oscam for 920HD

sillyprice

Registered
Messages
52
Hi Guys
how many oscam do I need in /etc/tuxbox/config?
Could I have an working oscam.config file please?
I have installed newnigma2 image
many thanks
 

sillyprice

Registered
Messages
52
Hi

I wanted to treat myself for Christmas with a new satellite receiver

I have upgraded from a VU+DUO to Dreambox 920 HD. ( i have used a dreambox 7020 in the past)

I am familiar with mgcamd and cccam but I was told by masterG that mgcamd and CCcam won`t work on arm based dreambox receivers.

I have installed newnigma2 image and downloaded oscam from blue panel. Oscam starts and can be accessed via webif



Problem I have is that my line works perfectly with VU+DUO in /var/keys/newcamd.list but it does not work in oscam in var/etc/tuxbox/config/oscam.server

I have followed masterG instruction and my line looks like this:



[reader]

label = "main_xxxx.cc_20101"

protocol = newcamd

key = 0102030405060708091011121314

device = yyyyy.net,20101

user = zzzzzzzz

password = wwww

group = 1

audisabled = 1

inactivitytimeout = 300

ident = 0500:060С00,042300,041700,023100,042800,042820,043800,050C00,041200,050F00,024700



I am doing something wrong or do you have any suggestions?

I took few snips but I don't think I am allowed to post attachments
 

fushkrujs

VIP
Messages
1,123
Description

Here I once built a small plugin.

So you do not need to do any more commands in the console.
Makes the blue button by itself
And then you can always stop or start / restart

Manual:

1. Unpack Rar
2. Folder "SoftcamControl" to / usr / lib / enigma2 / python / Plugins / Extensions / ...
3. Just press the blue button at the beginning and all files and console commands will be executed.
4. After the blue button (installation) Oscamconfigs (/ etc / tuxbox / config /) adjust according to your needs and in the plugin press the green button.

Suitable for original images or images where there is no Softcammenü.

Tip. You can also make the configs files directly in the plugin folder.

In the folder SoftcamControl-Oscam you can swap the Oscambinary (must be called oscam) and in the folder config your configuration.

The files are all pushed with the blue button in the correct folders.
Thus, you have to push for an image change only the plugin into the image and
Press the blue button.
Then the green button and Oscam should start.
 

sillyprice

Registered
Messages
52
Many thanks for this. I have a working image in flash running oscam (openPLI thanks to vladan). Beside oscam from var/bin and config folder from var/etc/tuxbox do I need to copy any other files from this working image?
 

sillyprice

Registered
Messages
52
Description

Here I once built a small plugin.

So you do not need to do any more commands in the console.
Makes the blue button by itself
And then you can always stop or start / restart

Manual:

1. Unpack Rar
2. Folder "SoftcamControl" to / usr / lib / enigma2 / python / Plugins / Extensions / ...
3. Just press the blue button at the beginning and all files and console commands will be executed.
4. After the blue button (installation) Oscamconfigs (/ etc / tuxbox / config /) adjust according to your needs and in the plugin press the green button.

Suitable for original images or images where there is no Softcammenü.

Tip. You can also make the configs files directly in the plugin folder.

In the folder SoftcamControl-Oscam you can swap the Oscambinary (must be called oscam) and in the folder config your configuration.

The files are all pushed with the blue button in the correct folders.
Thus, you have to push for an image change only the plugin into the image and
Press the blue button.
Then the green button and Oscam should start.

Thank you for all your help but I am returning my dreambox and get a VU+ ultimo 4k instead.
 

zeros

Registered
Messages
178
You are missing activation (enable = 1).
[reader]
label = "main_xxx"
enable = 1
protocol = newcamd
...
 

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
29,632
here is the oscam from @juli13 in tar.gz ;)
 
Top