Backup Image for Vuo+Solo

fushkrujs

VIP
Messages
1,123
Official Image Backup @isayuksel Vu Solo 08.12.2011

Code:
Installation and initial settings::

First, download the latest version of the new image for usb installing cihazımıza: Vu + Solo USB Stick Installation Instructions for the picture

After the setup wizard after installing the software is encountered. At this stage, I just do the language selection. Other transactions without getting out of the wizard.
Quote:

Language Turkish is selected.

We check the network settings using.

Menu> Setup> System> Network section of the "Network hardware settings" kumandamızın come on "OK" button is pressed.
User Interface: yes
Use DHCP: yes

We take note of the IP address of the current settings section.

If the link I gave on the network setup problem can examine this topic: Vu + wired / wireless network setup and test procedure

I need to do some adjustments in order to install Channel List.

Menu => System => Customize section of the user experience, "expert" as a change. Yet at the same place;
(Menu => System => Customize section) Enable the use of multi-bouquet "yes" to change. Kumandamızın green button to save the changes (OK) is pressed.

Again, we can do with the channel setting, install, and the computer for other tasks "Webinterface" plug-in needs to create.

For this
Menu => Plugins => Green Key (Attachment Download) A is pressed.
Extension information indiriliyor.Lütfen wait ... Extensions into categories will be displayed after a period of warning.

Here, under the extensions section "Webinterface" plug-in point to the OK button is pressed kumandamızın. "Extensions-Webinterface" Do you want to download the plug-in? A message will come in the form. kumandamızın yes option while on the "OK" button is pressed.

"Practice is over" key to exit kumandamızın are going to see the text.

Now we can install Settingimizi Channel: 4 different methods to throw the Channel List (Contacts).

Quote:

VU + Plus HDTV Channel Setting on the setting of the current channel is loaded.
(November 14, 2011 4 Satellite: Turksat, Hotbird, Astra EutelsatW3 and 19.2) @ galaxy2002

Channel setting is sure to reboot after installing the device.

Menu> Setup> Satellite Configuration> Settings section came Tuner Tuner configuration.

Quote:

A tuner: (Simple) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °

Note: You will notice after installing the first channel tuner ayarlamızı have made our list. Thus, because of the possible names of different satellites, satellite broadcasts, which may be taken in setting, we have prevented errors.

Add-on (plugin) installs are doing:

We want to use the system of plugins and other add-ons are building the system. But first, "SoftwareManager" (Software Management) plugin from scratch.
Downloadable add-ons => systemplugins under the "SoftwareManager" kumandamızın come on "OK" button is pressed. "Systemplugins-softwaremanager" Do you want to download the plug-in? A message will come in the form. kumandamızın yes option while on the "OK" button is pressed.

"Practice is over" key to exit kumandamızın are going to see the text.

Us to establish this, more add-ons management (remove more options and add-ons) will provide the opportunity. In addition, there are also some of the features. For now I will not discuss them.

Quote:

İndirlebilir add-ons => systemplugins under the "SoftwareManager" was established.


Menu => Add-ons section when we will begin to realize Changeable. Red button (Manage Add-ons) will Changeable first attracted our attention. Add-on with setting up and removing the key from the dropdown menu will no longer red.


Menu => Add-ons come to the section Kumandamızın Red button (Add-ons) is pressed. Updating the software catalog for a while after their stay at the screen a message that the system will be a list of plugins into categories. When you press the OK button on your remote control, point to the categories of any plug-ins will be listed in that category. Fainter ones installed plugins are installed here. You want to install (or you want to remove), add-ons by checking the set up here (or remove).

We are under the System category "StartUpService" i, under the direction of the image "videmode" select plug-ins. With red button (back), she next to red button (Close) are going. "Add-on Management activity information" window, choose plug-in (s) will be seen. In the meantime, we press the OK button kumandamızın installation (or removal) will start. Install (or uninstall) after the end of the process to restart istemedğimiz tamamalandığı and a window will pop up on the question. "Yes" by pressing the OK button on the Kumandamızın while providing our device to restart.



Because when we started again we set up our device with plug-in power-videomode connection settings will be related to the shape and resolution.

Quote:

HDMI is selected.
1080i was chosen

Image configuration.

Quote:

Menu> Setup> System> Audio / Video settings section to come
4:3 content is as follows: Just Scale
> 16:9 content is as follows: Just Scale
changed to. Green Key (OK), with the changes noted.


Quote:

Under the System category, hotplug,
PermanentClock under the System category,
PositionerSetup under the System category,
Satfinder under the System category,
Setpassd under the System category,
VideoEnckancment under the System category,
VlcPlayer under the Software category,
Autoresolution under the category of multi-media,
MyTube under the Multimedia category, was founded.


Quote:

Time zone: (GMT +02:00) Athens, Istanbul, Minsk
set as the startup service: Channel D

Whenever you install plugins as external. Ipk file via ftp / tmp directory, take, then give the following command telnet device to restart and finally enough.

Code:
ipkg install / tmp / *. ipk
Quote:

turkuazpanel_0.3.2_mipsel.ipk established.

Quote:

Nstreamplayer was 0.3 plugin.

Quote:

enigma2-plugin-systemplugins-bouquetsprotection_0.1_all.ipk established

Quote:

ShowClock established. exit, press the key long-term.

Quote:

BitrateWiewer established.

Quote:

Sherlock was 5.0.

Quote:

enigma2-skin-hdglass16_3.91_mipsel.ipk established.

Quote:

enigma2-plugin-extensions-enhancedmoviecenter_3.0.0_all.ipk established.

Quote:

enigma2-plugin-glasssysutil_4.03_mipsel.ipk established.

Quote:

tunisiasat-addons-manager_3.0 was downloaded.

Quote:

enigma2-plugin-usb2ram-1.5beta.ipk established.

Enigma2 plugin extensions are not included in Backupda appletrailer mipsel.ipk 0.1 plug-in as described above, download and build it. Must have on your hdd for this extension to work. During the installation of the folders is the hdd. This is caused by ftp with the / tmp directory after sending telnette ipkg install / tmp / *. ipk to be established by executing the command.

Emu are doing the installation:

Note: Emu setup was easier than the glasssysutil. In this case, you need to do CCcam.cfg file / etc directory under the server by entering the edit information.

CCcam 2.2.1 Backupda glass was selected as active.

After pressing the Blue button to change the list of the add-on Emu Glass-UnivCam emuları Manager section, select the other active can come.

CCcam.cfg enter a file server

Quote:

CCcam 2.2.1 was
Mgcamd was 1:38.

key establishment and key update installer we also deal with:

Hacksat-keys-downloader-e2_1.1-30102010_mipsel.rar download the update, do k.ey.
To set up Hacksat telnette
Code:
Export MALLOC_CHECK_ = 0
ipkg install-force-overwrite / tmp / Hacksat *
give the command.

Kurulumlarımızı our config and do the other.

I gave the following link if you want to change the threads by taking advantage of funding bootlogo and radio:

Vu + bootlogo replacement program, use of ready-bootlogolar ...

If you want to download picon file. Türksat_Hotbird_Astra19_Eutelsatw3 picon file download, download folder, remove zipten / usr/share/enigma2 / directory should be submitted under. There is no Backupta.


Settings and add-ons installed, then take the backup: VU + 'ta Duo & Solo USB and backup at NFI

In accordance with the above description is taken from the backup file present for Solo Vu:

After the installation proceed as follows:

Be using empty after formatting it as fat32 a usb cihazımıza takıyoruz our memory.

getimg.php


Menu> Add-Ins section of the USB plug-in RAM memory as we come on.

getimg.php


In the menu that Active meat option while on the Kumandamızın OK key is pressed.

getimg.php


RAM will be formatted and ready to use that memory for the USB yenşden. USB our memory anymore. Similar

getimg.php


Menu> Add-ons> Add-ons (red button) come to the section. network under the WebBrowser point to plug Kumandamızın OK key is pressed. After pressing the red button twice to set the OK key is pressed.

getimg.php


We expect to complete the installation.

getimg.php


We provide our device a reboot after installation.

getimg.php


menu> Add-ons kumandamızın WebBrowser, point to the OK button is pressed.

getimg.php


In this section we do not control use a Changeable. If you use a keyboard mouse
Mouse USB Mouse
Keyboard USB Keyboard options, select the green button is pressed Kumandamızın.

getimg.php


Ready to use the WebBrowser.

getimg.php



We use the virtual keyboard key for the kumandamızın yellow.


navigation are good looking and good.



Download

Thanks isayuksel
 

fushkrujs

VIP
Messages
1,123
BlackHole Vu+ Solo 1.6.7 beta2 backup @isayuksel

Code:
BlackHole Vu + Solo 1.6.7 beta2 backup @ isayuksel

Installation and initial settings::

First, download the latest version of the new image for usb installing cihazımıza: Vu + Solo USB Stick Installation Instructions for the picture

After installation to be done after the installation settings:: (2) Vu + Duo initial setup settings

Quote:

Seçilidi HDMI.
1080i is selected.
Language Turkish is selected.
DHCP on the network.

Where You can call this channel channel list or we can install ready. If you want to call channel tuner settings before you have to do.

To search for detailed information about the channel: (4) Vu + Duo channel search and bookmark create

We check the network settings using.

Menu> Setup> System> Network section of the "Network hardware settings" kumandamızın come on "OK" button is pressed.

Under the section for the current settings to take note of the IP address. (Channel settings will need to install me in the value of the rope.)

If the link I gave on the network setup problem can examine this topic: Vu + wired / wireless network setup and test procedure

Now we can install Settingimizi Channel: 4 different methods to throw the Channel List (Contacts).

Quote:

December 12, 2011 4 Satellite: Turksat, Hotbird, Astra 19.2 and EutelsatW3. @ Kayacan

Channel setting is sure to reboot after installing the device.

Menu> Setup> Satellite Configuration> Settings section came Tuner Tuner configuration.

Quote:

A tuner: (Simple) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °

Note: You will notice after installing the first channel tuner ayarlamızı have made our list. Thus, because of the possible names of different satellites, satellite broadcasts, which may be taken in setting, we have prevented errors.

Add-on (plugin) installs are doing:

Menu => Add-ons come to the section Kumandamızın Red button (Add-ons) is pressed. Updating the software catalog for a while after their stay at the screen a message that the system will be a list of plugins into categories. When you press the OK button on your remote control, point to the categories of any plug-ins will be listed in that category. Here you set up off olanalar ekelentilerdir installed. You want to install (or you want to remove), add-ons by checking the set up here (or remove).

Quote:

Add-on manager;
PermanentClock under the System category,
Setpasswd under the System category (the password is assigned),
StartUpService under the System category (Channel D),
VlcPlayer under the Software category,
SimpleRSS under the category of Multi-media (not active),
VirtualZap under the category of Multi-media (press and hold the arrow key),
Multi-media category was established under the Weatheer Plugin.

Install (or uninstall) after the end of the process to restart istemedğimiz tamamalandığı and a window will pop up on the question. "Yes" by pressing the OK button on the Kumandamızın while providing our device to restart.

In line with our desire to do other simple config for:

Quote:

Menu> Setup> System> Audio / Video settings
4:3 content is as follows: Just Scale
> 16:9 content is as follows: Just after the green key to Scale (OK) acknowledge.
Menu> Setup> System> Time zone: (GMT +02:00) Athens, Istanbul, Minsk
After setting up the Green Key (OK) We acknowledge with.
Menu> Setup> System> Customize section of the user's experience as an expert in changing the Green Key (OK) We acknowledge with.

Determination of the initial channel:

Quote:

Channel List, while the point of the channel you want to begin the startup.

Press the Menu key.

The drop-down options, press the OK button on your remote control set-point as the stratup service.

When you restart your device to open the channel you want.

If you want to cancel this process so if you want the latest on what channel you turned off the opening of the channel;

While the Channel List, press the Menu key.

Service options in the drop-down option on startup, reset, press the OK button on your remote control to come.

Quote:


set as the startup service: Channel D

We can install some plugins that are not BH Panel Addons Manager add-on manager. For this purpose;

Press the green and yellow, respectively Kumandamızın BH Addons Manager and select the rear panel, we come back. Here, while the kumandamızın Addons Download Manager by pressing OK on the pop-up is in Chapter Black Hole Image Plugins can be loaded by pressing the OK button on the plug-ins arrive kumandamızın. While we want to establish a plug-in on this too, and then the OK button is pressed kumandamızın. Brief explanations about the plugin will display the info. Here, the green button (Download) to whether we want to do with the download and installation information about the problem buşlunduğu kumandamızın on the screen, yes, press OK to carry out the installation.


Quote:

DreamExplorer 7.3, Enhanced Movie Center v3.0.0, v4.2 Sherlock WebMedia was 5.0.

As described above, you can install the Apple Trailer v1.0 addons Mangere. This extension is not Backupta. Must have on your hdd for this extension to work. During the installation of the folders is the hdd. This causes the addons panel or the / tmp directory needs to be established.

Whenever you install plugins as external. Ipk file via ftp / tmp directory on your remote control before you roll the green, then yellow and then drop-down menu, press the "Manual Install Ipk packges" on your remote control, point to the "OK" button. You will see that you want to install the ipk file. Kumandamızın was selected even though the "OK" button you can install.

Quote:

Turkuazpanel_0.3.3_mipsel.ipk established.

Quote:

Nstreamplayer was 0.3 plugin.

Quote:

enigma2-plugin-systemplugins-bouquetsprotection_0.1_all.ipk established

Quote:

ShowClock established. exit, press the key long-term.

Quote:

BitrateWiewer established.

Quote:

enigma2-plugin-extensions-subtitleplayer_3.10_mipsel.ipk established.

Quote:

r0_beta2 buyukbangpanel_1.1-founded.

Quote:

tunisiasat-addons-manager_3.0 was downloaded.

Our device after restarting;

Quote:

Menu => Plugins => tunisiasat come first as an e-addons-manager_3.0 livefootball (3.4b), and then the plugins tunisiasat "Netradioturk_2.6-b" + "Netraditurk satation 2.7", and finally under the CCcam Info plugin V1. 3c was

Emu are doing the installation:

E2_CCcam_2.3.0_bh.tgz download file such as / tmp folder, send the bottom. Black Hole in the Addons Manager (This section kumandamızın green and yellow to highlight the key is pressed), pointing to the Manual Install Bh packges kumandamızın We press the OK button. While on our file by pressing the OK button again kumandamızın and yes also on the menu, and select OK uşuna do the installation.

CCcam.cfg file / etc folder is located under the. Server uses this knowledge to the file server need not to enter.

CCcam 2.3.0 emu Backupda selected as active.

CCcam.cfg enter a file server

Mgcamd_1.37_E2_bh.tgz download file such as / tmp folder, send the bottom. Black Hole in the Addons Manager (This section kumandamızın green and yellow to highlight the key is pressed), pointing to the Manual Install Bh packges kumandamızın We press the OK button. While on our file by pressing the OK button again kumandamızın and yes also on the menu, and select OK uşuna do the installation.

N, O, and key update installer we also deal with the establishment of:

Hacksat-k e y-downloader-e2_1.1-30102010_mipsel.ipk file via ftp download / tmp folder after sending telnette;

Code:
Export MALLOC_CHECK_ = 0
ipkg install-force-overwrite / tmp / Hacksat *
give the command.
If the installation fails again, try to give the following command:

Code:
ipkg update
Once installed, the update of k ey are doing.

Kurulumlarımızı our config and do the other.

If you want to install the skin on your remote control before you press the green and then yellow. Black Hole Addons Manager> Addons Download Manager> Skins section of Black Hole E2 image can come in different skins.

Quote:

EleganceHDR_BH1.6x_VU_V2 interface is loaded. Is not active.

I gave the following link if you want to change the threads by taking advantage of funding bootlogo and radio:

Vu + bootlogo replacement program, use of ready-bootlogolar ...

Quote:

Değişrtirildi bootlogo and radio fund ...


If you want to download picon file. Current HD Picon Turksat-W3 (Licher Pils +) Download a copy of the subject picon. Remove the folder or folders that you downloaded zipten / usr/share/enigma2 / picon folder if you have placed in the directory, or create picon folder named after the file permission 755 should be submitted within this folder.

Quote:

Uploaded on Eutelsat Picon Turksat set.

Settings and add-ons installed, then take the backup: VU + 'ta Duo & Solo USB and backup at NFI

Enjoy

di-QLVOCHEV.jpg

di-G225.jpg

di-OG7C.jpg

di-WCJ6.jpg



Code:
Important Note:
Backup file before installing the update process, first you have to bootloder. This process also imajdan be installed prior to a one-off.

For this, solo_cfe_2.0_usb.zip  After removing the image loads, such as file download and install zipten onto the surface.

 Easy come.


Download
 

fushkrujs

VIP
Messages
1,123
Vti 4.0 backup @isayuksel Vu Solo

Code:
Neues VTi "Vu + Team Image" - V 4.0 Backup image of Vu solo @ isayuksel

First, download the latest version of the new image for usb installing cihazımıza: Vu + Solo USB Stick Installation Instructions for the picture

After installation to be done after the installation settings:: (2) Vu + Duo initial setup settings

Quote:

Seçilidi HDMI.
1080i is selected.
Language Turkish is selected.
DHCP on the network.

Where You can call this channel channel list or we can install ready.

(4) Vu + Duo channel search and bookmark create

4 different methods to throw the Channel List (Contacts).

Quote:

December 12, 2011 4 Satellite: Turksat, Hotbird, Astra 19.2 and EutelsatW3. @ Kayacan

Menu> Setup> Satellite Configuration> Settings section came Tuner Tuner configuration.

Quote:

A tuner: (Simple) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °

Menu => Add-ons section of the press came and Kumandamızın Green (Download Plug-ins) is pressed. "Plug-in information is being downloaded. Please wait ..." You will receive a message that says. On the screen after a while, "downloadable add-ons" will be listed in the categories. When you press the OK button on your remote control, point to the categories of any plug-ins will be listed in that category. Do you want to download any plug-in "..... When you select a plug-in? " A warning will come in the form of knowledge. Here, a "yes" is selected while still accommodating kumandamızın "OK" button to add the establishment can be downloaded. [/ B]

Quote:

Downloadable add-ons => extensions under the "bitrateviewer" was established
Downloadable add-ons => extensions under the "cccaminfo" was established.
Downloadable add-ons => extensions under the "enhancedmoviecenter" was established
Downloadable add-ons => extensions under the "MyTube" was established.
Downloadable add-ons => extensions under the "openwebif" was established.
Downloadable add-ons => extensions under the "permanentclock" was established.
Downloadable add-ons => extensions under the "pzyemail" was established.
Downloadable add-ons => extensions under the "sherlock-vuplus" was established.
Downloadable add-ons => extensions under the "showclock" was established. exit, press the key long-term.
Downloadable add-ons => extensions under the "simplerss" was established. Is not active.
Downloadable add-ons => extensions under the "virtualzap" was established.
Downloadable add-ons => extensions under the "vlcplayer" was established.
Downloadable add-ons => extensions under the "weatherplugin" was established. Istanbul is set up.
Downloadable add-ons => extensions under the "youtubeplayer" was established
Downloadable add-ons => systemplugins under the "positionersetup" was established.
Downloadable add-ons => systemplugins under the "Satfinder" was established.
Downloadable add-ons => systemplugins under the "setpsswd" was established. The password is assigned.
Downloadable add-ons => systemplugins under the "startupservice" was established. Channel D is set
Downloadable add-ons => cccam2.3.0 was established under the cams.
Downloadable add-ons => CCcam config was founded under.

I suggest you to restart your device after installing plug-ins.

Determination of the initial channel:

Quote:

Channel List, while the point of the channel you want to begin the startup.

Press the Menu key.

The drop-down options, press the OK button on your remote control set-point as the stratup service.

When you restart your device to open the channel you want.

If you want to cancel this process so if you want the latest on what channel you turned off the opening of the channel;

While the Channel List, press the Menu key.

Service options in the drop-down option on startup, reset, press the OK button on your remote control to come.


Quote:

Menu => Setup => System => Time Zone: (GMT +02:00) Athens, Istanbul, Minsk
set as the startup service: Channel D


Whenever you install plugins as external. Ipk file via ftp / tmp directory after a workout, press the blue drop-down menu on your remote control, point the installer manually. Install ipkg option, it can point to press the OK button on your remote control.

Quote:

Turkuazpanel_0.3.3_mipsel.ipk established.

Quote:

enigma2-plugin-extensions-dreamexplorer_7.3_mipsel.ipk established.

Quote:

Nstreamplayer was 0.3 plugin.

Quote:

enigma2-plugin-extensions-subtitleplayer_3.10_mipsel.ipk established.

Quote:

enigma2-plugin-systemplugins-bouquetsprotection_0.1_all.ipk established

Quote:

r0_beta2 buyukbangpanel_1.1-founded.

Quote:

tunisiasat-addons-manager_3.0 was downloaded.

Our device after restarting;

Quote:

Menu => Plugins => tunisiasat manager_3.0 e-addons-plugins-come first under the sport livefootball (3.4b) under the Plugins-multimedia "Netradioturk_2.6-b" was founded. netradioturk-stations_2.7 updated.

Emu are doing the installation:

CCcam 2.3.0 downloadable add-ons, has been established.

Note: CCcam.cfg file path / etc dir. Here editleyebilirsiniz information about the server.

1:37 Mgcamd setup:

Mgcamd_1_37.tar.gz file download / tmp folder are sending. By pressing the blue button Kumandamızın Table nu open VTI. We press the OK button, point to the installation manual kumandamızın here. . Tar.gz download kumandamızın the OK button is pressed again, come on. In this way we do our installation.

key establishment and key update installer we also deal with:

Quote:

Hacksat-keys-downloader-e2_1.1-30102010_mipsel.rar download the update, do k.ey.
To set up Hacksat telnette
Code:
Export MALLOC_CHECK_ = 0
ipkg install-force-overwrite / tmp / Hacksat *
give the command.

Kurulumlarımızı our config and do the other.

I gave the following link if you want to change the threads by taking advantage of funding bootlogo and radio:

Vu + bootlogo replacement program, use of ready-bootlogolar ...

If you want to download picon file. Türksat_Hotbird_Astra19_Eutelsatw3 picon file download, download folder, remove zipten / usr/share/enigma2 placed in the directory should be submitted.

Quote:

Picon Turksat Eutelsat w3 sets installed.

You can try different skins according to your request: VU + Duo Twin Linux HDTV Skin Archive


Quote:

enigma2-skin-hdglass16_4.01 interface is established.

If we want to upload the site by installing any Backup dosyamızı open sharing.

di-H8YT.jpg

di-NZC4YJ2K.jpg

di-YFR8.jpg

di-20AL.jpg

di-NGFS.jpg

di-XK7K.jpg

di-1FL4.jpg

di-I3DN.jpg

di-91QG.jpg

di-5IGR.jpg

di-2M4W.jpg

di-WD30.jpg


Important Note:

Backup file before installing the first (if you have not done before installation) bootloder need to update the process. This process also imajdan be installed prior to a one-off.

After removing the image to download and install zipten solo_cfe_2.0_usb.zip file for this, such as making the installation process.

Easy come.


Download
 

fushkrujs

VIP
Messages
1,123
Vix 2.3 backup @isayuksel Vu Solo (Linux 3.1.1)

Code:
VIX 2.3 (Linux 3.1.1) Wu solo Image Backup @ isayuksel

Installation and initial settings::

First, download the latest version of the new image for usb installing cihazımıza: Vu + Solo USB Stick Installation Instructions for the picture

After installation to be done after the installation settings:: (2) Vu + Duo initial setup settings

Quote:

Seçilidi HDMI.
1080i is selected.
Language Turkish is selected.
DHCP on the network.

Where You can call this channel channel list or we can install ready. If you want to call channel tuner settings before you have to do.

For this review the following topic: (4) Vu + Duo channel search and bookmark create

We check the network settings using.

Menu> Setup> System> Network section of the "Network hardware settings" kumandamızın come on "OK" button is pressed.

Under the section for the current settings to take note of the IP address. (Channel settings will need to install me in the value of the rope.)

If the link I gave on the network setup problem can examine this topic: Vu + wired / wireless network setup and test procedure

4 different methods to throw the Channel List (Contacts).

Quote:

VU + Plus HDTV Channel Setting on the setting of the current channel is loaded.
(December 26, 2011 4 Satellite: Turksat, Hotbird, Astra EutelsatW3 and 19.2) was added to the EPG bouquet @ galaxy2002

Channel setting is sure to reboot after installing the device.

Menu> Setup> Satellite Configuration> Settings section came Tuner Tuner configuration.

Quote:

A tuner: (Simple) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °

Note: You will notice after installing the first channel tuner ayarlamızı have made our list. Thus, because of the possible names of different satellites, satellite broadcasts, which may be taken in setting, we have prevented errors.

Add-on (plugin) installs are doing:

Menu => Plugins => Green Key (Attachment Download) A is pressed.
Extension information indiriliyor.Lütfen wait ... Extensions into categories will be displayed after a period of warning.

Quote:

Downloadable add-ons => under systemplugins Autoresolution,
Downloadable add-ons => under systemplugins setpasswd,
Downloadable add-ons => dreamexplorer under extensions (7.3),
Downloadable add-ons => MyTube under extensions,
Downloadable add-ons => permanentclock under extensions,
Downloadable add-ons => sherlock-vuplus under extensions (5.01) help button, the
Downloadable add-ons => extensions showclock under the long-term exit, press the key,
Downloadable add-ons => simplerss under extensions,
Downloadable add-ons => vlcplayer under extensions,
Downloadable add-ons => weatherplugin under extensions,
Downloadable add-ons => webinterfaceold under extensions,
Downloadable add-ons => youtubeplayer established under extensions.

Whenever you install plugins as external. Ipk file via ftp / tmp directory after a workout
Menu> Setup> VIX> IPK after seeing the file selected in Installer, but when we want to come to Kumandamızın OK button (or pressing the green button kumandamızdaki) by pressing the yes on the question while we do the installation by pressing the OK button kumandamızın.

Quote:

turkuazpanel_0.3.4_mipsel.ipk established.

Quote:

Nstreamplayer was 0.3 plugin.

Quote:

enigma2-plugin-extensions-subtitleplayer_3.10_mipsel.ipk established.

Quote:

enigma2-plugin-systemplugins-bouquetsprotection_0.1_all.ipk established

Quote:

file was edited on nStreamPlayer. @ Dursundursun

Quote:

Buyukbang panel v.1.1 beta 2 is established. (@ Exenonline)

Quote:

enigma2-plugin-extensions-enhancedmoviecenter_3.0.0_all.ipk established.

Quote:

enigma2-plugin-extensions-webmedia_4.2-r0_mipsel.ipk established.

Quote:

enigma2-plugin-extensions-pauli_7.5_all.ipk established. left / right keys on the channel - / + was appointed

Quote:

tunisiasat-addons-manager_3.0 was downloaded.

Our device after restarting;

Quote:

Menu => Plugins => tunisiasat manager_3.0 e-addons-plugins-come first under the sport livefootball (3.4b) under the Plugins-multimedia "Netradioturk_2.6-b" was founded

Quote:

Time Settings: (GMT +02:00) Athens, Istanbul, Minsk
Using Sync time: Transponder Time
set-up service is started: Channel D

Emu are doing the installation:

CCcam 2.3.0,
Mgcamd 1:37 and
MgCamd1.38 established manually.

CCcam.cfg file / etc folder is located. This file server uses the knowledge required not to enter.

key establishment and key update installer we also deal with:

Quote:

Hacksat-keys-downloader-e2_1.1-30102010_mipsel.rar download the update, do k.ey.
To set up Hacksat telnette
Code:
Export MALLOC_CHECK_ = 0
ipkg install-force-overwrite / tmp / Hacksat *
give the command.

Prepared in accordance with the above description for the backup link I give Vu + Solo. Who want to download and install and inspect:

Important Note:

Backup file before installing the first (if you have not done before installation) bootloder need to update the process. This process also imajdan be installed prior to a one-off.

After removing the image to download and install zipten solo_cfe_2.0_usb.zip file for this, such as making the installation process.

Easy come.

di-S52T3QWT.jpg

di-F37X.jpg

di-7T7JR3MS.jpg

di-O6WW.jpg

di-D674VQYZ.jpg

di-JMR2.jpg

di-XGE5.jpg

di-L3KG.jpg

di-UJWE.jpg



Download
 

fushkrujs

VIP
Messages
1,123
Code:
Turkuaz Team Mod Pli (05.01.2012) Vu+ Solo

First of all, the latest version of the Pli Official Site of the new image to usb from the download and installing cihazımıza: Vu + Solo USB Stick Installation Instructions for the picture

After installation to be done after the installation settings::


Quote:

Seçilidi HDMI.
1080i is selected.
Language Turkish is selected.

Where You can call this channel channel list or we can install ready.

To search for detailed information about the channel: (4) Vu + Duo channel search and bookmark create

We need to establish Webinterface to install any plug-in Channel List. For this

Menu => Add-ons section of the press came and Kumandamızın Green (Add-on Download) is pressed. Downloading add-in information ... please wait ... A message on the screen in the form of a period of time after their stay will be a list of system plugins into categories. When you press the OK button on your remote control, point to the categories of any plug-ins will be listed in that category. Here you find the extensions under the category of plug-in webinterface_old kumandamızın on the OK button is pressed while.

Cihazımızı re-launching plug-in order to be effective.

We check the network settings using.

Menu> Setup> System> Network section of the "Network hardware settings" kumandamızın come on "OK" button is pressed.

Under the section for the current settings to take note of the IP address. (Channel settings when loading the editor need not to enter the value of the rope.)

If the link I gave on the network setup problem can examine this topic: Vu + wired / wireless network setup and test procedure

Now we can install Settingimizi Channel: 4 different methods to throw the Channel List (Contacts).

Quote:

VU + Plus HDTV Channel Setting on the setting of the current channel is loaded.
(December 26, 2011 4 Satellite: Turksat, Hotbird, Astra EutelsatW3 and 19.2)
@ Galaxy2002

Channel setting is sure to reboot after installing the device.

Menu> Setup> Satellite Configuration> Settings section came Tuner Tuner configuration.

Quote:

A tuner: (Simple) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °

Note: You will notice after installing the first channel tuner ayarlamızı have made our list. Thus, because of the possible names of different satellites, satellite broadcasts, which may be taken in setting, we have prevented errors.

Quote:

Menu> Setup> System> Audio / Video settings section to come
4:3 content is as follows: Just Scale
> 16:9 content is as follows: Just Scale
changed to. Green Key (OK), with the changes noted.

Quote:

Time zone: (GMT +02:00) Athens, Istanbul, Minsk

Determination of the initial channel:

Quote:

Channel List, while the point of the channel you want to begin the startup.

Press the Menu key.

The drop-down options, press the OK button on your remote control set-point as the stratup service.

When you restart your device to open the channel you want.

If you want to cancel this process so if you want the latest on what channel you turned off the opening of the channel;

While the Channel List, press the Menu key.

Service as the startup option to stop using the drop-down options, press the OK button on your remote control point.

Quote:


set as the startup service: Channel D

Add-on (plugin) installs are doing:

Menu => Add-ons section of the press came and Kumandamızın Green (Add-on Download) is pressed. Downloading add-in information ... please wait ... A message on the screen in the form of a period of time after their stay will be a list of system plugins into categories. When you press the OK button on your remote control, point to the categories of any plug-ins will be listed in that category.

Quote:

Add-on manager;
under systemplugins Autoresolution,
under systemplugins Setpasswd (Password is assigned),
under systemplugins videoenchancement,
backupsuite under the category of extensions (8.2),
bitrateviewer under the category of extensions,
under the category of extensions cccaminfo
under the category of extensions dreamexplorer 7.3,
permanentclock under the category of extensions,
sherlock under the category of extensions (5.1) (help press),
under the category of extensions showclock (exit, press the key long-term),
simplerss under the category of extensions (supply address has been entered),
under the category of extensions virtualzap
under the category of extensions vlcplayer
under the category of extensions weatherplugin
under the category of extensions youtubeplayer
established under softcams ccam 2.3.0.

Whenever you install plugins as external. Ipk file / files via ftp / tmp directory after a workout telnette give the following command:
Code:
opkg install / tmp / *. ipk
Quote:

turkuazpanel_0.3.5_mipsel.ipk established.

Quote:

enigma2-plugin-extensions-subtitleplayer_3.10_mipsel.ipk established.

Quote:

enigma2-plugin-systemplugins-bouquetsprotection_0.1_all.ipk established

Quote:

Buyukbang panel v.1.1 beta 2 is established. (@ Exenonline)

Quote:

enigma2-plugin-extensions-webmedia_4.2-r0_mipsel.ipk established.

Quote:

enigma2-plugin-extensions-enhancedmoviecenter_3.0.0_all.ipk established.

Quote:

tunisiasat-addons-manager_3.0 was downloaded.

Our device after restarting;

Quote:

Menu => Plugins => tunisiasat-addons-manager_3.0 E-sport came under the first olarakPlugins livefootball (3.4b) under the Plugins-multimedia "Netradioturk_2.6-b" + "Netraditurk satation 2.7" was

Emu are doing the installation:

Emu downloadable add-ons were setup.

CCcam.cfg file / etc folder is located under the. Server uses this knowledge to the file server need not to enter.

CCcam.cfg enter a file server

key establishment and key update installer we also deal with:

Hacksat-k e y-downloader-e2_1.1-30102010_mipsel.ipk file via ftp download / tmp folder after sending telnette;
Code:
Export MALLOC_CHECK_ = 0
opkg install-force-overwrite / tmp / Hacksat *
give the command.

Kurulumlarımızı our config and do the other.

If we want to install the interface as described in Attachment installations can be done.

I gave the following link if you want to change the threads by taking advantage of funding bootlogo and radio:

Vu + bootlogo replacement program, use of ready-bootlogolar ...

Quote:

Bootlogo and changed the radio fund.


If you want to download picon file. Current HD Picon Turksat-W3 (Licher Pils +) Download a copy of the subject picon. Remove the folder or folders that you downloaded zipten / usr/share/enigma2 / picon folder if you have placed in the directory, or create picon folder named after the file permission 755 should be submitted within this folder.

Quote:

Uploaded on Türksat picon file ..


Prepared in accordance with the above description for the backup link I give Vu + Solo. Who want to download and install and inspect:



Enjoy ...

di-YBWH.jpg

di-70V4.jpg

di-I8J3.jpg

di-03DZUY9F.jpg

di-Q6FC.jpg

di-LYCG.jpg

di-344T.jpg

di-7WA2.jpg

di-M12N.jpg

di-1OF9.jpg



Download
 

fushkrujs

VIP
Messages
1,123
Turkuaz Team Mod Official 11.01.2012 Vu+ Solo

Code:
Installation and initial settings::

First, download the latest version of the new image for usb installing cihazımıza: Vu + Solo USB Stick Installation Instructions for the picture

After the setup wizard after installing the software is encountered. At this stage, I just do the language selection. Other transactions without getting out of the wizard.
Quote:

Language Turkish is selected.

We check the network settings using.

Menu> Setup> System> Network section of the "Network hardware settings" kumandamızın come on "OK" button is pressed.
User Interface: yes
Use DHCP: yes

We take note of the IP address of the current settings section.

If the link I gave on the network setup problem can examine this topic: Vu + wired / wireless network setup and test procedure

I need to do some adjustments in order to install Channel List.

Menu => System => Customize section of the user experience, "expert" as a change. Yet at the same place;
(Menu => System => Customize section) Enable the use of multi-bouquet "yes" to change. Kumandamızın green button to save the changes (OK) is pressed.

Again, we can do with the channel setting, install, and the computer for other tasks "Webinterface" plug-in needs to create.

For this
Menu => Plugins => Green Key (Attachment Download) A is pressed.
Extension information indiriliyor.Lütfen wait ... Extensions into categories will be displayed after a period of warning.

Here, under the extensions section "Webinterface" plug-in point to the OK button is pressed kumandamızın. "Extensions-Webinterface" Do you want to download the plug-in? A message will come in the form. kumandamızın yes option while on the "OK" button is pressed.

"Practice is over" key to exit kumandamızın are going to see the text.

Now we can install Settingimizi Channel: 4 different methods to throw the Channel List (Contacts).

Quote:

Backupda Channel List TurkuazPanel 'loaded from.

Quote:

VU + Plus HDTV Channel Setting on the setting of the current channel is loaded.
(January 10, 2012 4 Satellite: Turksat, Hotbird, Astra EutelsatW3 and 19.2)
@ Galaxy2002

Menu> Setup> Satellite Configuration> Settings section came Tuner Tuner configuration.

Quote:

A tuner: (Simple) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °


Note: You will notice after installing the first channel tuner ayarlamızı have made our list. Thus, because of the possible names of different satellites, satellite broadcasts, which may be taken in setting, we have prevented errors.

Add-on (plugin) installs are doing:

We want to use the system of plugins and other add-ons are building the system. But first, "SoftwareManager" (Software Management) plugin from scratch.
Downloadable add-ons => systemplugins under the "SoftwareManager" kumandamızın come on "OK" button is pressed. "Systemplugins-softwaremanager" Do you want to download the plug-in? A message will come in the form. kumandamızın yes option while on the "OK" button is pressed.

"Practice is over" key to exit kumandamızın are going to see the text.

Us to establish this, more add-ons management (remove more options and add-ons) will provide the opportunity. In addition, there are also some of the features. For now I will not discuss them.

Quote:

İndirlebilir add-ons => systemplugins under the "SoftwareManager" was established.


Menu => Add-ons section when we will begin to realize Changeable. Red button (Manage Add-ons) will Changeable first attracted our attention. Add-on with setting up and removing the key from the dropdown menu will no longer red.


Menu => Add-ons come to the section Kumandamızın Red button (Add-ons) is pressed. Updating the software catalog for a while after their stay at the screen a message that the system will be a list of plugins into categories. When you press the OK button on your remote control, point to the categories of any plug-ins will be listed in that category. Fainter ones installed plugins are installed here. You want to install (or you want to remove), add-ons by checking the set up here (or remove).

We are under the System category "StartUpService" i, under the direction of the image "videmode" select plug-ins. With red button (back), she next to red button (Close) are going. "Add-on Management activity information" window, choose plug-in (s) will be seen. In the meantime, we press the OK button kumandamızın installation (or removal) will start. Install (or uninstall) after the end of the process to restart istemedğimiz tamamalandığı and a window will pop up on the question. "Yes" by pressing the OK button on the Kumandamızın while providing our device to restart.

Because when we started again we set up our device with plug-in power-videomode connection settings will be related to the shape and resolution.

Quote:

HDMI is selected.
1080i was chosen

Image configuration.

Quote:

Menu> Setup> System> Audio / Video settings section to come
4:3 content is as follows: Just Scale
> 16:9 content is as follows: Just Scale
changed to. Green Key (OK), with the changes noted.

Quote:

Under the System category, hotplug,
PermanentClock under the System category,
PositionerSetup under the System category,
Satfinder under the System category,
Setpasswd under the System category,
VideoEnckancment under the System category,
VlcPlayer under the Software category,
Autoresolution under the category of multi-media,
MyTube under the category of multi-media,
SimpleRSS under the category of multi-media,
VirtualZap under the category of multi-media,
WeatherPlugin under the category of multi-media,
Multi-media category was established under the YouTubePlayer

Quote:

Time zone: (GMT +02:00) Athens, Istanbul, Minsk
set as the startup service: Channel D

Whenever you install plugins as external. Ipk file via ftp / tmp directory, take, then give the following command telnet device to restart and finally enough.
Code:
ipkg install / tmp / *. ipk
Quote:

Important note: Copy and paste the command can Yıkarıdaki shape. In addition, there is no need to type the name of the plugin. "*. Ipk" refers to all the ipk files with the extension. Tmp folder, the file name without the file extension Dolaysısyla which allows you to install the ipk.

Quote:

turkuazpanel_0.4_mipsel.ipk established.

Quote:

enigma2-plugin-extensions-dreamexplorer_7.3_mipsel.ipk established.

Quote:

Nstreamplayer was 0.3 plugin.

Quote:

enigma2-plugin-extensions-subtitleplayer_3.10_mipsel.ipk established.

Quote:

enigma2-plugin-systemplugins-bouquetsprotection_0.1_all.ipk established

Quote:

ShowClock established. exit, press the key long-term.

Quote:

BitrateWiewer established.

Quote:

Sherlock was 5.0.

Quote:

Buyukbang panel v.1.1 beta 2 is established. (@ Exenonline)

Quote:

file was edited on nStreamPlayer. @ Dursundursun

Quote:

enigma2-skin-hdglass16_4_13_mipsel.ipk established.

Quote:

enigma2-plugin-extensions-enhancedmoviecenter_3.0.0_all.ipk established.

Quote:

enigma2-plugin-extensions-webmedia_4.2-r0_mipsel.ipk established.

Quote:

enigma2-plugin-glasssysutil_4.07_mipsel.ipk established.

Quote:

tunisiasat-addons-manager_3.0 was downloaded.

Our device after restarting;

Quote:

Menu => Plugins => tunisiasat-addons-manager_3.0 E-sport came under the first olarakPlugins livefootball (3.4b) under the Plugins-multimedia "Netradioturk_2.6-b" + "Netraditurk satation 2.7" and was CccamInfo

Enigma2 plugin extensions are not included in Backupda appletrailer mipsel.ipk 0.1 plug-in as described above, download and build it. Must have on your hdd for this extension to work. During the installation of the folders is the hdd. This is caused by ftp with the / tmp directory after sending telnette ipkg install / tmp / *. ipk to be established by executing the command.

Emu are doing the installation:

Note: Emu glasssysutil installation is made of.

Glass in the remotes UnivCam Manager (0) key you want to install other emuları.

In this case, you need to do CCcam.cfg file / etc directory under the server by entering the edit information.

CCcam 2.3.0
Mgcamd 1:37 and
Mgcamd was 1:38.

CCcam 2.3.0 emu Backupda appointed as active. After pressing the Blue button to change the list of the add-on Emu Glass-UnivCam emuları Manager section, select the other active can come.

CCcam.cfg enter a file server

key establishment and key update installer we also deal with:

Hacksat-k e y-downloader-e2_1.1-30102010_mipsel.ipk file via ftp download / tmp folder after sending telnette;

Code:
Export MALLOC_CHECK_ = 0
ipkg install-force-overwrite / tmp / Hacksat *
give the command.

Kurulumlarımızı our config and do the other.

I gave the following link if you want to change the threads by taking advantage of funding bootlogo and radio:

Vu + bootlogo replacement program, use of ready-bootlogolar ...

If you want to download picon file. Türksat_Hotbird_Astra19_Eutelsatw3 picon file download, download folder, remove zipten / usr/share/enigma2 / directory should be submitted under.

Quote:

Picon Turksat and Eutelsat W3 set is loaded


Settings and add-ons installed, then take the backup: VU + 'ta Duo & Solo USB and backup at NFI

Quote:

Turquoise Backup Panel are taken from.
Menu> Add-ons> Turquoise panel> Backup / Restore> Full Backup HDD / USB (Vu Plus series)> Full Backup HDD

Prepared in accordance with the above description for the backup link I give Vu + Solo. Who want to download and install and inspect:

TurkuazTeamMod_Official_11_01_2012_solo

After the installation can review the bookmarked links to the following:

Original acclaimed Mount Operations

di-YBWH.jpg

di-70V4.jpg

di-I26JE3V1.jpg

di-7OZ5BBSJ.jpg

di-19P2.jpg

di-96G0.jpg

di-C5G1.jpg

di-O938LZ9Y.jpg

di-MLZBOTDT.jpg

di-ZHZT.jpg

di-7U34.jpg

di-SIBA.jpg



Download
 

bellof

Registered
Messages
1,791
LSK NABILO TNT-SATready Backup BH 1.7.0 by Senns69 - VU+ SOLO


Ready setup Image for reading Cards TNT Sat by Oscam6253/CCcam2.1.3

BASEIMAGE:
Blackhole 1.7.0

Backup-Image comes along with IN MEMORY OF GOOD OLD TIMES BOOTLOGO nabilo2

http://imageshack.us/photo/my-images/854/bootlogo2.jpg/
Also newest Version of Giant Addons Pack 3.3 is installed!!!

It means that BH Blue Panel,Blue Panel of Gemini and VTI Panel is installed!
All 3 fully working!!
GAP is also a Collection of a lot usefull Plugins!!


BOOTLOGO:



INSTALLED SKINS:

Default Skin (MOOD by Army)


Elegance HD I


and DMConcinnity-HD-Mod(Comes along with the GAP)



Installed Cams:
Scam 3.60
GBox.net 802 (TNT Sat SD & HD,CW,IRD2,Nagra,Via and Seca Emu OK)
MGcamd 1.38 (CW,IRD2,Nagra,Via and Seca Emu OK)
CCcam 2.3.0 (CW,Nagra,Via and Seca Emu OK)
CCcam 2.1.3 (CW,Nagra,Via and Seca Emu OK)
OscamYmod18-T24 (TNT Sat SD & HD,CW,IRD2,Nagra and Via Emu OK)(you have to activate DVBAPI for that!!)

also following Combos are installed:

Oscam6253/Mgcamd 1.38
Oscam6253/CCcam 2.1.3
Oscam6253/CCcam 2.3.0 (ready Setup to read TNT Sat Card V3)



All Cams are installed on BH Base!!!


INSTALLED PLUGINS BY ME:


VLC Media Player
Movie 2K Streamer
Media Center
Media Player Deluxe
Porn Center
and Letter Box Zoom

AND ALL PLUGINS WHICH COMES WITH THE GIANT ADDONS PACK!!!
Simply to much to tell you all!
Watch the Pics!!!!



IF YOU PRESS LONG THE BLUE BUTTON YOU WILL FIND SOME MORE!!




THE SATANGELS KEYUPDATER IS ALSO INSTALLED YOU WILL FIND IT INTO THE GIANT PANEL!!




MAINCONFIGS:

SATSETTINGS: MINE (Diseqc A/B / Port A - 19,2°E; Port B - 13°E)

IP-ADRESS: 192.168.1.75
OSCAMWEBIF-PORT: 16002
OSCAMWEBIF-USER: admin
OSCAMWEBIF-PASS: oscam

CCCAMWEBIF-PORT: 16001
CCCAMWEBIF-USER: LSK
CCCAMWEBIF-PASS: LSK

LOGIN:
USER: root
PASS: vuplus


USB-IMAGE FULLY TESTED BY ME!!!!!!!!


BIG THX TO AGUDA FOR HIS BOOT- AND RADIO-LOGO(Jessica Alba 212)!!!!!!



DOWNLOAD
 

mario sat

Registered
Messages
130
Backup BlackHole 1.7.1 VU+ Solo

* New Boot logo and spinner
* massage for update config file or channels liste.
* make change on same button (ok = channles liste // esc = inof)
* add CCcam 2.2.1 & CCcam Info (release 1) & Mgcamd 1.3.8 (release 2)
* Update channels liste for Digital+ spain & jsc Sport to 22-01-2012
* add auto sender option for CCcam.cfg or newcamd.list and channels liste (juste put CCcam.cfg or/and channels folders renamed as E2 and restart

* Enjoy with planet tv sat
 
Last edited:

mario sat

Registered
Messages
130
Backup BlackHole 1.7.1 VU+ Solo

* New Boot logo
* make change on same button (ok = channles liste // esc = info)
* add CCcam 2.2.1 & CCcam Info
* Update channels liste for Canalsat to 07-02-2012
* add USB Install option for CCcam.cfg and channels liste (juste put CCcam.cfg or/and channels folders renamed as E2 and restart


 

ZYGA

Banned
Messages
2,123
VU+Solo BlackHole 1.7.2 by Lonas

VU+Solo BlackHole 1.7.2 by Lonas
Code:
* Kernel Kernel 3.1.1 # 1
 * Enigma2: 05-02-2012-vuplus_experimental.
 * Image: BlackHole 1.7.2 - Mod canvas. [Stable Release]
 * Webinterface Version Vu +.
 * Distro Version: 2.2.0 vuplus.
 * Plugins: Meoboot, Mitube CrossEPG factory and plugins
 * DTT Chipset Drivers: By default brings to Fly Green (A835) are installed from the blue panel.
 * Support Wireles
 * Default Adoons Blackhole.
 * Updated Mod canvas boot logos.
 * Bootlogo in respect of the work of the components of n
 * Installed some more useful than another in order to run the three emus.
 * Free translation Sleep / Restart Right.
 * Skin default blackhole.
 * Modified General image, deleted options and added new options.
 * Now you can update automatically from the software manager (menu image).
 * Added Socat three emulators to run properly.
 * Updated modules and drivers to latest version.
 * Installed Emus CCcam 2.1.3, MboX0.23.4R, SBox 0.0.4-8 # 2 Public.
 * Added scripts to start the emulators of different ways.
 * The Script [| Mbox | CCcam sbox] enables Check for CCcam Mbox and share for the card and read by sbox.
 * The Script [| CCcam | sbox mbox] allows View by CCcam, Mbox share for the card and read by sbox.
 * The Script [CCcam - sbox] allows for CCcam See, share and read by CCcam card for sbox.
 * The Script [CCcam] to view and share single and read by CCcam CCcam card for.
 * The Script [Mbox - sbox] allows for Mbox View and share and read the card by sbox
 * The Script [Mbox] to view and share for Mbox, does not read any card.
 * Can be added to each card as you want as many changes through links.
 * Schedule automatic functions to properly make the exchange cams.
 * Image Amended by tarps.
 * Configured the card image for Digital + White, if the providers want another change by your own.
 * Modified Terrestrial.xml for Spain
 * Added script which will start startscripts.sh everything you want from it.
 * Added the compiled script Borrafakes.sh cthulhufhtagn
 * Added Script cwsort.sh cthulhufhtagn fellow pro ordered land provider, followed by virtual
 * Added the compiled Borraoffs cthulhufhtagn
 * Added the compiled script waitpid0000.sh pinguino_rh
 * Added ntpdate function in all scripts to set the time without being connected to the antenna.
 * Added automatic restart cron daily at 04:00
 * Added cron auto power off (standby) every day at 04:15
 * Added cron to Free memory every day at 04:50
 * Added script sboxtest.sh that controls whether sbox falls at some point and automatically resets
 * Added automatic start of the sboxtest.sh on all scripts SBOX
 * Updated Ident.info and ignore.list to date 28/01/2012
 * Updated CCcam.providers to date 28/01/2012
 * Removed default skin and added BlackShadow3
 * Fixed minor problems with the NTupdate, now if you update the time and generates the log
 * Fixed issues found in the boot of different scripts in the image
 * Converted library that solves the time libgcc_s.so ECM (-nan) fix display CCCam 2.1.3 ****
 * Added patch for USB-TDT af9033.ko
 * Removed vuplus_HD skin to gain space in flash
 * Default Language Spanish on the facility
 * Relocated the Spanish language in second to the English
 * Modified the web interface by tarpaulins
 * Correction version picture puzzle that brings
 * Modified many more things that I can not remember
 
The TDT is detected only in the installation of this, so be sure to have you clicked on the USB before installing.


The wireles more of the same, be sure to have it stuck to install the image first.


The emulators controláis from the blue button, plugins on the green.


You no longer need several Mod canvas, with this you decide which Emu use, the use can not eliminate it without problems ....


Any questions concerning the image I beg you please do them in a new thread in one section of Vu + (Vu + images not one)


It can be installed in 2 ways, one is USB and the other is by vutil (DreamUp Vu +)


The Zip file format brings the two inside, USB and NFI

BEFORE INSTALLING THIS PICTURE, MAKE SURE YOU HAVE UPDATED THE BOOT FROM EAST: cfe_solo_2.0.zip

I forgot to eliminate blackhole crashlog, you may proceed to remove it from the directory: / usr/lib/enigma2/python/Plugins/SystemPlugins /

once inside you eliminate the directory named CrashReport and reiniciáis enigma2 this srive only to send an email to the creators of this image in case of errors, but in this case to be a mod does not have to reach them any error of this image that crazy again.
It can be used in different ways:


* [| Mbox | CCcam sbox] enables Check for CCcam Mbox and share for the card and read by sbox.
* [| CCcam | sbox mbox] allows View by CCcam, Mbox share for the card and read by sbox.
* [CCcam - sbox] allows for CCcam See, share and read by CCcam card for sbox.
* [CCcam] to view and share single and read by CCcam CCcam card for.
* [Mbox - sbox] allows for Mbox View and share and read the card for sbox.
* [Mbox] to view and share for Mbox does not read any card.


It does not take password

Code:
[B][URL="modlonas.com/index.php?action=downloadfile&filename=ModLonas03-Vu-Solo.zip&directory=Receptores%20Sat/Vu/Vu%20Solo/Firmwares&"]DOWNLOAD[/URL][/B]
 

aguda

Registered
Messages
2,879
Turkuaz Team Mod BlackPole 0.1.1 Vu+ solo

Code:
Installation and initial settings: we do:

First of all, the latest version of the new image to usb cihazımıza install all USB Uno Vu + how the image will be scored? (Contacts)

Settings: after installation to be done after installation: (2) initial installation settings Vu + Duo

Seçilidi HDMI.
1080i selected.
Language Turkish is selected.
DHCP on the network.
At this point you can call the channel list or channel can install ready. If you want to make the tuner settings before you have to do a channel scan.

For more information about how to channel call: (4) Create the favorite channel search and Vu + Duo

Network settings: in-house.

Menu> Setup> System> Network section of the "Network hardware settings" to come on the kumandamızın "OK" button pressed.

Under the section for the current settings to take note of the IP address. (Value not to enter this ip will need to install the channel setting.)

If the link I gave about the network setup problem can examine this topic: Vu + wired / wireless network setup and test procedure

Now you can install Settingimizi Channel: 4 different methods to throw the Channel List (Contacts).

TurkuazPanel Backupda Channel List from the installed.
VU + Plus the current channel setting on the HDTV Channel Setting is loaded.
(March 22, 2012 4 Satellite: Turksat, Hotbird, Astra EutelsatW3 and 19.2) were added in addition to the bouquet of the EPG. @ Galaxy2002
Be sure to reboot after installing the device to the channel setting.

Menu> Setup> Satellite Configuration> Settings section to come Tuner Tuner configuration.

Tuner A: (Basic) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °
Note: Notice that after installing before the tuner ayarlamızı made our list of channels. Thus, because of the possible names of different satellites, satellite broadcasts that can be taken in setting we have prevented errors.

Extension (plugin) We install:

Menu => Add-ons section to come Kumandamızın Green key (Download Plugin) are pressed. Extension information indiriliyor.Lütfen wait ... The system may display a message that says plugins into categories will be listed after their stay. When you press the OK button on your remote control, point to any category gelecektir.Kategorilerin in that category on the list of add-ons while you can see the contents by pressing OK. Here, too, when you press the OK button on your remote control you want to download the plug attachment point will receive a warning that you want, yes, while on the arrow button on your remote control to download and can be installed.

Downloadable add-ons section;
Autoresolution under systemplugins
setpasswd under systemplugins
videoenchancment under systemplugins
bitratewiever under extensions
permanentclock under extensions
showclock under extensions (press and hold key to exit.)
simplerss under extensions
virtualzap under extensions
VLCPlayer under extensions
YouTubePlayer under extensions
established ..
In line with other simple settings: do we want:

Menu> Setup> System> Audio / Video settings
Go to the content of 4:3 as follows: Just Scale
> 16:9 content is as follows: Just after the green key to making Scale (OK) acknowledge.
Menu> Setup> System> Time zone: (GMT +02:00) Athens, Istanbul, Minsk
After setting up the Green Key (OK) and acknowledge.
Initial determination of channel:

While the point of the channel you want to begin startup the Channel List.

Press the Menu key.

Service options in the drop-down set point as stratup press the OK button on your remote control.

Channel you want your device will restart.

If you want to cancel this process, ie if you want the latest on what channel you turned off the opening of the channel;

While the Channel List, press the Menu key.

Service as the startup option to stop using the drop-down options, press the OK button on your remote control point.

set as the startup service: Channel D
Want to install external plugins. Ipk file via ftp / tmp directory, throw, then give the following command, and finally to the device, simply restart telnet.
Code:
opkg install / tmp / *. ipk
Important note: Yıkarıdaki shape and you can copy and paste command is doing. In addition, there is no need to type the name of the plugin in. "*. Ipk" refers to all the ipk files with the extension. Tmp folder, the file name without the file extension Dolaysısyla which allows you to install the ipk.
Established Turkuazpanel_0.6.3_mipsel.ipk ..
Sherlock was 5.0. (Search Press)
MyTube_PLi.tar.gz file downloaded and / tmp directory after sending Turquoise Panel> Install (ipk / tar.gz)> tar.gz file upload> TMP was set using the tar.gz file upload option
enigma2-plugin-extensions-enhancedmoviecenter_3.0.0_all.ipk established.
enigma2-plugin-extensions-webmedia_5.0-r0_mipsel.ipk established.
V.1.2.1 Buyukbang Panel was established. (@ Exenonline)
enigma2-plugin-extensions-subtitleplayer_3.11_mipsel.ipk established.
Netradioturk_2.6-b was
Livefootball (3.5b) was established
Emu are doing the installation:

As E2_CCcam_2.3.0_bh.tgz file download / tmp folder, delivered below. Addons Manager at Black Pole (kumandamızın to come to this section, we press the green and yellow button) Manual Install Bh kumandamızın packges point we press the OK button. While on our file and press OK to re-kumandamızın uşuna press OK on the setup menu that are doing well, yes.

CCcam.cfg file / etc folder is located under. Server uses the knowledge of this must go to the file server.

Entering information in the file server Cccam.cfg

070 v4 Btkcam established manually. btkcam.cfg file / usr / k e y s are. Blink is not available. Need to add yourself.

K ey installer do the establishment and key updating procedures:

hacksat-k e y-downloader-e2_1.1-30102010_mipsel.ipk file via ftp download / tmp folder after sending telnette;

Code:
export MALLOC_CHECK_ = 0
opkg install-force-overwrite / tmp / hacksat *
We give the command.
If the installation fails again, try to give the following command:

Code:
opkg update
After installation, update k ey are doing.

Biss Keys loaded from the panel for the constant.cw Turquoise.

And other settings: kurulumlarımızı do.

If you want link given below and radio fund bootlogo change by taking advantage of threads:

Vu + Bootlogo replacement program, use, ready bootlogolar ...

If you want to download picon file. Current HD Picon Turksat-W3 (Licher Pils +) Download the file picon the subject. Unzip the downloaded folder or folders, remove the / usr/share/enigma2 / picon folder if you have placed in the directory, or create a folder called picon into this folder will need to send the file permission after making 755.

Eutelsat set Picon Turksat loaded.
After you install the backup settings and add-ons get: VU + 'ta get backup Duo & Solo USB and NFI

Turquoise Backup Panel are from.
Menu> Add-ons> Turquoise panel> Backup / Restore> Full Backup HDD / USB (Vu Plus series)> Full Backup HDD
Image for the customized according to the above description for the link I give Vu + Uno. Who want to download and install and inspect:

TurkuazTeamMod_BP_0_1_1_uno


Good luck.

di-CHRF.jpg

di-0JHC.jpg

di-STO1.jpg

di-GVBE.jpg

di-234M9DOW.jpg

di-ELIL.jpg

di-37O9B6H6.jpg

di-OTM91YOU.jpg

di-934H.jpg

di-NV4X.jpg

di-DQH0.jpg

di-MXQB.jpg




Download
 

aguda

Registered
Messages
2,879

Open AAF Red/Black Style With Oscam Picon Backup By Ten Below


logo.jpg



Oscam 6771 & CCcam 2.1.3
Configured For UK White Card!



Proflinux ddc style oscam web info
With All Uk Oscam Web Picons Included!


osinf.png




Includes

TS Panel 5.2
Cross Epg Downloader
Media Center
Valis Virtual Zap
Cool Tv Guide 5.62
Ecm As Nan Fix Applied


pick-1.jpg


epg-1.jpg


media.jpg


plugins.jpg


tspanel.jpg


aafpanel.jpg


panel1.jpg



Extra Skin Installed

Elegance HD

EleganceHD_P2_BH1.6x_VU_V1_bh.jpg


CCcam Info Username: root

Oscam Info Username: admin


All Passwords: linuxsat



Enjoy!

http://www.datafilehost.com/download-24499f7a.html
 

sat gr

VIP
Messages
2,382
SatDreamGr New Edition Image VU+ Solo

SatDreamGr New Edition Image VU+ Solo


- Το image αυτό είναι βασισμένο σε Enigma2 Openpli Edition

χαρακτηριστικά

Enigma: 20-05-2012.-
Plugins: New menu v4.2.-
Panel + , Ipk Installer , SatDreamGr Panel,SoftcamSetup.-
Διαθέτει Ελληνικό epg από την προσθήκη του malakudi στο openpli, όπως επίσης εγκαθιστώντας το crossepg και επιλέγοντας την πηγή του SatDreamGr.-
New Skin : GlamourHighWay SatDreamGr edition by mcelliot_g.-
New Bootlogo : SatDreamGr extreme edition by mcelliot_g.-
New spinner : SatDreamGr extreme edition by mcelliot_g.-
Προτείνεται στην flash του δεκτη, και σε multiboot.-

Boutons Remote Control ********>Ανάλογα με τους δεκτες.-
RED:Start Recording
GREEN:Extensions
YELLOW:Timeshift
BLUE:NewMenu



Not included: Softcams,Keys
Image pass
name : root
password:dreambox

Σας ευχαριστούμε.
Η ομάδα του SatDreamGR.

scaled.php


scaled.php


scaled.php


scaled.php


scaled.php


scaled.php


scaled.php



tunermenu.jpg


satfinder.jpg




sigpic230_2.gif

NFI



USB
 

zvonko67

Member
Messages
1,733
VuSOLO-BlackHole-1.7.7-BACKUP-05.09.2012-irFan62*


Prepared Backup today.

There are 14.Temmuz.2012 Backupta dated 4 Satellite Current Setting.

TURKSAT 42E
Hotbird 13E
EUTELSAT 07E
ASTRA 19


Backupa Turksat - Eutelsat 07 - Piconları installed.


In Emu CCcam-2.3.0 installed.


Plugins installed plug-ins are required. (See illustrations)


.
Bh9DB.jpg


kw5Hw.jpg


BpwZ4.jpg


6EgSg.jpg


QDcGO.jpg


1qWlt.jpg


LaVWo.jpg


SbsP1.jpg


bIoSM.jpg


g6N8U.jpg




Download


 

ZYGA

Banned
Messages
2,123
VU+ Solo BlackPole OE2 UK Ready Backup By Ten Below

VU+ Solo BlackPole OE2 UK Ready Backup
By Ten Below



Whats Included?
Blackpole OE2 Of 25/10/12

Cams:[/SIZOscam 7809/CCcam 2.13


Plugins
TS Panel 6.6
1Channel VOD Movie plugin
Cross EPG
Mytube

Settings
Catseye Full Motor E2 Settings 20/10/2012


MXHD2 Skin
Ecm Time Showing As Nan Fix Applied
Oscam Colour Button CSS


epg-8.jpg


cams-3.jpg


plugins-4.jpg


tspanel-1.jpg


1channel.jpg


os-1.png


All Image & Cam Passwords = linuxsat




Enjoy!

Code:
[url]http://przeklej.net/down/5073348962884025170281098219114117226e221fec69266edbd493c.html[/url]
 

sat gr

VIP
Messages
2,382
Black Hole 1.7.8 Greek backup image by Kalemis for Vu+ Solo

Black Hole 1.7.8 Greek backup image by Kalemis for Vu+ Solo


Bootlogos:

zeusc.jpg


5090451366x768hoplite.jpg


and some fotos from image

menujuz.jpg


plugin1.jpg


plugin2.jpg


plugin3.jpg


plugin4.jpg



Download link
 

bellof

Registered
Messages
1,791
VU+ Solo BlackHole 1.7.9 Backup
By Ten Below

bh179bl.jpg



Whats Included?

BlackHole 1.7.9

Cams:
Oscam Ymod V18 - T34 Build 0
CCcam 2.30


Plugins
TS Panel 6.7
1Channel VOD Movie plugin
Merlin Music Player


Settings
Catseye Full Motor E2 Settings 08/12/2012
(rescanned 12/12/12 )

Other
Ecm Time Showing As Nan Fix Applied
Oscam Carbon Blue Webinf CSS

oym.png



For the latest Oscam keys file i recommend using these

Code:

hxxp://keyfiles.minicat.tv/

Inside the download you will find 2 files named oscam.keys & constant.cw

FTP oscam keys to /etc/tuxbox/config

FTP constant.cw to /usr/keys/


Restart Oscam & enjoy!


All Image & Cam Passwords = linuxsat




Enjoy!

DOWNLOAD
 

emre_30

Registered
Messages
149
Neues VTi "Vu+solo Team Image" - v. 5.0.0 - OE 1.6 dimili21 backup 15.12.2012

Neues VTi "Vu+solo Team Image" - v. 5.0.0 - OE 1.6 dimili21 backup 15.12.2012
Türksat-Hotbird-Eutelsat->MDU4
Biss Plugin+ Cccam.2.3.0 yüklükdür.
Stabil çalışmakta son versiyondur.
Backup İndir
gxf5u.gif

https://hotfile.com/dl/184581092/2bac166/vuplus.rar.html
Görüntüler.....
Bootlogo


gxf8p.jpg

Backup Görüntüleri
gxfb1.jpg

gxfbh.jpg

gxfbw.jpg

gxfcc.jpg

gxfcy.jpg

gxfhm.jpg

gxfjb.jpg

gxfk4.jpg
 

ZYGA

Banned
Messages
2,123

Open AAF 2.0 UK Ready VU+Solo Backup By Ten Below

logo1-1_zps2378995f.jpg



Whats Included?

Open AAF 2.0 Of 05/02/2013


Cams:
Oscam latest AAF Nightly Build/CCcam 2.13
( Configured Together For UK White Card )

Latest Plugins

BBC iplayer
ITV Player
Cross EPG
Facebook Reader
Ice Films
Media Center
Web Media
Enhanced Movie Center
Cool TV Guide
Auto Bouquets

Other

Ecm Time Showing As Nan Fix Applied



EPG_zps6d8ccc1c.jpg


BAR_zps3413e763.jpg


WEB_zpsea81b18f.jpg


PLUGS_zpsa27a4d15.jpg


CAMS_zps9d849d08.jpg


INFO_zpsa315a285.jpg


All Image & Cam Passwords = linuxsat



Enjoy!
Code:
[url]http://przeklej.net/down/64581414622804717049775007849405114a7656cee867f884a098e82.html[/url]
 
Top