Smargo SmartReader + Frimware

Status
Not open for further replies.

kiliantv

Super VIP
Messages
7,057
Smargo Smartreader Frmwareupdate V1.04

Smargo Smartreader Frmwareupdate V1.04

smartreader2.jpg

The SmartReader is an USB cardreader /programmer based on a powerful ATMEL ARM 91 processor. The SmartReader + incorporates an integrated USB to Serial converter, which enables the SmartReader plus to work with all standard Phoenix compatible Linux and Windows applications.

The SmartReaders supports besides Linux/Windows computers and receivers like Octagon SF-1018 HD PVR Linux Twin, various Linux and Windows applications for PCI-DVB or USB-DVB.

Details
...................................................................................................................
- Powerfull ARM 91 Thumb Processor
- High-performance 32-bit RISC Architecture
- High-density 16-bitInstruction Set
- 64 Kbytes, organized in 512Pages of 128 Bytes (Single Plane)
- 16 Kbytes Internal High-speed SRAM, Single-cycle Access at Maximum Speed
- Low-power RC Oscillator, 3 to20 MHz On-chip Oscillator and one PLL
- Supports 3.20, 3.43, 3.69,4.00, 4.36, 4.80, 5.34, 6.00, 6.86, 8.00, 9.61, 12.0
and 16.0 MHz for smartcards (T=0 and T=1)
- No switches on programmer to select the desired mode, automatic frequency controll
- 5V smartcard support
- Frequency/Baudrate autocalculation and Frequency Generator
- Developer guide available.
- Works on all Dreambox Models with USB connection, also on 6 MHz with Dreambox 7025.
- Can be cascaded with more SmartReaders (>100) in 1 system using an USB Hub
- Fullspeed USB1.1/ USB2.0
- Com Port via USB
 

sonic67

Registered
Messages
208
Beschreibung:

SmartreaderUpdate_v1.5

sorry no changelog.

Edit by Kiliantv

Only for Testing.

No Official Update!!! - BETA!!!
 
Status
Not open for further replies.
Top