Note: Visitors from certain countries might see in-text advertising(underlind words in posts) or pop-under ads.
It is only shown to unregistered visitors or members that haven't made any posts. So you can easily get rid of it.

World-Of-Satellite

What is DiSEqC?

Satellite TV Information Department

Closed Thread
  #1  
Old 16-08-2007, 16:24  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
Rocknroll's Avatar
Rocknroll Rocknroll is offline
 
Join Date: Jul 2006
Posts: 6,155
Thanks: 10,315
Thanked 27,217 Times in 3,800 Posts
Country: Country Flag
Default What is DiSEqC?

Thx to WeetHet

DiSEqC
Digital Satellite Equipment Control - developed vby EUTELSAT and Phillips. The purpose was to define a standard enabling satellite recievers to control aad-on equipment like rotors, LNB switches, etc.
The most common use would be to switch, for example, between two different satellites that are received by 2 different LNB's or dishes, and hook it up to one single reciever.


Why DiSEqC?


Older satellite recievers started to create their own little standard and solution for several switching purposes. This started to confuse customers (which works with what?) so it was time for a decent standard.
Some satelliet recievers use a 14/18 Volts currency to switch between the Horizontal and Vertical polarisation.

Another thing to switch, often done by using a 22Khz tone-burst, is switching satellites (2 LNB's either mounted on 1 or 2 dishes).
Now-a-days the upper frequency range (11,7 to 12,75 GHz) becomes more and more of interest for use in digital programs. The LNB's used for this purpose are universal LNB's (10,7-11,7 and 11,7-12,75 GHz) which use the 22kHz-Signal to switch between these two frequency ranges. This however is in conflict with the original use of the 22Khz Tone-Burst: siwtching between two satellites.
Using DiSEqC changes this for the better. In our digital world, we can send digital commands to the add-on equipment. DiSEqC is downwards compatible, so older equipment should work just fine with newer DiSEqC equipment. It's true that a DiSEqC 2.0 compatible receiver kan work just fine with a DiSEqC 1.0 LNB-switch.
The otherway around might or might not work, it all depends on the switch. Most of them do listen to DiSEqC 1.0 commands, some don't.
TIP: Make sure that you can return the switch if it's not working properly.
The concept of DiSEqC continues to use 14/18 Volts and 22Khz tone-burst concept. DiSEqC additionally uses digital commands to control equipment (naturally, both receiver and switch must be DiSEqC compatible).
DiSEqC is of use for both analog, digital and analog/digital systems.


DiSEqC variants


Mini-DiSEqC
Uses the 22Khz Tone-Burst (= Mini-DiSEqC), being able to switch between two individual universal LNB's (for both digital and analog satellite reception), where the switch always has only one of the two LNB's active. This switch is a specific DiSEqC compatible switch using both the 14/18 Volts cuurency and the 22 kHz Tone-Burst for control purposes.
DiSEqC 1.0
DiSEqC Version 1.0 allows you to connect up to 4 receivers to your receiver, where the receiver (master) controls the switch (slave) by sending digital commands for selecting the desired LNB.
These signals are used:
- low or high band frequency
- vertical or horizontal polarisation
- which LNB should be activated
DiSEqC 1.0 uses:
- reception of 1 satellite (using 1 LNB) - 14/18 Volt
- reception of 1 satellite for both digital and analog reception - 14/18 Volt
- reception of 2 satellites (using 2 LNB's) - 14/18 V + Tone-Burst
- reception of 4 satellites (using 4 LNB's) - 14/18 V + Tone-Burst + Loop-Through
Special LNB's allow you to use the Loop-Through signal, where the 2nd LNB's signal is being routed through the 1st LNB. This works with DiSEqc 1.0.
DiSEqc 1.2
Can additionally be used for automatically control of rotor-based dishes.
DiSEqC 2.0
DiSEqC 2.0 adds a return channel, used for getting information on the connected add-ons. It will inform the reciever, after sending a particular signal, about the amound and type of LNB's available and how they are interconnected.
Particular 2.0 applications (Next to the 1.0 applications):
- Reception of up to 4 sattelites
- Two way channel (info on what's connected to the receiver)
DiSEqC 2.1
Adds the ability to control up to 64 LNB's, I can't imagine what my house would look like with that many dishes, but hey,... you can if you want to (sent me a picture!).


Which DiSEqC version do I need?



When using only one dish, with 1 LNB for only one satellite: basically any equipment will do just fine.
If you want to receive 2 satellites, for example the Astra and the Hotbird (EutelSat), your reciever should at least be able to control one switch, using any DiSEqC version. Actually a Tone-Burst ability should be sufficient.
When using 3 or more dishes, you will definitly need at least DiSEqC 1.0 or higher (depending on what your setup looks like).
When using a rotor for your dish to change position, you should go for DiSQeC 1.2 or higher.
Note that almost ALL LNB switches support DiSEqC 2.0, but often they are able to work with lower versions aswell. At least that is what is said... only experimentation will show if it works, so make sure you can return the switch if it doesn't work.
Most LNB switches sold in Europe are inteded to work with the Astra and the Hotbird (Eutelsat). This implies they should work with the receivers for these satellites aswell. Most modern receivers support at least DiSEqC 1.0 anyway.
The Following 13 Users Say Thank You to Rocknroll For This Useful Post:
boris70 (02-11-2018), costa46 (16-08-2007), garbai (04-09-2009), ig0r (26-08-2009), isenguard (16-08-2007), m7ckey (18-07-2009), Pattyren (16-08-2007), sutern (18-08-2007), T24 (11-05-2008), TheBourne (30-01-2010), tseamr2 (07-10-2009), william-1 (19-11-2007), zboard (09-06-2014)
Closed Thread


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 05:34.


Powered by vBulletin
Copyright ©2006-2019 - Sat Universe