Nabilosat-DM500S-Images

Status
Not open for further replies.

maximo

Super VIP
Messages
588
Cvs Nabilosat DM500s 20.12.06

- Enigma 20.12.2006
- GCC 3.4.4 Original CVS
- Web Interface: 5.9.7
- Busybox 1.0.1
- Linux version 2.6.9 (nabilosat-team@franzjuve) (gcc version 3.4.4)

- Pmt.tmp Patched

Bootlogo Nabilosat By MaXiMo II

language:
Deutsch
English
French
Italian

image only 4.1mb
thank you to franzjuve:thum:
DOWNLOAD
 

Pattyren

VIP
Messages
1,885
Nabilosat DM500 v. 0.6.1 Plus & MaxVar

Nabilosat DM500 v. 0.6.1 Plus & MaxVar

Great Image. Thanks to Nabilosat team

Here are two versions of Nablosat Image DM500 available
  1. Nabilosat DM500 v. 0.6.1 Plus
  2. Nabilosat DM500 v. 0.6.1 MaxVar
What is the difference between these two images?
1) Nabilosat DM500 Plus: is the most advanced Nabilosat Image. This version include Openvpn fully integrated in Enigma. If you use this image you don't need to intall openvpn plugin because Opevpn is fully included in this image.
2) Nabilosat DM 500 MaxVar: this version is compiled and optimized to have the maximum extra space in /var directory. This version doesn't include Openvpn. So if you don't want to use Openvpn this is your image. With this MaxVar version you have about of total 2.8 M space available on /var.
These are the only differences between these two versions all the rest is the same.

Warning: to install this image in flash Use ONLY DreamUP + serial cable and a complete flash erase.
Don't install this image in flash with flashwizard.

Technical Infos:
* Enigma of: 28.3.2007
* GCC Original CVS
* Web Interface: Nabilosat Personalized by Army
* Busybox 1.2.2

What'new in Nabilosat Images 0.6.1 ?
Included G*** Center
Included Nabilosat CCcam Info Center
Added Option to Use 7000 - 7020 Remote control instead of 500 Remote Control
Added in OSD CCcam Network Info:
  • Network address
  • hops
  • ecm time

Technical Infos:
* Enigma of: 28.3.2007
* GCC Original CVS
* Web Interface: Nabilosat Personalized by Army
* Busybox 1.2.2

Major Features
  • - Default Skin Army Wire with double style Menu .
  • - New Webif personalized by Army for Nabilosat
  • - Webif Nabilosat Emu manager (Start/Change/Manage Emus by Webif).
  • - Double style menu configuration (dreambox default and Nabilosat style)
  • - Infobar OSD position configurable (x and y offset).
  • - internal System picons[/COLOR] (Nabilosat 0.6 doesn't need picon plugin. Picons are image internal and doesn't not effect the zap perfomance and speed.
  • - picons location settings.
  • - NABILOSAT INTERNAL CRON
  • ---- Epg Refresh Scheduler
  • ---- Cam Restart Scheduler
  • ---- Commands or scripts execution scheduler
  • - Inadyn script: Inadyn log now enabled.
  • - graphical interface to show the Inadyn log. (Warning don't use old inadyn_script.sh. New inadyn script is not compatible with previous versions).
  • - User Script Manager, (put your script in dir /var/scripts/xxx_userscript.sh)

Function Buttons:
* BLUE NabiloCam Blue Panel
* YELLOW NabiloCp Yellow Panel
* RED - EPG list for active channel
* 2x RED - EPG style menu
* GREEN - subservices
--- NabiloCam Blue Panel (BLUE BUTTON)
* BLUE - Cam Manager (Start - Restart - Change - Auto Provider - Auto Channel ECM INFO IN PANEL)
* BLUE -> RED Fast Key donwload and Update
* BLUE -> GREEN Save default cam and Provider and Channel Autocam
* BLUE -> BLUE Extra Settings
* BLUE -> YELLOW System Info
--- Extra Settings (BLUE -> BLUE BUTTON)
* Openvpn Manager (Plus version Only)
* INADYN config
* OSD preferences
--- System Info (BLUE -> YELLOW BUTTON)
* DB Info
* Mount Points
* Process Info
* Memory Info
* Enigma Setup
* Bitstream
--- NabiloCp Yellow Panel (YELLOW BUTTON)
* YELLOW -> YELLOW Plugins
* YELLOW -> BLUE User Scripts (put your script in /usr/script/xxxx_userscript.sh)
* ADDONS DOWNLOAD MANAGER (Download and auto-install addons and OTHER DREAMBOX IMAGES)
* ADDONS MANUAL INSTALL PANEL (Put packages in /temp and install via manual panel)
* ADDONS UNINSTALL PANEL
* NABILOSAT FORUM (Read main Nabilosat Forums in your Dreambox)
* NABILOSAT SHOUTBOX (Chat with other Dreambox Users)
* SHOUTBOX NICK CONFIG (Set you nick for Nabilosat SHoutbox)
Features:
* Nabilosat addon server via internet.
* Shoutbox server via internet.
* AutoCam: Emu can be linked to channels/provider
* Fast K update directly from Blue Panel
* ECM INFO AVAILABLE DIRECTLY IN BLUE PANEL
* OSD: Extra Info switchable
* OSD ADDED INFO:
*** netcard_info
*** ecm_info
*** pro_name
*** feq
*** pol
*** sr_snr
*** fc_fec
*** cam_info
*** crypto_info irdeto_ecm seca_ecm via_ecm nagra_ecm cw_ecm ***_ecm conax_ecm beta_ecm
*** icon smartcard
*** icon emu
*** icon network
* System Info: Many extra box infos
* Nabilosat Forum browsing
* Extra menu: Settings for many features
* Own scripts can be started via Yellow Panel



No Keys, No Emu Inside.

======================
Thanks to all the PPL that contributhed to this version:
Nabilo - Franjuve and all the beta tester
Many Thanks to Army for Nabilosat skin and Webif personalization
Many Thanks to Matrix10 for Wonderful Skins and the testing and inspirations of major additions
Special thanks to greg, the best Beta Tester in the world :)
Many Thanks to all beta testers.
Special Thanks to Fbrassin for is great work to provide to Nabilosat ppl packages.
Special Thanks to Piefav for openvpn study and testing.
Special Thanks to Bacicciosat our best image coder
Enjoy Nabilosat !!​
 
Last edited by a moderator:

maximo

Super VIP
Messages
588
Nabilosat DM500 v. 0.8 MAXVAR

Nabilosat DM500 V. 0.8 MAXVAR



Technical Infos:
* Enigma: 10.05.2007
* Graphics additions by Nabilosat team
* Graphics Develop Consulting by Vali, Matrix, Army and Porto
* GCC Original CVS
* Web Interface: Nabilosat edition by Army


you can download languages from Nabilo addon panels and install in DM500 V 0.8

***********************
Great News for all Nabilosat Members
Here is the Nabilosat Image V. 0.8 for your Dm500
The main new of this version is that the skin system have been entirely recoded.
The new skin system is a singificative improvement in Nabilosat Images story.

This 0.8 version is MORE AND MORE STABLE AND FAST.
Many graphics objects have been added (Nabilosat Image v 0.8 is the first image in the world to have an Analogic Clock in the OSD).

There is a new way to manage extra/light skin.
In this 0.8 version, when OSD is shown you can press the button OK to have INSTANTLY the extra skin information on OSD.

You can set an option too to have a persistent clock on the television screen.

The new skin Validation 8 used all the new graphic improvments of the 0.8 versions with a very high quality style effect.

Warning: You can use only Skins for V. 0.8++ on this image.
 
Last edited by a moderator:

vegeku90

Registered
Messages
1,586
Nabilosat Enigma1 DarkStar II - DM500

Nabilosat Enigma1 DarkStar II - DM500




What is new in this DarkStar II DM500 ?

Updated CVS: 30 August 2008
The image has been completely recoded based on the latest CVS​
Updated Skin by porto
New DarkStar II skin customized by porto​
Enigma 1 Integrated 8 Days Sky IT EPG
Download 8 days Sky IT EPG, and have it integrated to Enigma1​
EPG Event Search
Select a single channel EPG, press 0, enter a keyword and search for your preferred events​
EPG Channels Selection
Customize the list of EPG channels to download. We reccomend to restart Enigma upon completing the selection​
EPG Channels Update List
Update the EPG channels list when there are changes​
Standby after reboot
Your DM will automatically standby after an accidental reboot, such as after a powercut​
Scheduled Reboot
Schedule an automatic daily reboot​
Main Function Keys
Button 1xOK = Light Info OSD
Button 2xOK = Extra Info OSD
Button Blue = Nabilo Blue Panel
Button 2xBlue = Nabilo Extra Settings
Button Yellow = Nabilo Yellow Panel - Plugins List
Button 2xYellow = Nabilo Yellow Panel - Addons Manager
Button Red = Current Channel EPG
Button 2xRed = Select Channel EPG or MultiEPG​
Features
Addons
Dedicated Addons Server
Download and install additional packages from Nabilosat server​
Infobar/OSD
Enigma1 Analogic Clock
Channel Orbital Position
Advanced Tuner Info: Sr Freq Pol Fec
Signal SNR, AGC, BER
Infobar Picons
Advanced EMU information​
Nabilo Panels features

1) Blue Panel
Extra Settings

Inadyn
Nabilo EPG Settings
Nabilo OSD Preferences
Nabilo Scheduler
----------------------
Mount Points​
System Info
Dreambox
Mount Points Info
Process Info
Memory Info
----------------------
Enigma Setup
Bitstream​
Save
Select/Start/Restart EMU​
2) Yellow Panel
Forums
Shoutbox
Addons
Scripts
Addons Download Manager
Manual Install Panel
Addons Uninstall Panel
Images Uninstall Panel
----------------------
Nabilosat Statistics​
Many thanks to the Beta Testers Team
Black33, ^^Corrado^^, ^^Maximo II^^, greg, Matrix10, Porto, ^)0(^Nabilo^)0(^, Army, Piefav, Franzjuve, Willow, fbrassin, Neri73, frimmino, astemio, DeepDiver, lorenzo64, robyhummy.


Credits
Sky IT Epg fully integrated to Enigma 1 by the great MaxZ4.
Many Thanks to lukkino (VDR-Italia) for opentv source code.


P.S. Soon another one version of image will be released for VPN users



Updated CVS






Updated Skin by porto

mainmenugo9.jpg


screenshot2ob4.jpg


screenshot3xf3.jpg





Enigma1 Integrated Sky IT EPG

screenshot4ld8.jpg


screenshot5im7.jpg


screenshot6yo5.jpg




EPG Channels Select & Update

chanselecton3.jpg


channelslistlb4.jpg


8 DAYS Sky IT EPG
EPG Event Search: press 0 on single channel EPG

Enter an event keyword
search1ju4.jpg


Press OK or the Green button
search2aa5.jpg


Keywords will be saved to speed up next search
search3my3.jpg



Nabilo Scheduler

schedulerun3.jpg
 

marce

VIP
Messages
7,115
Nabilosat Enigma1 DarkStar II - DM500 OpenVPN

What is new in this DarkStar II DM500 OpenVPN?

Fully integrated OpenVPN
This release is dedicated and reccommended exclusively to those who regularly use the OpenVPN functions. Those who do not require OpenVPN are suggested to use the standard light version, available here
The OpenVPN will automatically start upon image booting; should you wish to stop this feature, the file /var/bin/vpnauto must then be deleted.
Do not download and install the OpenVPN plugin available in the yellow panel, else the image will be corrupted.

Updated CVS: 30 August 2008

The image has been completely recoded based on the latest CVS

Updated Skin by porto

New DarkStar II skin customized by porto

Enigma 1 Integrated 8 Days Sky IT EPG

Download 8 days Sky IT EPG, and have it integrated to Enigma1

EPG Event Search

Select a single channel EPG, press 0, enter a keyword and search for your preferred events

EPG Channels Selection

Customize the list of EPG channels to download. We reccomend to restart Enigma upon completing the selection

EPG Channels Update List

Update the EPG channels list when there are changes

Standby after reboot

Your DM will automatically standby after an accidental reboot, such as after a powercut

Scheduled Reboot

Schedule an automatic daily reboot




Main Function Keys

Button 1xOK = Light Info OSD
Button 2xOK = Extra Info OSD
Button Blue = Nabilo Blue Panel
Button 2xBlue = Nabilo Extra Settings
Button Yellow = Nabilo Yellow Panel - Plugins List
Button 2xYellow = Nabilo Yellow Panel - Addons Manager
Button Red = Current Channel EPG
Button 2xRed = Select Channel EPG or MultiEPG

Features
Addons

Dedicated Addons Server
Download and install additional packages from Nabilosat server

Infobar/OSD

Enigma1 Analogic Clock
Channel Orbital Position
Advanced Tuner Info: Sr Freq Pol Fec
Signal SNR, AGC, BER
Infobar Picons
Advanced EMU information



Nabilo Panels features

1) Blue Panel

Extra Settings


Inadyn
Nabilo EPG Settings
Nabilo OSD Preferences
Nabilo Scheduler
----------------------
Mount Points

System Info

Dreambox
Mount Points Info
Process Info
Memory Info
----------------------
Enigma Setup
Bitstream

Save

Select/Start/Restart EMU

2) Yellow Panel

Forums
Shoutbox
Addons
Scripts

Addons Download Manager
Manual Install Panel
Addons Uninstall Panel
Images Uninstall Panel
----------------------
Nabilosat Statistics

Many thanks to the Beta Testers Team
Black33, ^^Corrado^^, ^^Maximo II^^, greg, Matrix10, Porto, ^)0(^Nabilo^)0(^, Army, Piefav, Franzjuve, Willow, fbrassin, Neri73, frimmino, astemio, DeepDiver, lorenzo64, robyhummy.


Credits
Sky IT Epg fully integrated to Enigma 1 by the great MaxZ4.
Many Thanks to lukkino (VDR-Italia) for opentv source code.




Updated CVS

aboutow3.jpg



OpenVPN fully integrated
vpninforc5.jpg


Updated Skin by porto
mainmenugo9.jpg


Enigma1 Integrated Sky IT EPG
screenshot4ld8.jpg

EPG Channels Select & Update
chanselecton3.jpg

channelslistlb4.jpg


8 DAYS Sky IT EPG
epgday1ri4.jpg

epgday8wc1.jpg


EPG Event Search: press 0 on single channel EPG

Enter an event keyword
search1ju4.jpg


Press OK or the Green button
search2aa5.jpg

Keywords will be saved to speed up next search
search3my3.jpg

Nabilo Scheduler
schedulerun3.jpg

Thx to Nabilo team
 

marce

VIP
Messages
7,115
Nabilosat v0.8 maxvar dm500s_blue mod borsalino

Nabilosat v0.8 maxvar dm500s_blue mod borsalino 04.07.2009


Code:
1-the new in this image
*Changed the original A new skins spectrum1+2+3+4
*add turkish Language in demarge
*delet old skins
*new bootlogo
*delet other longage
*add Nagrab and text
*add option DVR withe help botton
You new bootlogo
whate new in backup nabilosat_v0.8_maxvar_backup_blue

-optione DVR ok withe botton help
-font size add
-add Cccam2.1.1 ok
-change logo of demarage
-add new liste channelle (update)
-add Cccam speed
*new plugins add About twenty
*cccaminfo
*dreamnetcaste of radio net
*hacksat v9a for update
*pip
*mosaic
*tuxbox commander
*kalender2009
*satfinder
*cryptoinfo
*time dat
*rss tv guides
*new wither
And more plugines

Thx borsalino
 

Darkmoon

Registered
Messages
320
Nabilo Darkstar II E1

NEW PACK FOR (( Nabilo Darkstar II )) E1 IN DREAM 500


WE CAN USED FOR ORGINAL DREMA OR NO ORIGINAL NO PROPLEM

100 %


Code:
ADD :
 CCcam_2.1.2
Cccam info 
system info 
rss tv guides 
dream weather dreamnetcast 
satfinder 
mosaic tuxbox commander pip 
ngrab total football 

LAST CHANNEL UPDATRE



81878496.png


0hx7ds6vl9.gif


43858264.png


0hx7ds6vl9.gif


94980964.png


0hx7ds6vl9.gif


34408423.png


0hx7ds6vl9.gif


43109200.png


0hx7ds6vl9.gif


72215589.png
 

borsalino

Registered
Messages
52
Nabilosat BlueGreen Maxvar CCcam 2.1.2 mod Borsalino 07.08.09

Exclusive : my new modefecation image of Nabilosat V0.8 BlueGreen Maxvar CCcam 2.1.2 mod Borsalino 07.08.09
the new: emu Cccam_2.1.2 inside and the integration of the image and big var and new skins

Code:
New in this imege
-new bootlogo hd Wonderful
-Emu: CCcam 2.1.2 inside (start with image..and Work automatically )
-please send Cccam.cfg in var/etc withe ftp
-add Cccaminfo_v1.1 new (Yellow Button)
-add nagrab recording in image 
-teltext ok
-Changed the original skins withe the new skin exclusive_BlueGreen_E1_Nab_by_Borsalino 07.08.09
-please for the new menu Separate To obtain entre in menu setup then system settings then osd settings Then go Defauit Dreambox style Then select nabilosat style
-delet old skins
-Now you can change the form of a channel presntation withe button help
-add fransh and italian Language in demarge
-all longage ok 
-add option DVR withe help botton
-big var naw 83% Free espace
-font size add
-Fast image to open channels with Cccam2.1.2
-send this image withe dreamup or falshwizare

Here are some of the screenshote for this wonderful modifectione image of Nabilosat BlueGreen Maxvar CCcam 2.1.2 mod Borsalino 07.08.09
 

juli13

Staff member
Administrator
Messages
10,194
Nabilosat BlueGreen Maxvar CCcam 2.1.2 mod Borsalino&AfaCaN Backup 08.08.2009

Nabilosat BlueGreen Maxvar CCcam 2.1.2 mod Borsalino&AfaCaN Backup 08.08.2009

Code:
	Exclusive: CCcam 2.1.2 turkish mod Nabilosat BlueGreen Maxvar * special backup Borsalino & Afacan 8/8/2009 
 
There is no certainty Backupta with TimeBomp 
. 
Nevertheless, the responsibility lies with the installation. 
. 
Our forum does not accept responsibility. 

I recommend you get your backup before you install ... 
. 
After installation, your backup Cccam.cfg var / etc is enough to throw into .. 
. 
skin as Exclusive_BlueGreen_E1_Nab_by_Borsalino is installed.

	Dreambox password reset 
If you forget your password on the name of zero 
to examine many more features and all kinds of friends backupu 
You can see what is new addition 
. 
Friend than a new feature 
just look at the flow of foreign publications will be able to broadcast a daily cogunun 
use it for the first time I've explained below with pictures 
flow of all the channels broadcast in streaming, but does not open gördügünüz 
Some will not open my hand so it's not in the follow goodbye
 

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,481
DM500 Nabilo Darkstar CCcam 2.1.2 Full Motor Backup By Ferret

DM500 Nabilo Darkstar CCcam 2.1.2 Full Motor Backup By Ferret

A fully configured image ready for any motorised system.

Use DreamUP Only To Flash This Image

ATTENTION MOTOR IMAGE: Diseqc is turned off to avoid your motor moving before you have entered your coordinates. Before Connection of your LNB cable complete the following.

Turning Diseqc back on press Menu-Setup-Service Searching-Satellite Configuration.

Now highlight LNB0 and press ok then the Blue button for the next page.

Scroll to Diseqc mode and select Version 1.2 then green button to save,

Now exit got to Motor Setup input your coordinates save and shutdown.

Reconnect your LNB cable and boot your Dreambox.


Based On Nabilo Darkstar II.

Double Click Windows Media Player Streaming over local lan.

Default Language English.

Defalut Skin By Porto.

Fullskin.jpg


EMU Installed.

CCcam 2.1.2
CCcam Config simplified and usable mod by Ferret.
Latest Prio & Channel info.

Plug-ins-Addons Installed.

CCcam info
Needs Configuring to run your IP ect.

Full Motor Channel List With Favourites Bouquets For Most Providers Added by Ferret & MikeP

3RowView.jpg


Modified image to give improved channel list view in a 3 row format.

3rowview2.jpg


Window Media Player Streaming

Included in the rar is a file named dreambox.wpl extract this to you desktop.Right click it and open it with wordpad.

Edit this line with your Dreambox IP and password

<media src="bcmsdb://root:[email protected]"/>

Google and find bitcontrol Mpeg-2 codec and install them on you PC and reboot.

Now just double click the dreambox.wpl file and Media player will start streaming what your watching.

Credits to smiyako.

Hope this is of some use to newbies or member in a hurry :thum:

Ferret
 
Last edited:

borsalino

Registered
Messages
52
Nabilosat Darkstar II Exclusive CCcam 2.1.2 Mod Borsalino - 21.09.09

hi all
NEW modefecation With new additions image of Nabilosat Darkstar II DM500 Exclusive CCcam 2.1.2 Mod Borsalino 21.09.2009 :)
the new: emu Cccam_2.1.2 inside and the integration of the image and big var and new skins

New in this image
Code:
Emu: [FONT="Arial Black"]CCcam 2.1.2 inside [/FONT](start with image..and Work automatically )
-please send Cccam.cfg in var/etc withe ftp
-add [FONT="Arial Black"]Cccaminfo_v1.1 new [/FONT](Yellow Button)
-add ECM info
-add nagrab recording in image 
-teltext ok
-new bootlogo hd
-Changed the original skins withe the new skin [FONT="Arial Black"]Exclusive_Violet [/FONT]thanx to Jhosua15 & matrix
-delet old skins
-Now you can change the form of a channel presntation withe button help
-add fransh and english Language in demarge
-all longage ok 
-add option DVR withe help botton
-big var naw [FONT="Arial Black"]75% Free [/FONT]espace
-font size add
-Fast image to open channels with Cccam2.1.2
-send this image withe [FONT="Arial Black"]dreamup[/FONT] or [FONT="Arial Black"]falshwizare[/FONT] ok
screenshote of image
 
Last edited:

tani1

Staff member
Super Moderator
Messages
17,767
Nabilosat Darkstar II - Afacan Backup 22.09.09

NEW: Turkish Mod Borsalino & Nabilosat Darkstar II Exclusive_Violet CCcam 2.1.2 * special backup AFACAN 22/9/2009

Here are some of the screenshote for this wonderful modifectione image

Thx afacan
 

juli13

Staff member
Administrator
Messages
10,194
DM500 Nabilosat plus v. 0.6.1 MaxVar AFACAN* backup 15/10/2009

Code:
	DM500 v. PlusNabilosat * Special backup 0.6.1 MaxVar AFACAN 15/10/2009 
. 
trt game is open for the time 
. 
ecm information when I first pressing trt3 
I am returning TRT1 channel opens 

and eventually opened NTVSPOR buyurun ntv 
After the first feed ntvspora basıyoruz ntvspor DHA, 
assembly tv, rustavi2, open bazgiret tv. 
tested opened lunch is provided 
. 
Backup was created to be tested in the forum. 
. 
Backupta absolutely no TimeBomp 
. 
Nevertheless, responsibility does not accept responsibility until aittir.Forumumuz. 

I recommend you take before you install your spare ... 
. 
After installation your spare Cccam.cfg var / etc you can simply throw into .. 
. 
There is no language is available türkçe Turkish language backupda
 

cool753

Registered
Messages
25
Nabilosat Darkstar II_Skin Original_SPCS_2.5.16&CCCam_2.1.4_Maxvar_Mod cool753_25.02.2010

PHP:
cool753;
1 st release 25.02.2010
=============================
new modification ;

-new bootlogo arabic-sat
-Emu: Spcs 2.5.16 inside (start with image..in blue panel withe volume button for the built-Emu )
-Emu: CCcam2.1.4 inside (start with image..in blue panel withe volume button for the built-Emu )

-send reader.bin in /var/tuxbox/config with ftp
-send CCcam.cfg in /var/ect with ftp

-Skin orginal (Dark)
-French &English language
-big var  77% Free espace with Spcs emu and CCcam and more
-add = CCcaminfo&and Ecminfo&Mgcamdinfo&HackSatKeys V9a&Ngrab recording=inside image (Yellow Button) 
-add softcam (entv,foxlife....)
-disable MHW EPG (no frezz)
-Fast image to open channels with Spcs&CCcam
-send this image withe dreamup or falshwizard .
================================
89751313.jpg

52639778.jpg

47417250.jpg

93062144.jpg

76553247.jpg

22003939.jpg

36694294.jpg

84812089.jpg

98557772.jpg

24418357.jpg

70260831.jpg


PHP:
http://www.4shared.com/file/229688115/6680e5f2/Nabilosat_Darkstar_II_Skin_Ori.html
 

tani1

Staff member
Super Moderator
Messages
17,767
Nabilo Darkstar 2 CCcam 2.1.4 Rihanna Digi Turkish Original Mod by toddler 11.03.2010

- This image non time bomb
- CCcam 2.1.4, CCcam Info, Ecminfo, and Teletext Ngrab image is integrated.
- Image is in Turkish and English. (Other languages can be downloaded addons Server.)
- Update satellites.xml file with 4 satellites are used. (Turksat, Hotbird, Eutelsat and Astra)
- Channel list, list view at the help button to change the channel.
- 75% of the memory is blank.

Channel switching is very fast. Suggest you to try.

Before you install Cccam.cfg, channel list, etc.. do not forget to take backups of your files.
 

tani1

Staff member
Super Moderator
Messages
17,767
Nabilo v08 Maxvar Skinbase Turkish Original Mod bye toddler 20.03.2010

- This image non time bomb
- CCcam 2.1.4, CCcam Info and integrated Ecminfo image.
- Original skin called skin skinbase was integrated instead.
- Image is in Turkish and English. (Other languages can be downloaded addons Server.)
- Update satellites.xml file with 4 satellites are used. (Turksat, Hotbird, Eutelsat and Astra)
- Channel list, list view at the help button to change the channel.
- 84% of the memory is blank.
 

hilton

Registered
Messages
7,622
DM500 Nabilo V08 CCcam2.14 Dx3 19.07.2010_By meteor

For those who like a nice skin Nabilo DX3
Code:
** 2:14 CCcam is integrated.
** Ecminfo are integrated.
** Key updater is integrated.
** Turkish Teletext
** Available in Turkish and English language.
** Satellites.xml file used with four satellites. (Turksat, Hotbird, Eutelsat and Astra 19.2 W7)
** Channel list Channel list with gorunumu Button can be changed at the help.
84% ** u bostur Memory ...
 

baha2

Super VIP
Messages
6,530
Nabilosat BlueGreen Maxvar CCcam 2.1.2 mod Borsalino DM500

Nabilosat BlueGreen Maxvar CCcam 2.1.2 mod Borsalino DM500


Code:
Exclusive : my new modefecation image of Nabilosat V0.8 BlueGreen Maxvar CCcam 2.1.2 mod Borsalino 07.08.09
the new: emu Cccam_2.1.2 inside and the integration of the image and big var and new skins

New in this imege

-new bootlogo hd Wonderful
-Emu: CCcam 2.1.2 inside (start with image..and Work automatically )
-please send Cccam.cfg in var/etc withe ftp
-add Cccaminfo_v1.1 new (Yellow Button)
-add nagrab recording in image
-teltext ok
-Changed the original skins withe the new skin exclusive_BlueGreen_E1_Nab_by_Borsalino 07.08.09
-please for the new menu Separate To obtain entre in menu setup then system settings then osd settings Then go Defauit Dreambox style Then select nabilosat style
-delet old skins
-Now you can change the form of a channel presntation withe button help
-add fransh and italian Language in demarge
-all longage ok
-add option DVR withe help botton
-big var naw 83% Free espace
-font size add
-Fast image to open channels with Cccam2.1.2
-send this image withe dreamup or falshwizare

Thx catalano.

View attachment 232711

Code:
http://www.megaupload.com/?d=41YTVBM5
 

wahidd

Registered
Messages
187
Nabilo v8 Mod lonas v4 mbox 023.4.r - Sbox

nabilov8sbox.jpg

as me and some buddies have asked for the issue of card and updating here I bring the same image but with mod canvas v4 Sbox configured to put ash veneer card down,
Remember that you must add Sbox s e r i a l sbox.conf card on file in HEX.

Flaswizard charged without problems but I'm recommending that you have dreamup the forum to load these images.

* New Bootlogo boot.
* Only 18% occupied at / var (recieninstalada, then with some other plugin I'm at 30%).
* New Default Skin modified for Mbox04 Rihana_NET (includes d1 and d2 on the screen).
* Picture enhancement completely, eliminating all that is in use.
* Emus Mbox04 installed (023.4.r) and Sbox (ready to put the card with the plate low and rular pa).
* Installed scripts: Borrafakes of the compi Borraoffs cthulhufhtagn + plugin.
* Added in / var / keys / ident.info and ignore.list updated date.
* The Emus ... were installed in the / (root)
* Routes of Emus changed and now are / bin / mbox and / bin / Sbox (mbox eye to configure the control center and remember this.)
* Cwshare preconfigured with line C just to add your Dlin to it (do not substitute your own, just add your Dlin and delete the ones you are, remember to leave the C line to read the card and add your provider)
* To run the standby recalls stamdby.sh scrpt amend and replace where it says your password dreambox for your dream or not work if you changed the password If nothing changes nothing changes.
* The image is optimized for virtual or local Mbox, you only have to meterle the channel list and enjoy it.
* Mbox Center Plugin to view stats, color, card, etc ... (Click yellow button to access this)
* Default is only Mbox so you'll have to go to the blue button and select the command mbox + Sbox for you to read your card
* The image is pre-configured to read a card Ash land if you want to read another changes the providers for yours on the line C and has also added what corresponds in the folder keys 50000.list modify the lines for which G match your providers.
* This image is a respected throughout the web interface so you do not remove anything from 100 per 100 Nabil.
* Restarted one at 4:20 am and 4:45 put one in standby (remember to put your password to the script) if you want to change this by accessing the nabcron.dat in / var / etc / and edit or control right from the blue button and blue button again.
* Fixed a few bugs that had previous versions of Nabil v8 this is much more stable than the v3 and has even so much nonsense.
* The script is added startscript.sh loq ue to boot every time you boot or reboots the dream that you start metais loq ue to within the same script, it currently only has introduced borrafakes borraoff and which by a sleep of 3600 seconds (one hour) begin to function in this way we prevent the dream start to hang anything else because they do not start at the same peace that emus, we have given an hour's gap between the start of the emus and the script not to be hung and let the mbox make your function hello and such things.

This image does not bring any more script and only borraoff borrafakes the moment from what I have seen no problems share.onl is happening a lot lately,

Remember to update and ignore.list ident.info by that of the specific thread for this in the forum
not if I'm missing something but if I remember but will put it on the fly ....

remember that the settings for the Mbox Control Center now is this:

Code:
Nombre de archivo: mbox
 direccion ip: la tuya jeje
 Ruta Mbox: /bin
 Ruta Keys: /var/keys
 Ruta Temp: /tmp
 Ruta Mbox cfg: /var/keys/mbox.cfg

The image is set up and configure ASH GREY CARD FOR LACK OF A SERIAL IN HEX ADD YOUR BUT IF BY SEA WHAT ARE YOUR OTHER CARD FOR EXAMPLE you can see here VIACCES THE SET OF EACH:

sbox.conf
Code:
[main]
server_only=0                # 0=emu+newcamd server 1=only newcamd server
log=0                    # 1=no log 1=log to /tmp/sbox.log    //ALWAYS USE 0//
userspath=/var/bin/users.sbox        # users list
webinterface=0                # 1=web interface on 0=web interface off
webport=8181                # web interface port

[slot0]
active=1                # 0=inactive 1=active
sci=/dev/sci0                # lower
ncdserver=0                # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314    # newcamd deskey
port=50000                # newcamd port
mhz=0                    # Mhz for card in this reader, DON'T WORK ON PHOENIX INTERFACE. Example: mhz=357, mhz=368

# How to ADD RSA for TIGER/NCMED cards
# If your card is a ROM TIGER547 Rev124 (for example)
# [TIGER547] <- this is the rom version from your card
# rsa=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
# ONLY THIS, for config bloquer, portlist, etc, look at the examples above!

#Nagra2/3 Example
[CCCCCCCC]                # nagra2 hexserial (4 bytes)
rsa=                    # rsa "n" from this card (like newcs)
boxkey=                    # boxkey from this card
emm=0                    # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0                # use portlist or no
portlistpath=/var/****/port.list    # path from port.list

#Nagra tiger/ncmed Example
[CCCCCCCC]                # nagra hexserial (4 bytes)
emm=2                    # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0                # use portlist or no
portlistpath=                # path from port.list

#Seca Example
[CCCCCCCC]                # seca hexserial (4 bytes)
ok_view=0                # if ok_view=1 sbox simulates the "ok view this season" on seca smartcards
emm=7                    # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0                # use portlist or no
portlistpath=                # path from port.list

#Viaccess Example
[CCCCCCCC]                # via hexserial (4 bytes)
emm=7                    # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0                # use portlist or no
portlistpath=                # path from port.list
aeskey=                    # aeskey used by nano d2

#Irdeto Example
[CCCCCCCC]                # irdeto hexserial (4 bytes)
camkey=0000000000000000            # CamKEY
camkeydata=00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
emm=7                    # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0                # use portlist or no
portlistpath=                # path from port.list

#*** Example
[CCCCCCCC]                # *** hexserial (4 bytes)
emm=7                    # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0                # use portlist or no
portlistpath=                # path from port.list
boxid=                    # if sbox can't get boxid from card, add here manually

#Conax Example
[CCCCCCCC]                # conax hexserial (4 bytes)
emm=7                    # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0                # use portlist or no
portlistpath=                # path from port.list

#Example configuration newcamd client
[NewCamd]
#server0=dummy:dummy@localhost:15050/0102030405060708091011121314/0
#server1=dummy:dummy@localhost:15051/0102030405060708091011121314/2
#server2=dummy:dummy@localhost:15052/0102030405060708091011121314/7

port.list
Code:
SA: { 0001 } # Channel1
SA: { 0002 } # Channel2
SA: { 0003 } # Channel3
SA: { 0004 } # Channel4

users.sbox
Code:
#Example configuration file for sbox cardclient server

# [slot0]    # slot to connect
# user=lonas    # user
# pass=lonas    # password
# au=1        # au on/off

# [slot1]    # slot to connect
# user=lonas   # user
# pass=lonas    # password
# au=0        # au on/off


Code:
http://www.megaupload.com/?d=26PHUWEN
 

juli13

Staff member
Administrator
Messages
10,194
Nabilo v8 mod lonas v4 Cccam + SboX

Well fresh from the oven again from here you are again the new rebuild of this picture for those who asked me,

is proven in a dream and an original 500 and loaded with dreamup idbox500 and working perfectly,

UPDATE A DAY 28/08/2010 ########## #############
FIXED FIXED Sbox
modificadada version 2.1.2 cccam by
optimization of the image to be more relaxed
Emu CCcam as default, select cccam + Sbox in blue button
###############################################
 
Status
Not open for further replies.
Top