Go Back   Sat Universe > DVB Cards Section > DVB Chat

Note: Visitors from certain countries might see in-text advertising(underlind words in posts) or pop-under ads.
It is only shown to unregistered visitors or members that haven't made any posts. So you can easily get rid of it.

World-Of-Satellite

Discussion about DvbViewer Pro

DVB Chat

Reply
  #541  
Old 06-02-2022, 13:09  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
Ozzyman Ozzyman is offline
Junior Member
 
Join Date: Sep 2017
Posts: 5
Thanks: 2
Thanked 0 Times in 0 Posts
Country: Country Flag
Default

Quote:
Originally Posted by sentaro2 View Post
Many thanks tdt. I just wanted to try it but I won't use DVBViewer since it does not allow the user to insert frequencies to scan, it is based on predefined transponder lists and I don't want to use other tools to scan when the same actions could be done by the program itself (as it was on old DVBViewer versions).
You need to edit .ini file manuaşşy from kingofsat
Reply With Quote
  #542  
Old 19-03-2022, 21:30  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
miles84 miles84 is offline
Junior Member
 
Join Date: Mar 2022
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Country: Country Flag
Default

hello guys , where can i fiind full specification what a pc need to conect on satelite ? can you help me ?
Reply With Quote
  #543  
Old 19-03-2022, 23:39  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
tdt tdt is offline
Member
 
Join Date: Feb 2014
Posts: 26
Thanks: 4
Thanked 3 Times in 2 Posts
Country: Country Flag
Default

What? Any PC from the last 15 years will work fine. Then you
need a satellite card and the antenna. Simple.
Reply With Quote
  #544  
Old 31-03-2022, 23:15  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
allion allion is offline
Junior Member
 
Join Date: Mar 2022
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Country: Country Flag
Default

Hello guys ! I tried anything i could find in the forum but still I have not found the issue. I downloaded the software from dvbviewer, followed the exact steps, the software runs smooth but i have only one problem, i cannot add the plugins section in the dvbviewer right next to "Help". I need it for the CW....so i can enter the key to view channels. I uninstalled dozens of times, reinstalled...can anyone provide me the solution to this ?
Reply With Quote
  #545  
Old 01-04-2022, 01:18  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
MickeEst MickeEst is offline
Senior Member
 
Join Date: Nov 2012
Posts: 66
Thanks: 158
Thanked 62 Times in 30 Posts
Country: Country Flag
Default

You need to put emu files into the plugins folder in DVBViewer, then Plugins menu will appear itself.
Reply With Quote
  #546  
Old 01-04-2022, 17:46  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
SatEze SatEze is offline
Donating Member
 
Join Date: Jul 2016
Posts: 272
Thanks: 153
Thanked 516 Times in 152 Posts
Country: Country Flag
Default

Quote:
Originally Posted by allion View Post
Hello guys ! I tried anything i could find in the forum but still I have not found the issue. I downloaded the software from dvbviewer, followed the exact steps, the software runs smooth but i have only one problem, i cannot add the plugins section in the dvbviewer right next to "Help". I need it for the CW....so i can enter the key to view channels. I uninstalled dozens of times, reinstalled...can anyone provide me the solution to this ?
This might help.

https://www.sat-universe.com/showpost.php?p=1234679
Reply With Quote
  #547  
Old 23-05-2022, 04:30  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
mx3000 mx3000 is offline
Senior Member
 
Join Date: Apr 2008
Posts: 52
Thanks: 232
Thanked 34 Times in 13 Posts
Country: Country Flag
Default

pls upload DVBViewer Pro 7.2.1.0 cracked

thanks
__________________
?
Reply With Quote
  #548  
Old 03-06-2022, 16:14  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
Noojanjer Noojanjer is offline
Member
 
Join Date: Apr 2016
Posts: 25
Thanks: 1
Thanked 260 Times in 17 Posts
Country: Country Flag
Default

DVBViewer Pro 7.2.2.0 (02-06-2022)



Change Log DVBViewer Pro 7.2.2.0

Fix: Recorder: Certain dynamic channel data (PMT) changes were not handled correctly, particularly audio track changes in connection with the “auto-split on channel data change” option, when German ARD TV channels switched over from common to regional programs.
Fix: Recorder: Some issues concerning manual (instant) recordings from the DVBViewer timeshift buffer (starting during timeshifted playback): The recording actually started at a position several seconds later, it could fail if the tweak “Automatically create TS Stream devices on demand” was switched off, the tool bar / TV/Radio menu did not respond by turning the record button gray / checking the “Record Current Channel” item, potential data loss when writing to disk due to a buffer overflow etc.
Change: Recorder: If no EPG data can be assigned to a recording, DVBViewer now stores the actual recording duration as duration value in its database and EPG Info file, not the timer duration anymore. This particularly applies to manual (instant) recordings with a default timer duration of 23:59 hours. If EPG data can be assigned, the stored duration value is the program duration.
Fix: Timer Recordings Window: Individual per-timer settings in the Include section, that deviated from the corresponding standard settings in the Include section on Options → Recording Timers, got lost on a DVBViewer restart, because they were not read correctly from the file timers.xml.
Fix: Media Server Client: If DVBViewer delegated timers to an associated Media Server (see Options → DVBViewer Media Server → Send timers to the server), changing the file naming scheme in the Timer Recordings Window did not work, because the scheme was not sent correctly to the server (see here).
Fix/Change: File/Timeshift Playback: Some fixes and enhancements concerning the display of the picture at the current position while seeking/jumping, when the EVR Enhanced Video Renderer (not Custom) is used.
Fix: File/Timeshift Playback: Seeking in pause mode with the Custom EVR or MadVR Video Renderer disabled returning to play mode by pressing / clicking Pause again, thus making it necessary to use the Play function (since 7.2.0.0, see here).
Added: TS Stream (HLS/MPEG Dash Live Streams): Jumping in internet live streams with the usual means (control bar, forward/back functions), if the broadcaster provides a timeshift buffer (e.g. German public broadcasters). The control bar shows the total duration of the buffer and the current position in this buffer. The previous setting for a fixed (static) time offset in the Channel Editor has been removed. Please note that jumping in the broadcaster’s timeshift buffer is not available
if its duration is less than 3 minutes.
if DVBViewer is associated with a Media Server on the same PC, from which it obtains internet streams in order to avoid double bandwidth occupancy. This is the default setting. For using the broadcaster’s timeshift buffer the tweak “Receive TS Stream via the local Media Server” has to be switched off (→ launch Tweaker.exe, see 7.0.0 changes → Media Server Support).
if the internet connection of the virtual TS Stream Device additionally supplies other “consumers” like Picture in Picture or a recording besides main window playback. Only the latter is able to handle on-the-fly position changes in the broadcaster’s timeshift buffer. A recording would be spoiled by it.
if the built-in DVBViewer timeshift is active, e.g. after Pause or the start of a manual (instant) recording.

Manual (instant) recordings start at the current position in the broadcaster’s timeshift buffer. If it is timeshifted, DVBViewer performs the recording itself, independently from the “Send timers to the server” setting. However, timer recordings always start at the live position of the channel (with a small default offset, see below). Simultaneous timeshifted playback of the channel causes double bandwidth occupation. Just as for different channels, reading from different positions in the broadcaster’s buffer requires a separate internet connection for each.

Added: TS Stream (HLS/MPEG Dash): Tweak “Default delay for HLS/MPEG Dash playback” (→ launch Tweaker.exe). The settings specifies the default position in the broadcaster’s timeshift buffer, or with other words, how many seconds playback lags behind the "live edge" of HLS and MPEG Dash live streams. This allows DVBViewer to fetch data ahead and to buffer it, in order to avoid stuttering playback. It can be regarded as a "minimum timeshift" that DVBViewer tries to establish. The default is 30, the minimum 10 and the maximum 60 seconds. The default in previous DVBViewer versions were hard-coded 30 seconds.
Change: Timeshift / Control Bar: While the Control bar slider is dragged in timeshift mode, the time display now changes from timeshift buffer position / timeshift buffer length to time at the current position / time now. This enables seeking for a certain time in the past at which a program shall be watched. The change applies to seeking in a DVBViewer timeshift file, as well as in a timeshift buffer provided by the broadcaster in case of HLS / MPEG Dash streams (see above). Please note that for DVBViewer timeshift a precise time measurement cannot be expected, because the timeshift file position is calculated by assuming a constant average data rate, which may be actually variable. So the time display should only be regarded as a rough guide.
Change: Timeshift / Main Window: EPG information appearing in the DVBViewer Main Window during timeshifted playback (e.g. in the Control Bar and the OSD Mini EPG) now indicates the program at the played point of time, not the currently broadcasted program anymore. The change applies to DVBViewer timeshift, as well as timeshift provided by the broadcaster in case of HLS / MPEG Dash streams. Concerning the precision of time calculation, the same restrictions have to be considered as for the time display in the Control Bar (see above).

Added: Configuration Wizard: Possibility to select the broadcast standard (DVB, ATSC, ISDB Japan, ISDB South America) on the EPG Settings page. It helps DVBViewer to decode EPG data correctly (see below and here).
Change/Added: EPG: EPG start times from ISDB EPG data are now converted to DVB compliant times (UTC, GMT) on arrival, so that afterwards they can be handled like DVB EPG data throughout and the “Automatic Time Zone” setting in the EPG Options is applicable. In detail:
Japan: The broadcasted EPG start times are UTC+09:00 (JST, Japan Standard Time), so 9 hours are subtracted. On a Japanese PC, the EPG Options in Automatic Time Zone mode will usually show a GMT offset of +09:00 (see here), which is added to the UTC EPG times, yielding the original JST value.
Latin America: The broadcasted EPG start times are UTC-03:00 (Brasilia time zone, see here), so 3 hours are added. The GMT offset displayed by the EPG Options in Automatic Time Zone mode will depend on the actual time zone for which the PC is configured and whether daylight saving time is in effect.

Please note that DVBViewer does not detect the ISDB broadcast standard automatically. If not already set up in the Configuration Wizard (see above), it has to be configured by launching Tweaker.exe, searching for the “Broadcast Standard” setting and entering 2 for ISDB Japan or 3 for ISDB Latin America.

Change: EPG: Smarter algorithm for rounding EPG times to minutes, if they are broadcasted to the second. It avoids 1 minute gaps or overlaps between adjacent programs due to double rounding errors.
Fix: EPG Options: The times in already received EPG data were not adjusted to a changed GMT offset after switching from Manual to Automatic Time Zone mode.
Added: Channel Editor: On the Reception Settings page there is a new checkbox “Check for updates”. If it is ticked (default), DVBViewer checks if its program directory contains a newer version of the transponder list file that shall be used for a channel search. If yes, the user is prompted to decide whether the old file in the Transponders subdirectory of the Configuration folder shall be renamed to .bak and replaced by the new one. Please note: Only users that maintain their transponder list themselves, e.g. by using TransEdit, should untick this checkbox.
Added: Channel Search: Additional transponder lists installed with a new DVBViewer version are now copied automatically from the program directory to the Transponders subdirectory of the Configuration Folder, where the transponder lists that are used for a channel search are stored. Previously this had to be done by the user.
Change: Channel List: When using the channel list with media file entries as playlist (see 7.0.0 changes → Channel List) the Previous/Next actions (|< and >| buttons in the Control Bar) now switch back/forward to the previous/next file(previously one minute back/forward). This switching and also the automatic switching at the file end plays the previous/next file from the beginning, without considering the setting Options → Movies → On resume ask. Any other kind of switching to a file entry in the channel list (including channel/favorite plus/minus) obeys the setting (see here).

Added: Channel List: The “Show EPG Hints” option in the channel list context menu lets DVBViewer additionally show the EPG for recordings that have been added in the Channel Editor as file entries (see 7.0.0.0 changes), provided EPG data is available in the recording database or an EPG info file. Music file metadata is also shown (artist, title, duration, album e.g. originating from MP3 tags), if available, and for other files at least the complete filename without path.
Fix: Channel List: If the channel list contained entries with the TS Stream reception type and the Tweak “Automatically create TS Stream devices on demand” was switched on (default), selecting the Filter → Only Available Channels option in the context menu of the channel list let DVBViewer freeze due to an infinite loop.
Added: Channel List: New menu item “Sort by Channel Number” in the context menu of channel list representations (except OSD and Channel Editor). This item is only visible if Options → TV/Radio → Use custom channel numbers is switched on (see here). Channels without custom channel number (LCN) are put to the end of the list.
Fix: Favorites Editor: A changed category name was updated in the favorites menu, but not in other channel / favorite list representations unless DVBViewer was restarted.
Fix: Channel Editor: Media files with network paths (UNC) in M3U playlists were not imported into the channel list, but skipped,
Fix: Channel Editor: Incomplete ID values were assigned to media files imported into the channel list. They were corrected automatically on next DVBViewer start. However, favorite list entries for these media files that were created before the restart did not work anymore because they still referred to the incomplete ID.
Removed: OSD: Selection dialog for German Sky option channels. It could be opened in certain situations with OSD Green (F6). Sky only provides this mechanism for some SD channels. Moreover it didn’t work correctly anymore since DVBViewer 5.6.
Fix: OSD: Misalignment between the mouse position and the internally stored coordinates of OSD elements after starting video file playback using the VMR7/9 or standard (non-custom) EVR Enhanced Video Renderer. It caused mouse operation in the OSD to work imprecisely or not at all (see here).
Fix: Subtitles: Blu-ray subtitles (presentation graphics) did not work anymore (since 7.2.0, see here).
Fix: HbbTV: Measures against the unnecessary additional download of media files and streams by the HbbTV browser besides the download performed by the DVBViewer playback engine.
Change: HbbTV: Measures enabling the HbbTV OSD window to process playback state changes even if it is not active, in order to prevent a premature stop of HbbTV videos.
Fix: Teletext/HbbTV Options: A change of the “HbbTV auto start for all channels / only radio channels / no channel” settings required a DVBViewer restart to take effect.
Fix: Hardware Options: The Default Button in the RTSP Network Device settings dialog reset the UDP port range to the old values 52000...52100, not to the new values 47700...47800 (see 7.2.0 changes).
Change: General: A PC shutdown performed by DVBViewer now considers whether the Windows fast startup feature is enabled (also called hybrid shutdown, available since Windows 8). If yes, shutdown is performed with a flag that lets Windows boot faster on next startup, due to the usage of “suspend to disk” (hibernation). Otherwise a shutdown performed by DVBViewer causes a “traditional” power off and subsequent slow startup (see here).

Fix: General: Measures against potential access violations when DVBViewer gets closed.

Updated: OpenSSL Libraries to version 1.1.1n with an important security fix.
Reply With Quote
The Following User Says Thank You to Noojanjer For This Useful Post:
velid2125 (04-06-2022)
  #549  
Old 28-07-2022, 15:08  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
birkiki birkiki is offline
Junior Member
 
Join Date: Nov 2011
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Country: Country Flag
Default

pls upload DVBViewer Pro 7.2.2.0


This is possible?

Thx !!
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 04:45.


Powered by vBulletin
Copyright ©2006-2019 - Sat Universe