starsat 2000 hd extreme boot problem

3xtr3m3d

Registered
Messages
8
Hi

I have a starsat 2000 hd extreme and while I'm updating software power went out.

so i tried to flash it using RS232 but its getting failed after 3-4 seconds.

if i start box, its showing starsat logo and nothing happening.

what should i do? Please help


Regards
 

abutunis

Registered
Messages
13
Boot on starsat 2000 hd extreme

To resolve this probleme u will:
1- format flashdisk in fat32.
2- download the file in the link unzipp-it and rename the file .bin into GxRom.bin

https://www.sendspace.com/file/udtymr

3- copy the file GxRom.bin in the flash disk.
4- put the flash in the receiver and plug the receiver in sector.
5- in the same time we will premut the power botton in the remote and don't release it only when we see upgrading in the frontal panbel.
When complete the receiver is ok
 

joecoolgr

Registered
Messages
340
To resolve this probleme u will:
1- format flashdisk in fat32.
2- download the file in the link unzipp-it and rename the file .bin into GxRom.bin

https://www.sendspace.com/file/udtymr

3- copy the file GxRom.bin in the flash disk.
4- put the flash in the receiver and plug the receiver in sector.
5- in the same time we will premut the power botton in the remote and don't release it only when we see upgrading in the frontal panbel.
When complete the receiver is ok


Hi there and thans for the help.
I try it in my SR-2000HD HYPER but is not working.
is the same file for HYPER too?
thanks a lot
 
Top