Firmware Openbox S9 HD

philippe146

Registered
Messages
55
Bin Openbox s9 solo Fta sat Americanos incluidos y soporte para Motor

Bin Openbox s9 solo Fta sat Americanos incluidos y soporte para Motor


Code:
Este es unn bin con los satelites y tps americanos ademas de soporte para Motor, para todos los canales libres que estan en HD dvbs-2 Y canales libres normales.

PHP:
http://www.4shared.com/file/5rrUQu_c/HDS2_SatHawk_Motor.html
 

planko

Registered
Messages
86
These 2 last firmwares are killing even original "clones" openbox s9, i received mine yesterday, upgraded to the march firmware version, could use cardsharing, configure sats, channels, but when i tried to chance the background picture it has showed me

YOUR BOX IS CLONE VERSION!!!!

I have compared my box PCB with a original and a clone version and mine is same as original. I think this firmware is not working well choosing which boxes kill.

Now i'm waiting for a solution, i already have trying the recovery cable with lots of fw versions and nothing, no image.

Just On > boot > --

Pls Try upgrade your box with PC/Laptop via RS232 and use this original firmware
Hope this usefull!
 
Last edited by a moderator:

Serjoga

Latvian satfat
Staff member
Moderator
Messages
6,069
New soft 1.08.94 from 03/23/2011

=========================================
History Release Note
=========================================


Common Problems 7101/7105/7110

1. T1 and T2 will appear in the list of services, invoked by the button Fav Single tuner model - fixed now Single tuner models only stayed icon T1

2. Fixed a bug of menu items USB power mode Stadby.

3. Added Portuguese language menu.

4. Changed french language translation OSD.

5. Changed Dutch translation for language OSD.

6. Fixed bug with hanging up the receiver when scanning specific transponders TP (12266 H 27500 Astra19).

7. Added a screen format mode Pan Scan 16:9

Openbox S6 and S9 (STi7105 and 7110)

1. Fixed a problem finding some TP from the satellite AsiaSat 3.

2. Fixed problem with displaying label WAIT OFF on the front panel display when recording in satndby.

3. Fixed bug in calculation of the time recording information.

4. Fixed problem with duplication of work Blindscan regime.

5. Fixed the problem of lack of control (hang) in Blindscan mode.

6. Added lists of U.S. satellites.
 

Serjoga

Latvian satfat
Staff member
Moderator
Messages
6,069
L53 Openbox S9 Multi-Satellite Channel List v4.20 - [02 April 2011]



This channel list is best used with either the latest official Firmware, or with the latest L53_MOD_Dump file.

---------------------------------------------------------------------------

Just remember to allow your common sense to prevail .... and to always download the L53 files from the source [**********], as we can not guarantee the authenticity of our files if downloaded from another location, and also take the time to read the instructions contained within the zip file, of course if any of the original files are missing, or any extra files included, then the file have obviously been tampered with, in one way or another, and should therefore obviously be avoided, and not installed.

Each of our zipped L53 Channel List files, will consist of the following 4 files only:
1 .. TP_PROG.dbs
2 .. Constant file
3 .. Replace file
4 .. Channel List Instructions file.


The genuine checksum value for the files will be posted in the following: Firmware and Channel list sections.

You should verify each zip before unzipping and installing the file, otherwise we can not guarantee it, as it may have been tampered with in one way or another, the MD5 option is to ensure your safety.

If the checksum value do not match the Zip file perfectly then you should delete it, and download the genuine file.
THERES NO LOGICAL REASON FOR REMOVING, EDITING OR INCLUDING ANY FILES TO THE ORIGINAL ZIP.

This is a multi-satellite channel list covering satellites from 30west to 45east.
It can also be used as a single satellite channel list, just click on the Zoom or SatList button and select the satellite you wish access from the satellite list.

Default Settings:
Channel list format: .dbs
Default Motor Setting: DisEqC 1.2.
Default LNB Setting: Universal [9750 - 10600]
Radio Channels: 0
Favorite Channels: 0

If used in an external channel editor, change extension from .dbs to .abs
once you have edited the channel list, change the extension back to .dbs
---------------------------------------------------------------------------

What's New:
Updated channels on various satellites including: 5w, 1w, 7e, 13e 16e, 21.5e & 28.2e.

I believe all the channels that caused rebooting problems, have now all been removed.

To optimize this list & receiver to it's full potential, you will require a full multi-sat coverage cline.

I have also decided to included the replace.list and constant.list in all future releases, only for those that may require them.
Of course if you already have them installed, then simply ignore them.
---------------------------------------------------------------------------

Please Note:
To avoid any possable conflicts, it is always wise to delete all channels from your receiver, before installing a new list. if you do not then you could possably encounter problems.
To remove all channels, click Menu -> Edit Channel -> Delete All

To install this channel list, simply transfer the unzipped channel list to a USB Stick, and then insert the USB Stick into the USB port, which is located on the rear of the receiver, then follow the instructions below.

Click Menu -> Tools -> Upgrade By USB, then in 'Upgrade Mode' select 'Misc Files'
then click on 'Select & Upgrade' and select OPTION 1 [TP_PROG] now click the OK button,
when you see a check mark or tick next to the TP_PROG, click the yellow button to install.
Once the file have been installed, reboot the receiver, once rebooted you can then click the Zoom or SatList button, and directly select any satellite from within the satellite data base list.
 

elgeneral

Registered
Messages
7,811
firmware 110404

CHDS2-11-04-04

Changelog:

- improve the cardsharing about DRE-CRYPT,
- PROBLEMS about rebooting of paid channels,
- add softcam(patch)!
 

elgeneral

Registered
Messages
7,811
firmware 110506

CHDS2-11-05-05

Changelog:

- Optimize "read smart card function" for example, Viaccess 4.0,*** 2.0 , I***** 2.0, Conax 5, Sega ( i.e.Mediaguard 3) Nagra 2 and so on
- Add "FTP function', you can upgrade your software and files by internet,
including software, system file, TP_PRO.dbs, Cccam.cfg, softcam and so on
- It adds some key files, and optimize "patch"
- It adds several luanguage, i.e. Persian and so on
- Bomb--Kill the clone
 

elgeneral

Registered
Messages
7,811
S9 HD Firmware Openbox 11/05/2011

CAREFUL WITH THIS FIRM !!!!!!

Based in the firm of 06/05/2011.

- Support reading cards for Thailand and Malaysia.

- Support for FTP tool

- Identification of the decoder to know if it's original or clone


Steps to identify the deco:


1 - Back up everything.
2 - Update with this firm
3 - Go into Menu / information utility and press (ok), press 8888.

Now we'll see the Chip-ID (identification number)

If one of the following is original:
Code:
 00D0
  00EA
  085B
  0D0C
  98A1
  98F2
  9CF4
  9D1A


If not, or if you have doubts, DO NOT upgrade the firmware, and reset 10 times that to stay "locked" the decoder

gracias al amigo Cirus
 

HackTheNet

Registered
Messages
71
CloneBox

MAIN FEATURES

1. Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
2. Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4
3. Digital Video Recorder through USB (external flash or hard drive are not included)
4. The most affordable FTA HD receiver on the market today.
5. Worldwide compatible
6. Hardware Blind Search DVB-S and DVB-S2 (fast search less than 2 Minutes on most satellites)
7. Linux MIPS Operating System
8. STB main IC solution is ALI , demodulator model is M3501 from Ali
9. HD DVB-S2 SHARP 7306 Tuner
10. Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech

The first thing to do is save the downloaded firmware file on a USB flash disk.
Plug USB disk to the back of your receiver. It will be recognized by the receiver.

1. Before upgrade, do a Factory Reset:

* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.

2. Upgrade Firmware:

* Click on MENU and go to TOOLS menu again
* Scroll down to "Upgrade by USB"
* Click on START
* After the loading is completed, Accept the upgrade.
* The receiver will restart.

3. After upgrade, do another Factory Reset:

* Go to TOOLS menu and click on Factory Settings
* Click Yes to continue. The receiver will go to factory default and restart.

****> Version vom 06/05/2011 ! <<<


The New Official China Firmware version do not include any channels.

Changelog: ?

DDL: http://www22.zippyshare.com/v/29196834/file.html
 

Serjoga

Latvian satfat
Staff member
Moderator
Messages
6,069
NewCamd List Usb Update - Openbox HD S9

NewCamd List Usb Update

Go to:

Menu;
Tools;
Upgrade by Usb;
Upgrade Mode-Misc Files;
Select&Upgrade(ok);
NewCamd.list(MGCamd Plug);
Yellow to upgrade
 
Last edited:

Serjoga

Latvian satfat
Staff member
Moderator
Messages
6,069
list dated 5/6/2011

Bouquets:
-DIGIT
-POLSAT
-N
-***
-XXX
-HD
-GERMANY

by MAX
 

Serjoga

Latvian satfat
Staff member
Moderator
Messages
6,069
Openbox S9 CONM_C2DS2_America.abs

The manufacturer says:
Openbox S9 ONM_C2DS2_America.abs


1.updated mediaplayer to support some video formats--VCD(MPEG1),DVD(MPEG2),AVC,MP4(H.264)
2.modified multi-cas read cards.and menu to disable EMM.
3.add Indonesia language
4.updated Slovak language,add Czech language
5.updated Russia language,add Persian language
6.modified some biss encrypt to decode biss channels
7.added C Band LNB local frequency:3620MHZ
8.added local time setting ---- bangkok/jakarta GMT+7 .
9.added patch to support softcam.key format.
10.modified some HD channels playing reboot problems
11.modified background connect to internet
12.add to 32 FAV list
13. Add HDMI and AV output at the same time
 

Edo2

Registered
Messages
3,111
New firmware 17/06/2011 Europese versie

main features are as follows:

1.updated mediaplayer to support some video formats--VCD(MPEG1),DVD(MPEG2),AVC,MP4(H.264)
2.modified multi-cas read cards.and menu to disable EMM.
3.add Indonesia language
4.updated Slovak language,add Czech language
5.updated Russia language,add Persian language
6.modified some biss encrypt to decode biss channels
7.added C Band LNB local frequency:3620MHZ
8.added local time setting ---- bangkok/jakarta GMT+7 .
9.added patch to support softcam.key format.
10.modified some HD channels playing reboot problems
11.modified background connect to internet
12.add to 32 FAV list
13. Add HDMI and AV output at the same time
 

Serjoga

Latvian satfat
Staff member
Moderator
Messages
6,069
New software from 09/01/20 17.06.2011 Openbox S9

Read more ...

The plugin is able to download from a Web server
Menu - Utilities - Plug-in: Blue Button - download
Server URL: Menu - Installation - Network Setup: Server Firmware Update
Multipicture mosaic Funtion bug, as amended (Blue button)
Blind Scan search wrong: Amended
Dubbed the channel or other errors in the blind scan Solved
CH sky portal problem: Solved
Hang up when they do 10 minutes pause playback file REC: Solved
Daily EPG write error: Solved
Work screen saver during playback Service Radio: Solved
Unable to delete a specific file Rec Bug (file name includes / or special characters): Solve
Unstable signal quality: Solved
Black background issue in the name of the event Information Banner: Solved
Record the names are stored as the old name of the event in case of a scheduled recording: Solved
Question hangs after a reset to factory defaults: Solved
Hangs on the menu Data Transmission: Solved
If you change the service up / down, the loop is maintained in a tuner: Supported
Logical channel number (LCN) function off: Amended
Audio noise click: Solved
Lost in the recording of descramble specific channels: Solved
I can not write to the service nemed in Turkish: Solved
Tools to find the option in the list of Service Manager: added (yellow button)
Spilit menu screen or broken: Solved
The screen turns to black and white mode, change the resolution: Resolved
Flickering screen and place in a Scart to edit mode, resolution: Resolved
2 hours before the screening time EPG DATA open EPG data stored on your hard disk: Solved



NOTE: YouTube and the Web browser pre-installed!
 

Edo2

Registered
Messages
3,111
Openbox S9 PVR Software-Azja-NEW

Openbox S9 PVR Software-Amerykańsko-NOWY

Openbox S9 PVR Software-Europa-NOWY
 

Benkurd

Registered
Messages
1,154
Firmware Openbox S9HD Europe 23/06/2011

Tested by me s*y Deutschland is working
B***** at 39 east working
C*Nl at 19.2 Working with new softcam will upload soon
All CRYPTOWORKS providers working

have fun

Benkurd
 
Top