Q-box images(Sif,Avalon,Original)

Status
Not open for further replies.

prelude

Registered
Messages
12
Q-ACTIVE 'TEUTONIC 3' conax fix

Q-ACTIVE 'TEUTONIC 3' Image 22 August 08 (look at sataid)

Conax fixed on 1west
 

prelude

Registered
Messages
12
Q-ACTIVE 'TEUTONIC 4' (24 August 08) (look at sataid)

Conax Fixed on 1west (22 August 08)
Channel List updated [24 August 08]
This backup image is best used with a Motorised setup set, using the DISEqC 1.2 option.
Based on the QBox Official Image v1.4.0.
All satellites from 80east to 45west are included.
 

k@lkov

Super VIP
Messages
10,003
Q-box images

New Qbox Orginal Image.1.5.1
Code:
Now the terrestrial channels management works great; 
after upload the channel setting in the Q-box, you have to push 
blu key in the remote control, then choose the option scan terrestral 
channels.....after the scan wait till the stb automatically reboot itself
(about 30 seconds o a little more). Then you will find a new folder 
added to your previous channel setting called "terrestrial".
The terr. channels zapping is fast like the satellite channels, just 
when you change between a sat channel to a terrestrial, you have 
to wait about 6-8 seconds, for an internal hardware switch between 
the two different tuners.......coming soon Blind scan full functions 
by hardware tuner.
 

k@lkov

Super VIP
Messages
10,003
Q-active 'teutonic 5

Code:
Conax Fixed on 1west (12 September 08)

Sorry for the late update, but I've been 
pre-occupied with other projects, when I 
have time I shall make a start a mod on 
Official version 1.5.1.

This backup image is best used with a Motorised 
setup set, using the DISEqC 1.2 option.
 

prelude

Registered
Messages
12
Q-ACTIVE 'PROLIFIC' (20 September 08)

Q-ACTIVE 'PROLIFIC' (20 September 08)

New Channel List included 'Captain's List' updated [28 August 08]

Bootlogo updated this will now only occur on new versions in future.

Also the reset time has been reduced from 30 seconds to 5 seconds.
That means whenever you turn off the QBox, you only need to wait 5 seconds before you can turn it back on again.

This backup image is best used with a Motorised setup set, using the DISEqC 1.2 option.

Based on the QBox Official Image v1.5.2.

================================================================
Please Note: The Blind Scan option will NOT work on a multi-satellite setup, it will only work on a single satellite setup and or dual.
A fix is now being worked on, to address this issue.
================================================================

Terrestrial Channels Search okay, a folder called 'Terrestrial' will be made under 'Bouquets' containing the terrestrial channels, making it easier to locate.
 

prelude

Registered
Messages
12
Q-ACTIVE 'PROLIFIC 1' (22 September 08)[look on sataid]

Blind Scan now working 100% on motorised setup.
Just press the blue button -> QBox Manager -> Blind Search, press Green button to start scan, Red button to stop scan.

This backup image is best used with a Motorised setup, using the DISEqC 1.2 option.

Based on the QBox Official Image v1.5.2.

Terrestrial Channels Search okay, a folder called 'Terrestrial' will be made under 'Bouquets' containing the terrestrial channels, making it easier to locate.

All satellites from 90east to 61west are included.
 
Last edited by a moderator:

elgeneral

Registered
Messages
7,811
Version 1.5.3

-Blind Scan feature now create a FEED folder in bouquets after scanning, this make it easier to see the scanned frequency.

- Bug in terrestrial scan fixed.

- Smartcard driver updated.
 

elgeneral

Registered
Messages
7,811
Version 1.5.4

- Blind Scan works with 1 Mhz step.

- Delayer interface added on QBOX Manager plugin.
 

elgeneral

Registered
Messages
7,811
Q-ACTIVE 'PROLIFIC 4' (07 October 08)


Modified v1.5.3 Image.

A modified Image of [v1.5.4] will only appear, once the Blind Scan option has been fixed, as of now, there is a problem associated with doing a Blind Scan.

Added to this version is [Luxsat keyupdater 3.0] which is an alternative to [HackSat v9b], both options will be implimented in all forth coming updates.

To access the above, just click the Blue button.
 

elgeneral

Registered
Messages
7,811
Q-ACTIVE 'PROLIFIC 4' (07 October 08)
Modified v1.5.3 Image.



There has now been a Second upload of 'PROLIFIC 4' as the first had a corrupt file, and as a result it failed to open Conax channels on Thor, this has now been corrected.
Sorry about that, but I only just realised that there was a problem.


Laurals
 

elgeneral

Registered
Messages
7,811
Q-ACTIVE 'PROLIFIC 5' (15 October 08)

Modified v1.5.3 Image.
The QBox is more than just a Dream ... It's a Reality.
A modified Image of [v1.5.4] will only appear, once the Blind Scan option has been fixed, as of now, there is a problem associated with doing a Blind Scan.

Channels updated: includes additional channels to Thor.

Added to this version is [Luxsat keyupdater 3.0] which is an alternative to [HackSat v9b], both options will be implimented in all forth coming updates.
To access the above, just click the Blue button.
 

elgeneral

Registered
Messages
7,811
TDTeam Q-Box 1.55 EMU

EMU
Enabled the image to start an emu in the boot, you've got to put every single file of the emu to use in its place and with the necessary attributes.

(By default brings CCcam installed with the name "emu", just change the file and restart CCcam.cfg)

IMPORTANT: The name of the binary of emu in colocareis that var / bin to be under the name "emu" in this way start any emulator without having to change the script of the boot.

LIST OF CHANNELS
Last of the 15-10 version of the companion kr5323
SKIN
Skin TuXeR by Porto




Gracias Beor ®
 

elgeneral

Registered
Messages
7,811
Q-ACTIVE 'PROLIFIC 6' (07 November 08)
Modified v1.5.3 Image.



This update is aimed at all those users, who for one reason or another, are unable to add the update for Conax channels on Thor themselves.


This version now opens the Conax channels on Thor.


Gracias laurals53
 
Status
Not open for further replies.
Top