A Brief Flashing Guide

Status
Not open for further replies.

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,480
A brief flash guide

Start
the Flash tool VU + Util Start

1vuduopdfadobereader.png


Select your COM Port

2manualforvuutilpdfadob.png



Deselect DHCP if you have not setup IP VU + duo

vuplusdhcpon.jpg


Then click on Connect button

3manualforvuutilpdfadob.png



Now you should see Serial port open Please turn on your box.

Do this with on power switch For Ethernet Flash Tick DHCP is set next Click on Set IP button and enter your IP

5manualforvuutilpdfadob.png


Now youll see "IP Setup Success" in the VU + Util

6manualforvuutilpdfadob.png


Click open and select your NFI image file.

7manualforvuutilpdfadob.png


Press the flash Button

VU + Util then says "Reading file, please wait a moment ..."

8manualforvuutilpdfadob.png


Wait till you see flashing process is completed

9manualforvuutilpdfadob.png




Now the update is finished and you can disconnect and then finish with a Click on the Exit button VU + Util.

Now power off then on.

Translated roughly from German by me

Credits to original author :thum:

Ferret
 
Status
Not open for further replies.
Top