a universal LNB from Almeria area Spain. I assume I'm on the correct sat as I'm picking up 11402v18.351, 11429v25.721, 11507v2.894 as well as 6 other frequencies from Intelsat 907 all with great reception but just cannot get the one I want 114895v44100, I don't know what I'm doing wrong, I've spent hours going through threads as well as days moving the dish and LNB but still nothing, can anyone help PLEASE
 

Tel2413

Registered
Messages
18
TM5402HD/intelsat907

Thank you for your reply but have used a dish pointer to finder the location and a v8 sat finder and it says I'm on Intelsat 907 and when I do a blind scan on the TM all the channels I receive come from Intelsat 907 but not the frequency I want, so I don't know what I'm doing wrong.
 

manic01

Super VIP
Messages
2,494
Believe me when i tell you, you are on 15 west.
11429 v 25721 channels are jim jam extreme sports etc
11402v18.351 channels are amc history sundance etc
11507v2.894 channels are EXRN radio network etc

Just because you are set up on the receiver for 27w for scanning that does not mean you are pointing at it.
You will get the same results/channels if you change satellite to 30w and scan as its its a fixed dish, you need to move the dish!

You are def on 15 west as those frequencies you have posted are from that satellite only.
 
Last edited:

manic01

Super VIP
Messages
2,494
Let me know how you get on once you have moved over to 27w.
When you are looking at the dish from the front you need to move it to your left and also elevation needs changing to 41 so probably needs changing a bit as 15 west elevation is 46
Also lnb will need rotating clockwise about 27 degrees
 
Last edited:

Tel2413

Registered
Messages
18
TM5402 HD mk3/Intelsat 907

Thank you so much for your help , yes your right , I moved the dish as you said and hey presto I have my uk channels. Once again thank you
 

Tel2413

Registered
Messages
18
TM5402/Intelsat 907

I still have one small problem, although I now have the uk channels , channel 5 won't load up, it keeps saying scrambled . I have loaded the latest phantom patch 147p and have also tried to manually put the channel in and patch it, when I do this it say no video or audio. If this is a problem with all the TM boxes then I can live with it but was hoping there was a fix, many thanks in advance
 

william-1

Feed Hunter
Messages
4,371
I still have one small problem, although I now have the uk channels , channel 5 won't load up, it keeps saying scrambled . I have loaded the latest phantom patch 147p and have also tried to manually put the channel in and patch it, when I do this it say no video or audio. If this is a problem with all the TM boxes then I can live with it but was hoping there was a fix, many thanks in advance



Technomate Add Channels TM5402 HD
Satellite: 27.5W INTELSAT 907
Transponder: [1] 11.495 GHz
Channel Name: Channel 5 HD
Channel Type: TV
Video PID: 6401
Audio PID: 6402
PCR PID 6401
Video Type: H.264
Audio Type: MPEG4

Now go to the Biss section to activate.
 

Tel2413

Registered
Messages
18
Thank you for your reply , did what you said then went to BISS key highlited the first BISS key , did exit but channel 5 just said no video or audio , maybe I have the wrong batch, I have the latest c+ TM and am using what ithoughtwas the best patch 147p.
 

Tel2413

Registered
Messages
18
TM5402 mk3/intelsat907

Thanks, reset to factory settings uploaded phantom patch 146p ,manually put in channel5 then did BISS key but still no channel5, looks like I'll have to live without it, thanks anyway
 

Tel2413

Registered
Messages
18
Tm5402/intelsat907

Thanks, have done that, do you think a new LNB would solve the problem as the old one I'm using must be over 10 years old
 

lespat

Registered
Messages
12
Don't know if this is the problem, but when I use to add a new channel on my TM 5402/2, I had to go into the BISS keys and change a key (any one of the letter or number for the same to activate the "save" function) before the keys would save & channel would open. The channel you are trying to open has to be selected before editing/saving key.
Can't imagine why all other channels would work and channel 5 not when they are all on the same transponder, ruling out the LNB?
 
Last edited:

Tel2413

Registered
Messages
18
tm5402 hd mk3/intelsat907

thank you, just done that downloaded williams channel update for tm5402 mk3 dated 5thJUNE 2014 , when it finished loading and i tried to get any channel it just kept saying directing to THOR whoever THOR is so i had to go to factory settings and start again, told you i am not very good at this haha and all i want is channel 5 to load
 
Last edited:

manic01

Super VIP
Messages
2,494
thank you, just done that downloaded williams channel update for tm5402 mk3 dated 5thJUNE 2014 , when it finished loading and i tried to get any channel it just kept saying directing to THOR whoever THOR is so i had to go to factory settings and start again, told you i am not very good at this haha and all i want is channel 5 to load
Use this list, and select 27 West with sat button.
https://www.sat-universe.com/showthread.php?t=270378&page=8&highlight=Technomate
 

manic01

Super VIP
Messages
2,494
Or manually add it then do 8280 for the keys allocation. Restart receiver to get keys to work.

Not sure why feed scan is not working. Why not delete Ch5 then rescan with feed scan on.

Satellite: 27.5W INTELSAT 907
Transponder: [1] 11.495
Channel Name: Channel 5 HD
Channel Type: TV
Video PID: 6401
Audio PID: 6402
PCR PID (PPID): 6401
Video Type: H.264
Audio Type: MPEG4
 
Last edited:
Top