Vplug_SSSP_Via2.6-3.0

Status
Not open for further replies.

baha2

Super VIP
Messages
6,530
ACTIVE : CANALSAT & BIS TV

- The program run without internet connection
2 - Link your computer with the receiver
3 - Click and type in (GboxCom SSSP)
4 - Port: Port 1 (if it works not change ports)
- Baud rate: 115200
- Data bits: 8
- Stop Bits: 1
- Parity: None
- Flow Control: None
5 - Press OK
6 - Click on Log
7 - After it works directly

Do not forget to activate vplug in the program

Tested by me On Ali B == Alpha
 
Last edited:
Status
Not open for further replies.
Top