Original Firmware Clarke-Tech 5100 HD/C Plus

M

marce

VIP
Messages
7,115
Original Firmware Version 1.01


Code: 
New Features:

• Supports Dolby Digital Plus Image 1 / Image 2
• Recording with subtitles Figure 3
• Recording of 2 channels simultaneously 4 / Picture 6
• While satellite channel is being recorded, can simultaneously terrestrial channels
be considered. Or vice versa. Figure 5
• 3 channels can be simultaneously decoded, add 2 transmitters,
another look at Figure 5 Channel
• Timeshift 60 minutes Figure 7
• Note: For direct admission and stations with EPG data, the recording ends

Regard
After installing version 1.01, no older firmware s / w installed version werden.Das also applies to the subsequent versions.
Reason is that the new firmware for reducing the size even more compressed.
Because of this compression, installed with the new firmware, while a new boot version.
In addition, changes with the new firmware, the structure of channel memory, user settings and host files. Old attitudes and recordings can still be used, but the new data can not be used for older firmware versions!!

Clarke-Tech 5100 HD Model
 
K

kargo.25

Super VIP
Messages
9,725
Code: 
Changelog-Version 2.05

folgende Probleme gelöst
- Sky Deutschland > Multifeed Optionstaste/Unterkanäle
- Einstellung HDMI-Dolby speichern
- Audiospurwechsel bei Senderwechsel
- falsche Startzeit über Timer
- nach Ende der Timeraufnahme zurückgehen in Standby Modus
- Blindscan, Frequenzbereich einstellen

folgende Probleme in Arbeit /
- DVB-T/DTT- Entschlüssselung von Cam/ CI Modul (Samsungcam,Engel Cam GolTv Spanien)
- Mehre Aufnahme zur gleichen Zeit über Timer/EPG starten . Zur Zeit nur bei direkter Aufnahme.
- Motor Einstellung Limit
- Kindersicherung über Receiver oder CI Modul

neue hinzugefügte Funktionen (Details im Pdf-Dokument)
- Schnittfunktion
- EPG/Timer Aufnahme Offset
- Timeshift 120 Minuten unterstützt über HDD
- Timeshift permanet > unterstützt über HDD
- Bootmenu
- Zeitsprünge im Abspielen mit Seite Taste Auf/Ab

Betreffend EPG Timer Aufnahme:
Das nachfolgende Programmieren von Sendern darf nicht innerhalb der ersten Aufnahmezeit liegen. Im Augenblick Überschneidungen nicht möglich!!
 
Last edited:
B

bozomustafa_68

Registered
Messages
16,935
CTECH5100C 104p


* Release note *

Solved:

Slovenian menu

Dynamic PMT A/V PID switching

Reboot by enter Disk Manager

Timer function

Added:
In menu "Front Display settings" > Standby mode " set "normal" or "power saving" power saving = deep standby mode

Note:
SamsungCam DTT/DVB-T support coming soon !
--------------------------------------------------------------------------------
Folgende Probleme gefixt:

Slowenisches Menü

Dynamische PMT, A/V PID Umschaltung, bei zum Sendern mit Regionalfenster

Reboot bei öffnen des Disk Manager Menüs

Timerfunktion

Hinzugefügt:
Im Menü "Front Display settings" > Standby mode " Einstellung "normal" oder "power saving" power saving = Deep Standby Modus

THARED CLOS ;)
 
Last edited:
E

elgeneral

Registered
Messages
7,811
Firmware 1.09 CT5100C +


release note [ver 1.09]

fixed:

-. Recording

-. 2nd recording problem fixed. (may be fixed last time)

-. HD video record problem fixed.

-. AC3 audio recording problem fixed.

-. VFD displaying umlauts

features

-. added forwards / rearward speed 16x 32x

-. MHW EPG NL

-. Fastcan Canal Digitaal choose between SD and HD

-. added normal mode standby / power saved> in front display menu

Note:
Mediaset / SamsungCam DTT / DVB-T> solution is planned in 2 weeks!

Mediaset / SamsungCam DTT / DVB-T> soluzione è prevista in 2 settimane!
-------------------------------------------------- ----------------------------------

The following problems dealt with:

-. Admission

-. 2nd recording

-. Recording HD Channel

-. Recording with AC3

-. Umlauts in the front display

New:

-. Added> fast forward and back coils 16x, 32x

-. MHW EPG for NL

-. Fastscan extended for SD and HD

-. Added> in the front display menu> Standby mode Normal / power saved
 
F

francesco

VIP
Messages
543
Original Firmware Clarke-Tech 5100 HD/C 110
release note:



1.added support CI Modul by DVB-T/TDT/DTT

1. hinzugefügt CI Modul Unterstützung für DVB-T/TDT/DTT
 
K

kargo.25

Super VIP
Messages
9,725
Attention! New BOOTLOADER Ver. 4.50

1.Dynamic PMT fixed

2.Czech,French OSD language fixed

3.Timer recording fixed !Please, erase the file "TimerEventName.ten" which is on the harddisk !


4.CI module support expanded and improved

5.Recall button > recall history list.Now it is possible to see the list of latest watched channels
In menu OSD settings can set recall function on/off. In OFF mode the old recall function are back

6.Problems switching between different scrambled channels was solved

7.Problem with subtitles solved
 
Last edited:
F

francesco

VIP
Messages
543
Original Firmware Clarke-Tech 5100 HD

release note

fixed :

-. timeshift problem fixed)

features


-. added extra functions in Datatransfer (more Details coming soon)
 
K

kargo.25

Super VIP
Messages
9,725
Polnische Sprache hinzugefügt
- Blindscan MHz Schritte hinzugefügt
- Fastscan überarbeitet
- Einige Timerprobleme gefixt
- Automatische Format Umschaltung > V-Format AUTO
- A/V Einstellung Auswahl PAL/NTSC/AUTO hinzugefügt
- Untertitel überarbeitet
-----------------------------------------------------------
- Added Polish language
- Added MHz steps in Blindscan menu
- Fastscan fixed
- Fixed some timer issues
- Automatic format swichting > V-format AUTO
- Added selection PAL / NTSC / AUTO in A/V setting menu
- Subtitles revised
 
Last edited:
K

kargo.25

Super VIP
Messages
9,725
- timer revised
- added Online Service > Google MAP & Weather
- media files change aspect ratio with Aspect button
- chip manufacturer driver update
- added internet radio
- menu Games renamed in Entertainment
 
Last edited:
B

bozomustafa_68

Registered
Messages
16,935
HD5100C ver. 1.48 - 1.17 14-10-2011

Code: 
- added in AV settings Dutch subtitles 

- some fixes in timer recording

- last used EPG mode stored

- "Das Erste HD" subtitle fixed

- added to choose Channel in Channellist > in "Group" > SAT/Favorite selection

note:  in Disk Manager menu > auto timeshift coming back soon as possible
 
B

bozomustafa_68

Registered
Messages
16,935
C-Tech 5100Combo 1.50 Original

Code: 
- OSD/Playback > fixed
------------------------------------------------------------------
- OSD/Wiedergabe > behoben
 
K

kargo.25

Super VIP
Messages
9,725
C-Tech 5100 Full HD 1.23 Original

31.08.2012 C-Tech 5100Combo 1.51 Original
The following has been revised. SatCR-. Timer recording sequence Mon. ~ Fri. -. USALS-. Subtitles-. preprogrammed channel list
 
B

bozomustafa_68

Registered
Messages
16,935
5_4_CTECH5100C_152 ORJ.
5_4_CTECH5100CPlus_124 ORJ.


Folgendes wurde überarbeitet:

-. DiSEqC Motor Steuerung

------------------------------------------

The following has been updated:

-. Diseqc motor fixed
 
You must log in or register to reply here.
Top