Looking flash bin for ultimo.
Unsure of what you are asking for do you require a Bootloader or an image in .nfi format that can be loaded via RS232
http://archive.vuplus.com/image/2012/7.0/
There is only only one type of image used for the VU+ series of receivers and that is generally via USB flash method, in certain circumstances the Bootloader can become corrupt which would need an .nfi image file to be flashed via serial port
you can find the .nfi images for the Ultimo here:Code:http://archive.vuplus.com/image/2012/7.0/
Thx
Im using Broadcom studio and a crypress devolpment board as the jtag device have flash Samsung K9K8G08U0D.
Now looking Samsung K9K8G08U0D.xmlfor Broadcom Studio.
This is the one i use mate when jtagging ultimos
see attached
Thx @Ferret this file work
No problem mate
I made that file myself from the technical sheet spec for the nand.
Not that hard to do when you read the help files in bb3, done 3 ultimos with that file.
I usually flash the bootloader with bb3 then flash the image as normal via usb.
Next step write cfe_ultimo_20111103_Ver1.04RC1.bin and box not work i think must write all flash not only boot maybe you have full flash for Ultimo ?
My ultimo is very strange when connect usb update not work anythink voltage in port usb only lcd :
VU+
Still stop this.
@Ferret maybe share full flash 128mb for ultimo ?
I khnow is very slow read with Broadband Studio this flash but this is my last chance for me reanimation this box.
br
That is the cfe you need and there is no need for full flash bin.
What is the error message ? Screen shots please ? Im thinking you have hardware problem.
Sorry if i had a Ultimo now i would do you flash dump still dont think you should need it though.
What did you do to get the box in the state it is now ?