m vision help

1. download the last patch from gxmax.com
2.unzip that file and copy to usb flash memory
3.plug in usb to receiver
4. press fn key from remot control
5.select last patch then press ok
6. wait for download until the receiver show to you " good"

then go to menu :
0000 - Smartcard and emulator OFF
5555 - Only smartcard
6666 - Only emulator
9999 - Smartcard and emulator

enjoy

slash73 said:

hi thx 4 info but it dose not have a usb

Click to expand...

no problem

1. provid a rs232 cable or (null modem cable)
2. install to receiver from one side and install another side to pc
3.run loader " you can downld the laoder from this topic :M-Vision Tools "
4. browes file select that and press upgrad key

wait for finish and reciver show to you " good "

************************************************************

Updateing the stb with Box loader.

To update the box, you will need a null cable. Here is how you update.

1. Plug in the stb and leave in stand by.
2. But the null cable from the computer to the stb.
3. Start up box loader.
4. Click update software
5. Find the new software you want to send to the stb.
6. Click on it and then click open.
7. Then you will see the screen on the computer of the box loader will start moveing, all so on the stb on the channel you will see it counting to 100. When it has done. Wait for 30 sec as the box needs do do more you will see it count again and at the end you will see good in the window of the stb.

8. Turn off the stb and but it back on and see what the software it say in the window of the stb and if it say the one you have loaded you are done.

slash73 said:

sorry to be a pain iv just had a look at the back of it and it has an eathernet con on it can i update it with that

Click to expand...

whats your mean ?

i cant understand ?

connect your receiver to the internet with your ethernetport on the back of your receiver


Direct update for NET models :
NO LINK FOR UPLOAD


find in your menu the net url and type the url like above

goodluck

thanks

thanks