CSA-Rainbow_V1.23 - RTX 2080 Ti

izik888 said:

Hi

I get With software CSA-Rainbow_V1.23 Error 68 Cores Instead of 4352 cores on a graphics card GeForce RTX ™ 2080 Ti 11GB
And Win 10 Pro 64 Bit operating system

How to solve this problem ???

(...)

Click to expand...

68 x 64 = 4352

izik888 said:

You are a very smart man :thum:

I have a hard disk SSD 1TB 860 EVO - CW Search Time:Two minutes

Click to expand...

If you read the other threads you will see I use a GTX 1080 TI card.
Yes it shows like 28 cores.

Average time to get the CW is from 90 seconds. However I have a 4TB SSD and 3.6TB of tables and data for V1.

6TB HDD for V2 with over 4.2TB of data and tables.

izik888 said:

BLACKCRUSADER

It's not about a graphics card What matters is hard disk speed...
90 seconds because you have SSD Pro It should be faster Compared to SSD EVO

Click to expand...

Wrong. I have a 4TB Samsumg EVO drive not a pro drive. I'm running an older I7 7800 with 8GB ram on Win 7 Pro.

Of course the GPU matters. If not then any card would have the same processing speed and they do not. My processing for the CW changed from over 500 seconds on a GTX 730 to 90 - 120 seconds on the GTX 1080 TI

Again the 1080 TI is not the same as a 1080 card.

Maybe you need to understand both the crypt and the CW need to be processed, crypt from the SSD from RBT tables and CW from chains by the GPU.

Freeware "CSA-Rainbow-Table-Tool"
Homepage: http://colibri.bplaced.net/ alias http://colibri-dvb.info/
E-Mail: [email protected]
Version 1.23 (Nov, 7th 2014)

CUDA Driver Version: 9.20 - Runtime Version: 6.50
Number of CUDA Devices: 1
Device 0: GeForce GTX 1080 Ti (-28 Cores)

CRYPT 3A 8A 64 BD 37 97 58 CA

Search CW Start
RBT file: D:\Biss V1 file\B8hxFFh\B8hxFFh_table2\CSA_B8hxFFh_10000h.rbt
Calc all 10000h end values for this crypt ... (using file cache)
Search end values in RBT ...
Searching CW in RBT ...
Found 216356 possible chains (harddisk only search time = 107 sec.)
Analysing chains ... (will be 10 times slower if an other thread is keeping the GPU busy)
found CW: B5 24 D4 AD 3A 63 51 EE
Search CW done (119 sec.)

FaDeL® said:

may not be able to read Cuda on new generation graphic cards Because of the engineering modification In Cuda
Can Try V1.23,In any way, as I told you, there is no problem if the program works well

Click to expand...

Any card that is Cuda Biss will work including current cards.

how to load the gpu over 2070 and 2080 ti